linux.git/fs/xfs, branch v4.11

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2017-04-09T15:26:21+00:00

Pull VFS fixes from Al Viro:
 "statx followup fixes and a fix for stack-smashing on alpha"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  alpha: fix stack smashing in old_adjtimex(2)
  statx: Include a mask for stx_attributes in struct statx
  statx: Reserve the top bit of the mask for future struct expansion
  xfs: report crtime and attribute flags to statx
  ext4: Add statx support
  statx: optimize copy of struct statx to userspace
  statx: remove incorrect part of vfs_statx() comment
  statx: reject unknown flags when using NULL path
  Documentation/filesystems: fix documentation for ->getattr()

xfs: fix kernel memory exposure problems

2017-04-03T19:22:39+00:00

Fix a memory exposure problems in inumbers where we allocate an array of
structures with holes, fail to zero the holes, then blindly copy the
kernel memory contents (junk and all) into userspace.

Signed-off-by: Darrick J. Wong 
Reviewed-by: Christoph Hellwig

xfs: Honor FALLOC_FL_KEEP_SIZE when punching ends of files

2017-04-03T19:22:29+00:00

When punching past EOF on XFS, fallocate(mode=PUNCH_HOLE|KEEP_SIZE) will
round the file size up to the nearest multiple of PAGE_SIZE:

  calvinow@vm-disks/generic-xfs-1 ~$ dd if=/dev/urandom of=test bs=2048 count=1
  calvinow@vm-disks/generic-xfs-1 ~$ stat test
    Size: 2048            Blocks: 8          IO Block: 4096   regular file
  calvinow@vm-disks/generic-xfs-1 ~$ fallocate -n -l 2048 -o 2048 -p test
  calvinow@vm-disks/generic-xfs-1 ~$ stat test
    Size: 4096            Blocks: 8          IO Block: 4096   regular file

Commit 3c2bdc912a1cc050 ("xfs: kill xfs_zero_remaining_bytes") replaced
xfs_zero_remaining_bytes() with calls to iomap helpers. The new helpers
don't enforce that [pos,offset) lies strictly on [0,i_size) when being
called from xfs_free_file_space(), so by "leaking" these ranges into
xfs_zero_range() we get this buggy behavior.

Fix this by reintroducing the checks xfs_zero_remaining_bytes() did
against i_size at the bottom of xfs_free_file_space().

Reported-by: Aaron Gao 
Fixes: 3c2bdc912a1cc050 ("xfs: kill xfs_zero_remaining_bytes")
Cc: Christoph Hellwig 
Cc: Brian Foster 
Cc:  # 4.8+
Signed-off-by: Calvin Owens 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Darrick J. Wong 
Signed-off-by: Darrick J. Wong

xfs: rework the inline directory verifiers

2017-04-03T19:22:20+00:00

The inline directory verifiers should be called on the inode fork data,
which means after iformat_local on the read side, and prior to
ifork_flush on the write side.  This makes the fork verifier more
consistent with the way buffer verifiers work -- i.e. they will operate
on the memory buffer that the code will be reading and writing directly.

Furthermore, revise the verifier function to return -EFSCORRUPTED so
that we don't flood the logs with corruption messages and assert
notices.  This has been a particular problem with xfs/348, which
triggers the XFS_WANT_CORRUPTED_RETURN assertions, which halts the
kernel when CONFIG_XFS_DEBUG=y.  Disk corruption isn't supposed to do
that, at least not in a verifier.

Reviewed-by: Brian Foster 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Darrick J. Wong

xfs: report crtime and attribute flags to statx

2017-04-03T05:05:59+00:00

statx has the ability to report inode creation times and inode flags, so
hook up di_crtime and di_flags to that functionality.

Signed-off-by: Darrick J. Wong 
Signed-off-by: David Howells 
Signed-off-by: Al Viro

xfs: verify inline directory data forks

2017-03-15T07:24:25+00:00

When we're reading or writing the data fork of an inline directory,
check the contents to make sure we're not overflowing buffers or eating
garbage data.  xfs/348 corrupts an inline symlink into an inline
directory, triggering a buffer overflow bug.

