Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and remove all arch/*/include/asm/local64.h arch-specific files since they only #include <asm-generic/local64.h>. This fixes build errors on arch/c6x/ and arch/nios2/ for block/blk-iocost.c. Build-tested on 21 of 25 arch-es. (tools problems on the others) Yes, we could even rename <asm-generic/local64.h> to <linux/local64.h> and change all #includes to use <linux/local64.h> instead. Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull RISC-V updates from Palmer Dabbelt:
"We have a handful of new kernel features for 5.11:
- Support for the contiguous memory allocator.
- Support for IRQ Time Accounting
- Support for stack tracing
- Support for strict /dev/mem
- Support for kernel section protection
I'm being a bit conservative on the cutoff for this round due to the
timing, so this is all the new development I'm going to take for this
cycle (even if some of it probably normally would have been OK). There
are, however, some fixes on the list that I will likely be sending
along either later this week or early next week.
There is one issue in here: one of my test configurations
(PREEMPT{,_DEBUG}=y) fails to boot on QEMU 5.0.0 (from April) as of
the .text.init alignment patch.
With any luck we'll sort out the issue, but given how many bugs get
fixed all over the place and how unrelated those features seem my
guess is that we're just running into something that's been lurking
for a while and has already been fixed in the newer QEMU (though I
wouldn't be surprised if it's one of these implicit assumptions we
have in the boot flow). If it was hardware I'd be strongly inclined to
look more closely, but given that users can upgrade their simulators
I'm less worried about it"
* tag 'riscv-for-linus-5.11-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
arm64: Use the generic devmem_is_allowed()
arm: Use the generic devmem_is_allowed()
RISC-V: Use the new generic devmem_is_allowed()
lib: Add a generic version of devmem_is_allowed()
riscv: Fixed kernel test robot warning
riscv: kernel: Drop unused clean rule
riscv: provide memmove implementation
RISC-V: Move dynamic relocation section under __init
RISC-V: Protect all kernel sections including init early
RISC-V: Align the .init.text section
RISC-V: Initialize SBI early
riscv: Enable ARCH_STACKWALK
riscv: Make stack walk callback consistent with generic code
riscv: Cleanup stacktrace
riscv: Add HAVE_IRQ_TIME_ACCOUNTING
riscv: Enable CMA support
riscv: Ignore Image.* and loader.bin
riscv: Clean up boot dir
riscv: Fix compressed Image formats build
RISC-V: Add kernel image sections to the resource tree
Pull asm-generic mmu-context cleanup from Arnd Bergmann: "This is a cleanup series from Nicholas Piggin, preparing for later changes. The asm/mmu_context.h header are generalized and common code moved to asm-gneneric/mmu_context.h. This saves a bit of code and makes it easier to change in the future" * tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (25 commits) h8300: Fix generic mmu_context build m68k: mmu_context: Fix Sun-3 build xtensa: use asm-generic/mmu_context.h for no-op implementations x86: use asm-generic/mmu_context.h for no-op implementations um: use asm-generic/mmu_context.h for no-op implementations sparc: use asm-generic/mmu_context.h for no-op implementations sh: use asm-generic/mmu_context.h for no-op implementations s390: use asm-generic/mmu_context.h for no-op implementations riscv: use asm-generic/mmu_context.h for no-op implementations powerpc: use asm-generic/mmu_context.h for no-op implementations parisc: use asm-generic/mmu_context.h for no-op implementations openrisc: use asm-generic/mmu_context.h for no-op implementations nios2: use asm-generic/mmu_context.h for no-op implementations nds32: use asm-generic/mmu_context.h for no-op implementations mips: use asm-generic/mmu_context.h for no-op implementations microblaze: use asm-generic/mmu_context.h for no-op implementations m68k: use asm-generic/mmu_context.h for no-op implementations ia64: use asm-generic/mmu_context.h for no-op implementations hexagon: use asm-generic/mmu_context.h for no-op implementations csky: use asm-generic/mmu_context.h for no-op implementations ...
Pull asm-generic cleanups from Arnd Bergmann: "These are a couple of compiler warning fixes to make 'make W=2' less noisy, as well as some fixes to code comments in asm-generic" * tag 'asm-generic-cleanup-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: syscalls: Fix file comments for syscalls implemented in kernel/sys.c ctype.h: remove duplicate isdigit() helper qspinlock: use signed temporaries for cmpxchg asm-generic: fix ffs -Wshadow warning asm-generic: percpu: avoid Wshadow warning asm-generic/sembuf: Update architecture related information in comment
When building mpc885_ads_defconfig with gcc 10.1,
the function get_order() appears 50 times in vmlinux:
[linux]# ppc-linux-objdump -x vmlinux | grep get_order | wc -l
50
[linux]# size vmlinux
text data bss dec hex filename
3842620 675624 135160 4653404 47015c vmlinux
In the old days, marking a function 'static inline' was forcing GCC to
inline, but since commit ac7c3e4ff401 ("compiler: enable
CONFIG_OPTIMIZE_INLINING forcibly") GCC may decide to not inline a
function.
It looks like GCC 10 is taking poor decisions on this.
get_order() compiles into the following tiny function, occupying 20
bytes of text.
0000007c <get_order>:
7c: 38 63 ff ff addi r3,r3,-1
80: 54 63 a3 3e rlwinm r3,r3,20,12,31
84: 7c 63 00 34 cntlzw r3,r3
88: 20 63 00 20 subfic r3,r3,32
8c: 4e 80 00 20 blr
By forcing get_order() to be __always_inline, the size of text is
reduced by 1940 bytes, that is almost twice the space occupied by
50 times get_order()
[linux-powerpc]# size vmlinux
text data bss dec hex filename
3840680 675588 135176 4651444 46f9b4 vmlinux
Link: https://lkml.kernel.org/r/96c6172d619c51acc5c1c4884b80785c59af4102.1602949927.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull irq updates from Thomas Gleixner:
"Generic interrupt and irqchips subsystem updates. Unusually, there is
not a single completely new irq chip driver, just new DT bindings and
extensions of existing drivers to accomodate new variants!
Core:
- Consolidation and robustness changes for irq time accounting
- Cleanup and consolidation of irq stats
- Remove the fasteoi IPI flow which has been proved useless
- Provide an interface for converting legacy interrupt mechanism into
irqdomains
Drivers:
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM
optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups"
* tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling
driver core: platform: Add devm_platform_get_irqs_affinity()
ACPI: Drop acpi_dev_irqresource_disabled()
resource: Add irqresource_disabled()
genirq/affinity: Add irq_update_affinity_desc()
irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge
irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device
platform-msi: Track shared domain allocation
irqchip/ti-sci-intr: Fix freeing of irqs
irqchip/ti-sci-inta: Fix printing of inta id on probe success
drivers/irqchip: Remove EZChip NPS interrupt controller
Revert "genirq: Add fasteoi IPI flow"
irqchip/hip04: Make IPIs use handle_percpu_devid_irq()
irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq()
irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq()
irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq()
irqchip/ocelot: Add support for Jaguar2 platforms
irqchip/ocelot: Add support for Serval platforms
irqchip/ocelot: Add support for Luton platforms
irqchip/ocelot: prepare to support more SoC
...
Pull irqchip updates for 5.11 from Marc Zyngier: - Preliminary support for managed interrupts on platform devices - Correctly identify allocation of MSIs proxyied by another device - Remove the fasteoi IPI flow which has been proved useless - Generalise the Ocelot support to new SoCs - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation - Work around spurious interrupts on Qualcomm PDC - Random fixes and cleanups Link: https://lore.kernel.org/r/20201212135626.1479884-1-maz@kernel.org
Pull x86 apic updates from Thomas Gleixner:
"Yet another large set of x86 interrupt management updates:
- Simplification and distangling of the MSI related functionality
- Let IO/APIC construct the RTE entries from an MSI message instead
of having IO/APIC specific code in the interrupt remapping drivers
- Make the retrieval of the parent interrupt domain (vector or remap
unit) less hardcoded and use the relevant irqdomain callbacks for
selection.
- Allow the handling of more than 255 CPUs without a virtualized
IOMMU when the hypervisor supports it. This has made been possible
by the above modifications and also simplifies the existing
workaround in the HyperV specific virtual IOMMU.
