- Fix DPT+shmem combo and add i915.enable_dpt modparam (Ville)
- i915.enable_sagv module parameter (Ville)
- Correction to QGV related register addresses (Vinod)
- IPS debugfs per-crtc and new file for false_color (Ville)
- More clean-up and reorganization of Display code (Jani)
- DP DSC related fixes and improvements (Stanislav, Ankit, Suraj, Swati)
- Make utility pin asserts more accurate (Ville)
- Meteor Lake enabling (Daniele)
- High refresh rate PSR fixes (Jouni)
- Cursor and Plane chicken register fixes (Ville)
- Align the ADL-P TypeC sequences with hardware specification (Imre)
- Documentation build fixes and improvements to catch bugs earlier (Lee, Jani)
- PL1 power limit hwmon entry changed to use 0 as disabled state (Ashutosh)
- DP aux sync fix and improvements (Ville)
- DP MST fixes and w/a (Stanislav)
- Limit PXP drm-errors or warning on firmware API failures (Alan)

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZC7RR3Laet8ywHRo@intel.com

Include the device and connector information in the SCDC
debugs. Makes it easier to figure out who did what.

v2: Rely on connector->ddc (Maxime)

Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Emma Anholt <emma@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403223652.18848-1-ville.syrjala@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>

Add helper to check if the DP sink supports DSC with the given
o/p format.

v2: Add documentation for the helper. (Uma Shankar)

v3: /** instead of  /* (Uma Shankar)

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-2-suraj.kandpal@intel.com

Core Changes:
- drm: Add SDP Error Detection Configuration Register (Arun)

Driver Changes:
- Meteor Lake enabling and fixes (RK, Jose, Madhumitha)
- Lock the fbdev obj before vma pin (Tejas)
- DSC fixes (Stanislav)
- Fixes and clean-up on opregion code (Imre)
- More wm/vblank stuff (Ville)
- More general display code organization (Jani)
- DP Fixes (Stanislav, Ville)
- Introduce flags to ignore long HPD and link training issues \
  for handling spurious issues on CI (Vinod)
- Plane cleanups and extra registers (Ville)
- Update audio keepalive clock values (Clint)
- Rename find_section to bdb_find_section (Maarten)
- DP SDP CRC16 for 128b132b link layer (Arun)
- Fix various issues with noarm register writes (Ville)
- Fix a few TypeC / MST issues (Imre)
- Create GSC submission targeting HDCP and PXP usages on MTL+ (Suraj)
- Enable HDCP2.x via GSC CS (Suraj)

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZBy56qc9C00tCLOY@intel.com

DP2.0 E11 defines a new register to facilitate SDP error detection by a
128B/132B capable DPRX device.

v2: Update the macro name to reflect the DP spec(Harry)

Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302081532.765821-2-arun.r.murthy@intel.com

Add a function to get the old MST topology state, required by a
follow-up i915 patch.

While at it clarify the code comment of
drm_atomic_get_new_mst_topology_state() and add _new prefix
to the new state pointer to remind about its difference from the old
state.

v2: Use old_/new_ prefixes for the state pointers. (Ville)

Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org # 6.1
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-3-imre.deak@intel.com

Atm, drm_dp_remove_payload() uses the same payload state to both get the
vc_start_slot required for the payload removal DPCD message and to
deduct time_slots from vc_start_slot of all payloads after the one being
removed.

The above isn't always correct, as vc_start_slot must be the up-to-date
version contained in the new payload state, but time_slots must be the
one used when the payload was previously added, contained in the old
payload state. The new payload's time_slots can change vs. the old one
if the current atomic commit changes the corresponding mode.

This patch let's drivers pass the old and new payload states to
drm_dp_remove_payload(), but keeps these the same for now in all drivers
not to change the behavior. A follow-up i915 patch will pass in that
driver the correct old and new states to the function.

Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: stable@vger.kernel.org # 6.1
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-2-imre.deak@intel.com

drm/i915 feature pull #1 for v6.3:

Features and functionality:
- Meteorlake display enabling (Animesh, Luca, Stan, Jouni, Anusha)
- DP MST DSC support (Stan)
- Gamma/degamma readout support for the state checker (Ville)
- Enable SDP split support for DP 2.0 (Vinod)
- Add probe blocking support to i915.force_probe parameter (Rodrigo)
- Enable Xe HP 4tile support (Jonathan)

Refactoring and cleanups:
- Color refactoring, especially related to DSB usage (Ville)
- DSB refactoring (Ville)
- DVO refactoring (Ville)
- Backlight register and logging cleanups (Jani)
- Avoid display direct calls to uncore (Maarten, Jani)
- Add new "soc" sub-directory (Jani)
- Refactor DSC platform support checks (Swati)

Fixes:
- Interlace modes are no longer supported starting at display version 12 (Ankit)
- Use polling read for aux control (Arun)
- DMC firmware no longer requires specific versions (Gustavo)
- Fix PSR flickering and freeze issues (Jouni)
- Fix ICL+ DSI GPIO handling (Jani)
- Ratelimit errors in display engine irqs (Lucas)
- Fix DP MST DSC bpp and timeslot calculations (Stan)
- Fix CDCLK squash and crawl sequences (Ville, Anusha)
- Fix bigjoiner checks for fused pipes (Ville)
- Fix ADP+ degamma LUT size (Ville)
- Fix DVO ch7xxx and sil164 suspend/resume (Ville)
- Fix memory leak in VBT parsing (Xia Fukun)
- Fix VBT packet port selection for dual link DSI (Mikko Kovanen)
- Fix SDP infoframe product string for discrete graphics (Clint)
- Fix VLV/CHV HDMI/DP audio enable (Ville)
- Fix VRR delays and calculations (Ville)
- No longer disable transcoder for PHY test pattern change (Khaled)
- Fix dual PPS handling (Ville)
- Fix timeout and wait for DDI BUF CTL active after enabling (Ankit)

Merges:
- Backmerge drm-next to sync up with v6.2-rc1 (Jani)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87tu0wez34.fsf@intel.com

The missing DPCD definitions from DP2.0 spec is as follows:

DOWNSPREAD_CTRL (107h):
	FIXED_VTOTAL_AS_SDP_EN_IN_PR_ACTIVE (bit 6)
		For sink devices that support Adaptive-Sync operation
		and Panel Replay

DPRX_FEATURE_ENUMERATION_LIST_CONT_1 (2214h):
	ADAPTIVE_SYNC_SDP_SUPPORTED (bit 0)
		Bit to check sink device has Adaptive-Sync capability
	AS_SDP_FIRST_HALF_LINE_OR_3840_PIXEL_CYCLE_WINDOW_NOT_SUPPORTED (bit 1)
		A sink device that clears this bit will generate VSync pulse
		leading edge of the HDMI output on the line count at which
		Adaptive-Sync SDP is received as long as source device transmits
		Adaptive-Sync SDP either in first line or first 3840 pixel cycles
		of the line whichever occurs first.
	VSC_EXT_SDP_FRAMEWORK_VERSION_1_SUPPORTED (bit 4)
		Bit to check sink device has SDP framework version 1 capability

Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Adding DP DSC register definitions, we might need for further
DSC implementation, supporting MST and DP branch pass-through mode.

v2: - Fixed checkpatch comment warning
v3: - Removed function which is not yet used(Jani Nikula)

Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101094222.22091-2-stanislav.lisovskiy@intel.com