Signed-off-by: Darrick J. Wong 
Reviewed-by: Brian Foster 
---
v2: add more checks consistent with _dir2_sf_check and make the verifier
usable from anywhere.

xfs: try any AG when allocating the first btree block when reflinking

2017-03-08T18:38:53+00:00

When a reflink operation causes the bmap code to allocate a btree block
we're currently doing single-AG allocations due to having ->firstblock
set and then try any higher AG due a little reflink quirk we've put in
when adding the reflink code.  But given that we do not have a minleft
reservation of any kind in this AG we can still not have any space in
the same or higher AG even if the file system has enough free space.
To fix this use a XFS_ALLOCTYPE_FIRST_AG allocation in this fall back
path instead.

[And yes, we need to redo this properly instead of piling hacks over
 hacks.  I'm working on that, but it's not going to be a small series.
 In the meantime this fixes the customer reported issue]

Also add a warning for failing allocations to make it easier to debug.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Darrick J. Wong 
Signed-off-by: Darrick J. Wong

xfs: use iomap new flag for newly allocated delalloc blocks

2017-03-08T17:58:08+00:00

Commit fa7f138 ("xfs: clear delalloc and cache on buffered write
failure") fixed one regression in the iomap error handling code and
exposed another. The fundamental problem is that if a buffered write
is a rewrite of preexisting delalloc blocks and the write fails, the
failure handling code can punch out preexisting blocks with valid
file data.

This was reproduced directly by sub-block writes in the LTP
kernel/syscalls/write/write03 test. A first 100 byte write allocates
a single block in a file. A subsequent 100 byte write fails and
punches out the block, including the data successfully written by
the previous write.

To address this problem, update the ->iomap_begin() handler to
distinguish newly allocated delalloc blocks from preexisting
delalloc blocks via the IOMAP_F_NEW flag. Use this flag in the
->iomap_end() handler to decide when a failed or short write should
punch out delalloc blocks.

This introduces the subtle requirement that ->iomap_begin() should
never combine newly allocated delalloc blocks with existing blocks
in the resulting iomap descriptor. This can occur when a new
delalloc reservation merges with a neighboring extent that is part
of the current write, for example. Therefore, drop the
post-allocation extent lookup from xfs_bmapi_reserve_delalloc() and
just return the record inserted into the fork. This ensures only new
blocks are returned and thus that preexisting delalloc blocks are
always handled as "found" blocks and not punched out on a failed
rewrite.

Reported-by: Xiong Zhou 
Signed-off-by: Brian Foster 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Darrick J. Wong 
Signed-off-by: Darrick J. Wong

xfs: remove kmem_zalloc_greedy

2017-03-08T04:10:50+00:00

The sole remaining caller of kmem_zalloc_greedy is bulkstat, which uses
it to grab 1-4 pages for staging of inobt records.  The infinite loop in
the greedy allocation function is causing hangs[1] in generic/269, so
just get rid of the greedy allocator in favor of kmem_zalloc_large.
This makes bulkstat somewhat more likely to ENOMEM if there's really no
pages to spare, but eliminates a source of hangs.

[1] http://lkml.kernel.org/r/20170301044634.rgidgdqqiiwsmfpj%40XZHOUW.usersys.redhat.com

Signed-off-by: Darrick J. Wong 
Reviewed-by: Christoph Hellwig 
---
v2: remove single-page fallback

xfs: Use xfs_icluster_size_fsb() to calculate inode alignment mask

2017-03-08T04:10:50+00:00

When block size is larger than inode cluster size, the call to
XFS_B_TO_FSBT(mp, mp->m_inode_cluster_size) returns 0. Also, mkfs.xfs
would have set xfs_sb->sb_inoalignmt to 0. Hence in
xfs_set_inoalignment(), xfs_mount->m_inoalign_mask gets initialized to
-1 instead of 0. However, xfs_mount->m_sinoalign would get correctly
intialized to 0 because for every positive value of xfs_mount->m_dalign,
the condition "!(mp->m_dalign & mp->m_inoalign_mask)" would evaluate to
false.

Also, xfs_imap() worked fine even with xfs_mount->m_inoalign_mask having
-1 as the value because blks_per_cluster variable would have the value 1
and hence we would never have a need to use xfs_mount->m_inoalign_mask
to compute the inode chunk's agbno and offset within the chunk.

Signed-off-by: Chandan Rajendra 
Reviewed-by: Darrick J. Wong 
Signed-off-by: Darrick J. Wong