- Cleanup of the historical timer_works() irq flags related
inconsistencies"
* tag 'x86-apic-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/ioapic: Cleanup the timer_works() irqflags mess
iommu/hyper-v: Remove I/O-APIC ID check from hyperv_irq_remapping_select()
iommu/amd: Fix IOMMU interrupt generation in X2APIC mode
iommu/amd: Don't register interrupt remapping irqdomain when IR is disabled
iommu/amd: Fix union of bitfields in intcapxt support
x86/ioapic: Correct the PCI/ISA trigger type selection
x86/ioapic: Use I/O-APIC ID for finding irqdomain, not index
x86/hyperv: Enable 15-bit APIC ID if the hypervisor supports it
x86/kvm: Enable 15-bit extension when KVM_FEATURE_MSI_EXT_DEST_ID detected
iommu/hyper-v: Disable IRQ pseudo-remapping if 15 bit APIC IDs are available
x86/apic: Support 15 bits of APIC ID in MSI where available
x86/ioapic: Handle Extended Destination ID field in RTE
iommu/vt-d: Simplify intel_irq_remapping_select()
x86: Kill all traces of irq_remapping_get_irq_domain()
x86/ioapic: Use irq_find_matching_fwspec() to find remapping irqdomain
x86/hpet: Use irq_find_matching_fwspec() to find remapping irqdomain
iommu/hyper-v: Implement select() method on remapping irqdomain
iommu/vt-d: Implement select() method on remapping irqdomain
iommu/amd: Implement select() method on remapping irqdomain
x86/apic: Add select() method on vector irqdomain
...
Pull kmap updates from Thomas Gleixner:
"The new preemtible kmap_local() implementation:
- Consolidate all kmap_atomic() internals into a generic
implementation which builds the base for the kmap_local() API and
make the kmap_atomic() interface wrappers which handle the
disabling/enabling of preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a
mapping is established. It has to disable migration instead to
guarantee that the virtual address of the mapped slot is the same
across preemption.
- Provide better debug facilities: guard pages and enforced
utilization of the mapping mechanics on 64bit systems when the
architecture allows it.
- Provide the new kmap_local() API which can now be used to cleanup
the kmap_atomic() usage sites all over the place. Most of the usage
sites do not require the implicit disabling of preemption and
pagefaults so the penalty on 64bit and 32bit non-highmem systems is
removed and quite some of the code can be simplified. A wholesale
conversion is not possible because some usage depends on the
implicit side effects and some need to be cleaned up because they
work around these side effects.
The migrate disable side effect is only effective on highmem
systems and when enforced debugging is enabled. On 64bit and 32bit
non-highmem systems the overhead is completely avoided"
* tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
ARM: highmem: Fix cache_is_vivt() reference
x86/crashdump/32: Simplify copy_oldmem_page()
io-mapping: Provide iomap_local variant
mm/highmem: Provide kmap_local*
sched: highmem: Store local kmaps in task struct
x86: Support kmap_local() forced debugging
mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL
microblaze/mm/highmem: Add dropped #ifdef back
xtensa/mm/highmem: Make generic kmap_atomic() work correctly
mm/highmem: Take kmap_high_get() properly into account
highmem: High implementation details and document API
Documentation/io-mapping: Remove outdated blurb
io-mapping: Cleanup atomic iomap
mm/highmem: Remove the old kmap_atomic cruft
highmem: Get rid of kmap_types.h
xtensa/mm/highmem: Switch to generic kmap atomic
sparc/mm/highmem: Switch to generic kmap atomic
powerpc/mm/highmem: Switch to generic kmap atomic
nds32/mm/highmem: Switch to generic kmap atomic
...
Pull perf/kprobes updates from Thomas Gleixner: "Make kretprobes lockless to avoid the rp->lock performance and potential lock ordering issues" * tag 'perf-kprobes-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/atomics: Regenerate the atomics-check SHA1's kprobes: Replace rp->free_instance with freelist freelist: Implement lockless freelist asm-generic/atomic: Add try_cmpxchg() fallbacks kprobes: Remove kretprobe hash llist: Add nonatomic __llist_add() and __llist_dell_all()