linux.git/include/asm-ia64/machvec.h, branch master

[IA64] Move include/asm-ia64 to arch/ia64/include/asm

2008-08-01T17:21:21+00:00

After moving the the include files there were a few clean-ups:

1) Some files used #include , changed to 

2) Some comments alerted maintainers to look at various header files to
make matching updates if certain code were to be changed. Updated these
comments to use the new include paths.

3) Some header files mentioned their own names in initial comments. Just
deleted these self references.

Signed-off-by: Tony Luck

dma-mapping: add the device argument to dma_mapping_error()

2008-07-26T19:00:03+00:00

Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER
architecture does:

This enables us to cleanly fix the Calgary IOMMU issue that some devices
are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423).

I think that per-device dma_mapping_ops support would be also helpful for
KVM people to support PCI passthrough but Andi thinks that this makes it
difficult to support the PCI passthrough (see the above thread).  So I
CC'ed this to KVM camp.  Comments are appreciated.

A pointer to dma_mapping_ops to struct dev_archdata is added.  If the
pointer is non NULL, DMA operations in asm/dma-mapping.h use it.  If it's
NULL, the system-wide dma_ops pointer is used as before.

If it's useful for KVM people, I plan to implement a mechanism to register
a hook called when a new pci (or dma capable) device is created (it works
with hot plugging).  It enables IOMMUs to set up an appropriate
dma_mapping_ops per device.

The major obstacle is that dma_mapping_error doesn't take a pointer to the
device unlike other DMA operations.  So x86 can't have dma_mapping_ops per
device.  Note all the POWER IOMMUs use the same dma_mapping_error function
so this is not a problem for POWER but x86 IOMMUs use different
dma_mapping_error functions.

The first patch adds the device argument to dma_mapping_error.  The patch
is trivial but large since it touches lots of drivers and dma-mapping.h in
all the architecture.

This patch:

dma_mapping_error() doesn't take a pointer to the device unlike other DMA
operations.  So we can't have dma_mapping_ops per device.

Note that POWER already has dma_mapping_ops per device but all the POWER
IOMMUs use the same dma_mapping_error function.  x86 IOMMUs use device
argument.

[akpm@linux-foundation.org: fix sge]
[akpm@linux-foundation.org: fix svc_rdma]
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix bnx2x]
[akpm@linux-foundation.org: fix s2io]
[akpm@linux-foundation.org: fix pasemi_mac]
[akpm@linux-foundation.org: fix sdhci]
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix sparc]
[akpm@linux-foundation.org: fix ibmvscsi]
Signed-off-by: FUJITA Tomonori 
Cc: Muli Ben-Yehuda 
Cc: Andi Kleen 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: Avi Kivity 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[IA64] machvec support for SGI UV platform

2008-05-14T21:22:04+00:00

This patch adds the basic IA64 machvec infrastructure to support
the SGI "UV" platform.

Signed-off-by: Jack Steiner 
Signed-off-by: Tony Luck

dma/ia64: update ia64 machvecs, swiotlb.c

2008-04-29T15:06:12+00:00

Change all ia64 machvecs to use the new dma_*map*_attrs() interfaces.
Implement the old dma_*map_*() interfaces in terms of the corresponding new
interfaces.  For ia64/sn, make use of one dma attribute,
DMA_ATTR_WRITE_BARRIER.  Introduce swiotlb_*map*_attrs() functions.

Signed-off-by: Arthur Kepner 
Cc: Tony Luck 
Cc: Jesse Barnes 
Cc: Jes Sorensen 
Cc: Randy Dunlap 
Cc: Roland Dreier 
Cc: James Bottomley 
Cc: David Miller 
Cc: Benjamin Herrenschmidt 
Cc: Grant Grundler 
Cc: Michael Ellerman 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[IA64] SN2 needs platform specific irq_to_vector() function.

2007-08-13T17:31:26+00:00

Add base support for implementing platform_irq_to_vector(), and
then use it on SN2.

Signed-off-by: Kenji Kaneshige 
Acked-by: John Keller 
Signed-off-by: Tony Luck

[IA64] Ensure that machvec is set up takes place before serial console

2007-07-25T18:12:47+00:00

Parse the machvec command line option outside of the early_param()
so that ia64_mv is set before any console intialisation that
may result from early_param parsing.

Signed-off-by: Simon Horman 
Signed-off-by: Tony Luck

[PATCH] ia64: platform_kernel_launch_event is noop on generic kernel

2007-03-18T18:35:07+00:00

Add a missing #define for the platform_kernel_launch_event.  Without this
fix, a call to platform_kernel_launch_event() becomes a noop on generic
kernels.  SN systems require this fix to successfully kdump/kexec from
certain hardware errors.

[bwalle@suse.de: fix it]
Signed-off-by: John Keller 
Cc: Bernhard Walle 
Acked-by: Simon Horman 
Acked-by: Jay Lan 
Acked-by: "Luck, Tony" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

msi: Make MSI useable more architectures

2007-02-07T23:50:08+00:00

The arch hooks arch_setup_msi_irq and arch_teardown_msi_irq are now
responsible for allocating and freeing the linux irq in addition to
setting up the the linux irq to work with the interrupt.

arch_setup_msi_irq now takes a pci_device and a msi_desc and returns
an irq.

With this change in place this code should be useable by all platforms
except those that won't let the OS touch the hardware like ppc RTAS.

Signed-off-by: Eric W. Biederman 
Acked-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

[IA64] IA64 Kexec/kdump

2006-12-07T17:51:35+00:00

Changes and updates.

1. Remove fake rendz path and related code according to discuss with Khalid Aziz.
2. fc.i offset fix in relocate_kernel.S.
3. iospic shutdown code eoi and mask race fix from Fujitsu.
4. Warm boot hook in machine_kexec to SN SAL code from Jack Steiner.
5. Send slave to SAL slave loop patch from Jay Lan.
6. Kdump on non-recoverable MCA event patch from Jay Lan
7. Use CTL_UNNUMBERED in kdump_on_init sysctl.

Signed-off-by: Zou Nan hai 
Signed-off-by: Tony Luck

Altix: Add initial ACPI IO support

2006-12-01T22:36:57+00:00

First phase in introducing ACPI support to SN.
In this phase, when running with an ACPI capable PROM,
the DSDT will define the root busses and all SN nodes
(SGIHUB, SGITIO). An ACPI bus driver will be registered
for the node devices, with the acpi_pci_root_driver being
used for the root busses. An ACPI vendor descriptor is
now used to pass platform specific information for both
nodes and busses, eliminating the need for the current
SAL calls. Also, with ACPI support, SN fixup code is no longer
needed to initiate the PCI bus scans, as the acpi_pci_root_driver
does that.

However, to maintain backward compatibility with non-ACPI capable
PROMs, none of the current 'fixup' code can been deleted, though
much restructuring has been done. For example, the bulk of the code
in io_common.c is relocated code that is now common regardless
of what PROM is running, while io_acpi_init.c and io_init.c contain
routines specific to an ACPI or non ACPI capable PROM respectively.

A new pci bus fixup platform vector has been created to provide
a hook for invoking platform specific bus fixup from pcibios_fixup_bus().

The size of io_space[] has been increased to support systems with
large IO configurations.


Signed-off-by: John Keller 
Signed-off-by: Greg Kroah-Hartman