linux.git/include/asm-ppc/ppc_sys.h, branch master

powerpc: Remove arch/ppc and include/asm-ppc

2008-06-10T11:40:22+00:00

All the maintained platforms are now in arch/powerpc, so the old
arch/ppc stuff can now go away.

Acked-by: Adrian Bunk 
Acked-by: Arnd Bergmann 
Acked-by: Becky Bruce 
Acked-by: Benjamin Herrenschmidt 
Acked-by: Geert Uytterhoeven 
Acked-by: Grant Likely 
Acked-by: Jochen Friedrich 
Acked-by: John Linn 
Acked-by: Jon Loeliger 
Acked-by: Josh Boyer 
Acked-by: Kumar Gala 
Acked-by: Olof Johansson 
Acked-by: Peter Korsgaard 
Acked-by: Scott Wood 
Acked-by: Sean MacLennan 
Acked-by: Segher Boessenkool 
Acked-by: Stefan Roese 
Acked-by: Stephen Neuendorffer 
Acked-by: Wolfgang Denk 
Signed-off-by: Paul Mackerras

[PPC] Remove 85xx from arch/ppc

2008-01-28T14:33:10+00:00

85xx exists in arch/powerpc as well as cuImage support to boot from
a u-boot that doesn't support device trees.

Signed-off-by: Kumar Gala

[PPC] Remove 83xx from arch/ppc

2008-01-28T14:33:09+00:00

83xx exists in arch/powerpc as well as cuImage support to boot from
a u-boot that doesn't support device trees.

Signed-off-by: Kumar Gala

[POWERPC] Stop using ppc_sys for Xilinx Virtex boards

2007-04-30T01:02:04+00:00

The arch/ppc/syslib/ppc_sys.c infrastructure does not work well for the
virtex ports.  Move the ml300 and ml403 board ports over to use the new
virtex_devices infrastructure.

Signed-off-by: Grant Likely 
Acked-by: Peter Korsgaard 
Signed-off-by: Paul Mackerras

[PATCH] ppc32: odd fixes and improvements in ppc_sys

2006-04-28T11:05:16+00:00

This consists of offsets fix in ..._devices.c, and update of
ppc_sys_fixup_mem_resource() function to prevent subsequent fixups

Signed-off-by: Vitaly Bordug 
Signed-off-by: Paul Mackerras

[PATCH] ppc32: Make platform devices being able to assign functions

2006-02-10T05:52:46+00:00

Implemented by  modification of the .name field of the platform device,
when PDs with the
same names are to be used within different drivers, as
 -> :
Corresponding drivers should change the .name in struct device_driver to
reflect upper of course.

Added ppc_sys_device_disable/enable function set, making it easier to
disable all the inexistent/not utilized platform device way pdevs. By the
check of the "disabled" bit in the config field of ppc_sys_specs, disabled
platform devices will be either added/removed from the bus, or simply not
registered on it, depending on the time when disable/enable call asserted.

The default behaviour when nothing is disabled/enabled will be "all devices
are enabled", which is the same as before.

Also helper platform_notify_map function added, making assignment of
board-specific platform_info more consistent and generic.

Signed-off-by: Vitaly Bordug 
Signed-off-by: Marcelo Tosatti 
Signed-off-by: Paul Mackerras

[PATCH] powerpc: Migrate Xilinx Vertex support from the OCP bus to the platfom bus.

2006-02-07T11:35:58+00:00

This patch only deals with the serial port definitions as there is no
support for any other xilinx IP cores in the kernel tree at the moment.

Board specific configuration moved out of virtex.[ch] and into the
xparameters.h wrapper.

This also prepares for the transition to the flattened device tree model.
When the bootloader provides a device tree generated from an xparameters.h
files, the kernel will no longer need xparameters/*.  The platform bus will
get populated with data from the device tree, and the device drivers will
be automatically connected to the devices.  Only the bootloader (or
ppcboot) will need xparameters directly.

Signed-off-by: Grant C. Likely 
Signed-off-by: Paul Mackerras

[PATCH] Update email address for Kumar

2005-11-14T02:14:10+00:00

Changed jobs and the Freescale address is no longer valid.

Signed-off-by: Kumar Gala 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Create platform_device.h to contain all the platform device details.

2005-10-29T18:07:23+00:00

Convert everyone who uses platform_bus_type to include
linux/platform_device.h.

Signed-off-by: Russell King 
Acked-by: Greg Kroah-Hartman

[PATCH] ppc32: Add ppc_sys descriptions for PowerQUICC I devices

2005-09-17T18:50:01+00:00

Added ppc_sys device and system definitions for PowerQUICC I devices.  This
will allow drivers for PQI to be proper platform device drivers.  Currently
sys section contains only MPC885 and MPC866.  Identification should be done
with identify_ppc_sys_by_name call, with board-specific "name" string
passed, since PQI do not have any register that could identify the SOC.

Signed-off-by: Vitaly Bordug 
Signed-off-by: Kumar Gala 
Signed-off-by: Marcelo Tosatti 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds