linux.git/include/asm-generic/vmlinux.lds.h, branch v6.1

Merge tag 'hardening-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

2022-11-11T19:41:02+00:00

Pull kernel hardening fix from Kees Cook:

 - Fix !SMP placement of '.data..decrypted' section (Nathan Chancellor)

* tag 'hardening-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  vmlinux.lds.h: Fix placement of '.data..decrypted' section

vmlinux.lds.h: Fix placement of '.data..decrypted' section

2022-11-08T17:59:19+00:00

Commit d4c639990036 ("vmlinux.lds.h: Avoid orphan section with !SMP")
fixed an orphan section warning by adding the '.data..decrypted' section
to the linker script under the PERCPU_DECRYPTED_SECTION define but that
placement introduced a panic with !SMP, as the percpu sections are not
instantiated with that configuration so attempting to access variables
defined with DEFINE_PER_CPU_DECRYPTED() will result in a page fault.

Move the '.data..decrypted' section to the DATA_MAIN define so that the
variables in it are properly instantiated at boot time with
CONFIG_SMP=n.

Cc: stable@vger.kernel.org
Fixes: d4c639990036 ("vmlinux.lds.h: Avoid orphan section with !SMP")
Link: https://lore.kernel.org/cbbd3548-880c-d2ca-1b67-5bb93b291d5f@huawei.com/
Debugged-by: Ard Biesheuvel 
Reported-by: Zhao Wenhui 
Tested-by: xiafukun 
Signed-off-by: Nathan Chancellor 
Signed-off-by: Kees Cook 
Link: https://lore.kernel.org/r/20221108174934.3384275-1-nathan@kernel.org

ftrace,kcfi: Separate ftrace_stub() and ftrace_stub_graph()

2022-10-20T15:10:27+00:00

Different function signatures means they needs to be different
functions; otherwise CFI gets upset.

As triggered by the ftrace boot tests:

  [] CFI failure at ftrace_return_to_handler+0xac/0x16c (target: ftrace_stub+0x0/0x14; expected type: 0x0a5d5347)

Fixes: 3c516f89e17e ("x86: Add support for CONFIG_CFI_CLANG")
Signed-off-by: Peter Zijlstra (Intel) 
Reviewed-by: Mark Rutland 
Tested-by: Mark Rutland 
Link: https://lkml.kernel.org/r/Y06dg4e1xF6JTdQq@hirez.programming.kicks-ass.net

Merge tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2022-10-08T00:04:10+00:00

Pull driver core updates from Greg KH:
 "Here is the big set of driver core and debug printk changes for
  6.1-rc1. Included in here is:

   - dynamic debug updates for the core and the drm subsystem. The drm
     changes have all been acked by the relevant maintainers

   - kernfs fixes for syzbot reported problems

   - kernfs refactors and updates for cgroup requirements

   - magic number cleanups and removals from the kernel tree (they were
     not being used and they really did not actually do anything)

   - other tiny cleanups

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (74 commits)
  docs: filesystems: sysfs: Make text and code for ->show() consistent
  Documentation: NBD_REQUEST_MAGIC isn't a magic number
  a.out: restore CMAGIC
  device property: Add const qualifier to device_get_match_data() parameter
  drm_print: add _ddebug descriptor to drm_*dbg prototypes
  drm_print: prefer bare printk KERN_DEBUG on generic fn
  drm_print: optimize drm_debug_enabled for jump-label
  drm-print: add drm_dbg_driver to improve namespace symmetry
  drm-print.h: include dyndbg header
  drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro
  drm_print: interpose drm_*dbg with forwarding macros
  drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers.
  drm_print: condense enum drm_debug_category
  debugfs: use DEFINE_SHOW_ATTRIBUTE to define debugfs_regset32_fops
  driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs()
  Documentation: ENI155_MAGIC isn't a magic number
  Documentation: NBD_REPLY_MAGIC isn't a magic number
  nbd: remove define-only NBD_MAGIC, previously magic number
  Documentation: FW_HEADER_MAGIC isn't a magic number
  Documentation: EEPROM_MAGIC_VALUE isn't a magic number
  ...

Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2022-10-04T20:38:03+00:00

Pull networking updates from Jakub Kicinski:
"Core:

- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.

- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.

- Shrink the size of the base zero-copy send structure.

- Move TCP init under a new slow / sleepable version of DO_ONCE().

BPF:

- Add BPF-specific, any-context-safe memory allocator.

- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.

- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).

- Allow targeting BPF iterators to loop through resources of one
task/thread.

- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.

- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.

- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.

- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).

- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.

- Support accessing network tunnel metadata's flags.

- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.

- Add support for writing to Netfilter's nf_conn:mark.

Protocols:

- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).

- vsock: improve support for SO_RCVLOWAT.

- SMC: support SO_REUSEPORT.

- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.

- IPSec: support collect metadata mode for xfrm interfaces.

- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.

- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).

- MPTCP: support TCP_FASTOPEN_CONNECT.

- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.

- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.

- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.

- TLS: support the Korean ARIA-GCM crypto algorithm.

- Remove DECnet support.

Driver API:

- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.

- Ethernet Power Sourcing Equipment and Power Device support.

- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.

- Support PHY rate matching - adapting between differing host-side
and link-side speeds.

- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.

- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.

- Require that flash component name used during update matches one of
the components for which version is reported by info_get().

- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.

- Support offload of TLS connections with 256 bit keys.

New hardware / drivers:

- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).

- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module

- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)

Drivers:

- CAN:
- gs_usb: HW timestamp support

- Ethernet PHYs:
- lan8814: cable diagnostics

- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit

- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support

- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz

- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips

- RealTek WiFi (rtw89):
- P2P support"

* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...

Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

2022-10-03T20:02:49+00:00

Daniel Borkmann says:

====================
pull-request: bpf-next 2022-10-03

We've added 143 non-merge commits during the last 27 day(s) which contain
a total of 151 files changed, 8321 insertions(+), 1402 deletions(-).

The main changes are:

1) Add kfuncs for PKCS#7 signature verification from BPF programs, from Roberto Sassu.

2) Add support for struct-based arguments for trampoline based BPF programs,
   from Yonghong Song.

3) Fix entry IP for kprobe-multi and trampoline probes under IBT enabled, from Jiri Olsa.

4) Batch of improvements to veristat selftest tool in particular to add CSV output,
   a comparison mode for CSV outputs and filtering, from Andrii Nakryiko.

5) Add preparatory changes needed for the BPF core for upcoming BPF HID support,
   from Benjamin Tissoires.

6) Support for direct writes to nf_conn's mark field from tc and XDP BPF program
   types, from Daniel Xu.

7) Initial batch of documentation improvements for BPF insn set spec, from Dave Thaler.

8) Add a new BPF_MAP_TYPE_USER_RINGBUF map which provides single-user-space-producer /
   single-kernel-consumer semantics for BPF ring buffer, from David Vernet.

9) Follow-up fixes to BPF allocator under RT to always use raw spinlock for the BPF
   hashtab's bucket lock, from Hou Tao.

10) Allow creating an iterator that loops through only the resources of one
    task/thread instead of all, from Kui-Feng Lee.

11) Add support for kptrs in the per-CPU arraymap, from Kumar Kartikeya Dwivedi.

12) Add a new kfunc helper for nf to set src/dst NAT IP/port in a newly allocated CT
    entry which is not yet inserted, from Lorenzo Bianconi.

13) Remove invalid recursion check for struct_ops for TCP congestion control BPF
    programs, from Martin KaFai Lau.

14) Fix W^X issue with BPF trampoline and BPF dispatcher, from Song Liu.

15) Fix percpu_counter leakage in BPF hashtab allocation error path, from Tetsuo Handa.

16) Various cleanups in BPF selftests to use preferred ASSERT_* macros, from Wang Yufen.

17) Add invocation for cgroup/connect{4,6} BPF programs for ICMP pings, from YiFei Zhu.

18) Lift blinding decision under bpf_jit_harden = 1 to bpf_capable(), from Yauheni Kaliuta.

19) Various libbpf fixes and cleanups including a libbpf NULL pointer deref, from Xin Liu.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (143 commits)
  net: netfilter: move bpf_ct_set_nat_info kfunc in nf_nat_bpf.c
  Documentation: bpf: Add implementation notes documentations to table of contents
  bpf, docs: Delete misformatted table.
  selftests/xsk: Fix double free
  bpftool: Fix error message of strerror
  libbpf: Fix overrun in netlink attribute iteration
  selftests/bpf: Fix spelling mistake "unpriviledged" -> "unprivileged"
  samples/bpf: Fix typo in xdp_router_ipv4 sample
  bpftool: Remove unused struct event_ring_info
  bpftool: Remove unused struct btf_attach_point
  bpf, docs: Add TOC and fix formatting.
  bpf, docs: Add Clang note about BPF_ALU
  bpf, docs: Move Clang notes to a separate file
  bpf, docs: Linux byteswap note
  bpf, docs: Move legacy packet instructions to a separate file
  selftests/bpf: Check -EBUSY for the recurred bpf_setsockopt(TCP_CONGESTION)
  bpf: tcp: Stop bpf_setsockopt(TCP_CONGESTION) in init ops to recur itself
  bpf: Refactor bpf_setsockopt(TCP_CONGESTION) handling into another function
  bpf: Move the "cdg" tcp-cc check to the common sol_tcp_sockopt()
  bpf: Add __bpf_prog_{enter,exit}_struct_ops for struct_ops trampoline
  ...
====================

Link: https://lore.kernel.org/r/20221003194915.11847-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski

cfi: Switch to -fsanitize=kcfi

2022-09-26T17:13:13+00:00

Switch from Clang's original forward-edge control-flow integrity
implementation to -fsanitize=kcfi, which is better suited for the
kernel, as it doesn't require LTO, doesn't use a jump table that
requires altering function references, and won't break cross-module
function address equality.

Signed-off-by: Sami Tolvanen 
Reviewed-by: Kees Cook 
Tested-by: Kees Cook 
Tested-by: Nathan Chancellor 
Acked-by: Peter Zijlstra (Intel) 
Tested-by: Peter Zijlstra (Intel) 
Signed-off-by: Kees Cook 
Link: https://lore.kernel.org/r/20220908215504.3686827-6-samitolvanen@google.com

vmlinux.lds.h: CFI: Reduce alignment of jump-table to function alignment

2022-09-23T12:39:01+00:00

Due to undocumented, hysterical raisins on x86, the CFI jump-table
sections in .text are needlessly aligned to PMD_SIZE in the vmlinux
linker script. When compiling a CFI-enabled arm64 kernel with a 64KiB
page-size, a PMD maps 512MiB of virtual memory and so the .text section
increases to a whopping 940MiB and blows the final Image up to 960MiB.
Others report a link failure.

Since the CFI jump-table requires only instruction alignment, reduce the
alignment directives to function alignment for parity with other parts
of the .text section. This reduces the size of the .text section for the
aforementioned 64KiB page size arm64 kernel to 19MiB for a much more
reasonable total Image size of 39MiB.

Cc: Sami Tolvanen 
Cc: Mark Rutland 
Cc: "Mohan Rao .vanimina" 
Cc: Kees Cook 
Cc: Nathan Chancellor 
Cc: 
Link: https://lore.kernel.org/all/CAL_GTzigiNOMYkOPX1KDnagPhJtFNqSK=1USNbS0wUL4PW6-Uw@mail.gmail.com/
Fixes: cf68fffb66d6 ("add support for Clang CFI")
Reviewed-by: Mark Rutland 
Tested-by: Mark Rutland 
Reviewed-by: Sami Tolvanen 
Reviewed-by: Kees Cook 
Link: https://lore.kernel.org/r/20220922215715.13345-1-will@kernel.org
Signed-off-by: Will Deacon

ftrace: Add HAVE_DYNAMIC_FTRACE_NO_PATCHABLE

2022-09-16T20:16:48+00:00

x86 will shortly start using -fpatchable-function-entry for purposes
other than ftrace, make sure the __patchable_function_entry section
isn't merged in the mcount_loc section.

Signed-off-by: Peter Zijlstra (Intel) 
Signed-off-by: Thomas Gleixner 
Signed-off-by: Jiri Olsa 
Signed-off-by: Daniel Borkmann 
Link: https://lore.kernel.org/bpf/20220903131154.420467-2-jolsa@kernel.org

kernel/module: add __dyndbg_classes section

2022-09-07T15:04:49+00:00

Add __dyndbg_classes section, using __dyndbg as a model. Use it:

vmlinux.lds.h:

KEEP the new section, which also silences orphan section warning on
loadable modules.  Add (__start_/__stop_)__dyndbg_classes linker
symbols for the c externs (below).

kernel/module/main.c:
- fill new fields in find_module_sections(), using section_objs()
- extend callchain prototypes
  to pass classes, length
  load_module(): pass new info to dynamic_debug_setup()
  dynamic_debug_setup(): new params, pass through to ddebug_add_module()

dynamic_debug.c:
- add externs to the linker symbols.

ddebug_add_module():
- It currently builds a debug_table, and *will* find and attach classes.

dynamic_debug_init():
- add class fields to the _ddebug_info cursor var: di.

Signed-off-by: Jim Cromie 
Link: https://lore.kernel.org/r/20220904214134.408619-16-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman