linux.git/include/asm-ppc/mpc8xx.h, branch master

powerpc: Remove arch/ppc and include/asm-ppc

2008-06-10T11:40:22+00:00

All the maintained platforms are now in arch/powerpc, so the old
arch/ppc stuff can now go away.

Acked-by: Adrian Bunk 
Acked-by: Arnd Bergmann 
Acked-by: Becky Bruce 
Acked-by: Benjamin Herrenschmidt 
Acked-by: Geert Uytterhoeven 
Acked-by: Grant Likely 
Acked-by: Jochen Friedrich 
Acked-by: John Linn 
Acked-by: Jon Loeliger 
Acked-by: Josh Boyer 
Acked-by: Kumar Gala 
Acked-by: Olof Johansson 
Acked-by: Peter Korsgaard 
Acked-by: Scott Wood 
Acked-by: Sean MacLennan 
Acked-by: Segher Boessenkool 
Acked-by: Stefan Roese 
Acked-by: Stephen Neuendorffer 
Acked-by: Wolfgang Denk 
Signed-off-by: Paul Mackerras

[PPC] Remove mpc885ads and mpc86x ads boards from arch/ppc

2008-04-21T15:19:09+00:00

We have a board port in arch/powerpc so we dont need this one anymore.

Signed-off-by: Kumar Gala

[PATCH] ppc32: board-specific part of fs_enet update

2006-08-19T21:44:31+00:00

This contains board-specific portion to respect driver changes (for 8272ads ,
885ads and 866ads).  Altered platform_data structures as well as initial setup
routines relevant to fs_enet.

Changes to the mpc8560ads ppc/ code are also introduced, but mainly as
reference, since the entire board support is going to appear in arch/powerpc.

Signed-off-by: Vitaly Bordug 
Signed-off-by: Andrew Morton 
Signed-off-by: Jeff Garzik

Don't include linux/config.h from anywhere else in include/

2006-04-26T11:56:16+00:00

Signed-off-by: David Woodhouse

[PATCH] ppc32: Make platform devices being able to assign functions

2006-02-10T05:52:46+00:00

Implemented by  modification of the .name field of the platform device,
when PDs with the
same names are to be used within different drivers, as
 -> :
Corresponding drivers should change the .name in struct device_driver to
reflect upper of course.

Added ppc_sys_device_disable/enable function set, making it easier to
disable all the inexistent/not utilized platform device way pdevs. By the
check of the "disabled" bit in the config field of ppc_sys_specs, disabled
platform devices will be either added/removed from the bus, or simply not
registered on it, depending on the time when disable/enable call asserted.

The default behaviour when nothing is disabled/enabled will be "all devices
are enabled", which is the same as before.

Also helper platform_notify_map function added, making assignment of
board-specific platform_info more consistent and generic.

Signed-off-by: Vitaly Bordug 
Signed-off-by: Marcelo Tosatti 
Signed-off-by: Paul Mackerras

[PATCH] powerpc: generalize PPC44x_PIN_SIZE

2006-01-20T05:13:50+00:00

The following patch generalizes PPC44x_PIN_SIZE by changing it to
PPC_PIN_SIZE, which can be defined by any sub-arch to automatically adjust
VMALLOC_START.

Define PPC_PIN_SIZE on 8xx, avoiding potential conflicts with the
pinned space.

Signed-off-by: Marcelo Tosatti 
Signed-off-by: Paul Mackerras

[PATCH] ppc32: ppc_sys fixes for 8xx and 82xx

2005-10-29T04:49:29+00:00

This patch fixes a numbers of issues regarding to that both 8xx and 82xx
began to use ppc_sys model:
	- Platform is now identified by default deviceless SOC, if no
BOARD_CHIP_NAME is specified in the bard-specific header. For the list
of supported names refer to (arch/ppc/syslib/) mpc8xx_sys.c and
mpc82xx_sys.c for 8xx and 82xx respectively.
	- Fixed a bug in identification by name - if the name was not found,
it returned -1 instead of default deviceless ppc_spec.
	- fixed devices amount in the 8xx platform system descriptions

Signed-off-by: Vitaly Bordug 
Signed-off-by: Marcelo Tosatti 
Signed-off-by: Kumar Gala 
Signed-off-by: Andrew Morton 
Signed-off-by: Paul Mackerras

[PATCH] ppc32: Add ppc_sys descriptions for PowerQUICC I devices

2005-09-17T18:50:01+00:00

Added ppc_sys device and system definitions for PowerQUICC I devices.  This
will allow drivers for PQI to be proper platform device drivers.  Currently
sys section contains only MPC885 and MPC866.  Identification should be done
with identify_ppc_sys_by_name call, with board-specific "name" string
passed, since PQI do not have any register that could identify the SOC.

Signed-off-by: Vitaly Bordug 
Signed-off-by: Kumar Gala 
Signed-off-by: Marcelo Tosatti 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] ppc32: Remove board support for SPD823TS

2005-09-05T07:05:55+00:00

Support for the SPD823TS board is no longer maintained and thus being removed

Signed-off-by: Kumar Gala 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] ppc32: add Freescale MPC885ADS board support

2005-07-06T02:18:59+00:00

This patch adds the Freescale MPC86xADS board support.  The supported
devices are SMC UART and 10Mbit ethernet on SCC1.

The manual for the board says that it "is compatible with the MPC8xxFADS
for software point of view".  That's why this patch extends FADS instead of
introducing a new platform.

FEC is not supported as the "combined FCC/FEC ethernet driver" driver by
Pantelis Antoniou should replace the current FEC driver.

Signed-off-by: Gennadiy Kurtsman 
Signed-off-by: Andrei Konovalov 
Acked-by: Tom Rini 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds