linux.git/fs/sysfs/file.c, branch v4.17

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk

2018-02-01T21:36:15+00:00

Pull printk updates from Petr Mladek:

 - Add a console_msg_format command line option:

     The value "default" keeps the old "[time stamp] text\n" format. The
     value "syslog" allows to see the syslog-like "[timestamp] text" format.

     This feature was requested by people doing regression tests, for
     example, 0day robot. They want to have both filtered and full logs
     at hands.

 - Reduce the risk of softlockup:

     Pass the console owner in a busy loop.

     This is a new approach to the old problem. It was first proposed by
     Steven Rostedt on Kernel Summit 2017. It marks a context in which
     the console_lock owner calls console drivers and could not sleep.
     On the other side, printk() callers could detect this state and use
     a busy wait instead of a simple console_trylock(). Finally, the
     console_lock owner checks if there is a busy waiter at the end of
     the special context and eventually passes the console_lock to the
     waiter.

     The hand-off works surprisingly well and helps in many situations.
     Well, there is still a possibility of the softlockup, for example,
     when the flood of messages stops and the last owner still has too
     much to flush.

     There is increasing number of people having problems with
     printk-related softlockups. We might eventually need to get better
     solution. Anyway, this looks like a good start and promising
     direction.

 - Do not allow to schedule in console_unlock() called from printk():

     This reverts an older controversial commit. The reschedule helped
     to avoid softlockups. But it also slowed down the console output.
     This patch is obsoleted by the new console waiter logic described
     above. In fact, the reschedule made the hand-off less effective.

 - Deprecate "%pf" and "%pF" format specifier:

     It was needed on ia64, ppc64 and parisc64 to dereference function
     descriptors and show the real function address. It is done
     transparently by "%ps" and "pS" format specifier now.

     Sergey Senozhatsky found that all the function descriptors were in
     a special elf section and could be easily detected.

 - Remove printk_symbol() API:

     It has been obsoleted by "%pS" format specifier, and this change
     helped to remove few continuous lines and a less intuitive old API.

 - Remove redundant memsets:

     Sergey removed unnecessary memset when processing printk.devkmsg
     command line option.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (27 commits)
  printk: drop redundant devkmsg_log_str memsets
  printk: Never set console_may_schedule in console_trylock()
  printk: Hide console waiter logic into helpers
  printk: Add console owner and waiter logic to load balance console writes
  kallsyms: remove print_symbol() function
  checkpatch: add pF/pf deprecation warning
  symbol lookup: introduce dereference_symbol_descriptor()
  parisc64: Add .opd based function descriptor dereference
  powerpc64: Add .opd based function descriptor dereference
  ia64: Add .opd based function descriptor dereference
  sections: split dereference_function_descriptor()
  openrisc: Fix conflicting types for _exext and _stext
  lib: do not use print_symbol()
  irq debug: do not use print_symbol()
  sysfs: do not use print_symbol()
  drivers: do not use print_symbol()
  x86: do not use print_symbol()
  unicore32: do not use print_symbol()
  sh: do not use print_symbol()
  mn10300: do not use print_symbol()
  ...

sysfs: use SPDX identifiers

2018-01-23T09:19:10+00:00

Move the license "mark" of the sysfs files to be in SPDX form, instead
of the custom text that it currently is in.  This is in a quest to get
rid of the 700+ different ways we say "GPLv2" in the kernel tree.

Signed-off-by: Greg Kroah-Hartman

sysfs: do not use print_symbol()

2018-01-05T14:23:59+00:00

print_symbol() is a very old API that has been obsoleted by %pS format
specifier in a normal printk() call.

Replace print_symbol() with a direct printk("%pS") call.

Link: http://lkml.kernel.org/r/20171211125025.2270-11-sergey.senozhatsky@gmail.com
To: Andrew Morton 
To: Russell King 
To: Catalin Marinas 
To: Mark Salter 
To: Tony Luck 
To: David Howells 
To: Yoshinori Sato 
To: Guan Xuetao 
To: Borislav Petkov 
To: Greg Kroah-Hartman 
To: Thomas Gleixner 
To: Peter Zijlstra 
To: Vineet Gupta 
To: Fengguang Wu 
Cc: Steven Rostedt 
Cc: Petr Mladek 
Cc: LKML 
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-am33-list@redhat.com
Cc: linux-sh@vger.kernel.org
Cc: linux-edac@vger.kernel.org
Cc: x86@kernel.org
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Sergey Senozhatsky 
[pmladek@suse.com: updated commit message]
Signed-off-by: Petr Mladek

sysfs: be careful of error returns from ops->show()

2017-04-08T15:33:32+00:00

ops->show() can return a negative error code.
Commit 65da3484d9be ("sysfs: correctly handle short reads on PREALLOC attrs.")
(in v4.4) caused this to be stored in an unsigned 'size_t' variable, so errors
would look like large numbers.
As a result, if an error is returned, sysfs_kf_read() will return the
value of 'count', typically 4096.

Commit 17d0774f8068 ("sysfs: correctly handle read offset on PREALLOC attrs")
(in v4.8) extended this error to use the unsigned large 'len' as a size for
memmove().
Consequently, if ->show returns an error, then the first read() on the
sysfs file will return 4096 and could return uninitialized memory to
user-space.
If the application performs a subsequent read, this will trigger a memmove()
with extremely large count, and is likely to crash the machine is bizarre ways.

This bug can currently only be triggered by reading from an md
sysfs attribute declared with __ATTR_PREALLOC() during the
brief period between when mddev_put() deletes an mddev from
the ->all_mddevs list, and when mddev_delayed_delete() - which is
scheduled on a workqueue - completes.
Before this, an error won't be returned by the ->show()
After this, the ->show() won't be called.

I can reproduce it reliably only by putting delay like
	usleep_range(500000,700000);
early in mddev_delayed_delete(). Then after creating an
md device md0 run
  echo clear > /sys/block/md0/md/array_state; cat /sys/block/md0/md/array_state

The bug can be triggered without the usleep.

Fixes: 65da3484d9be ("sysfs: correctly handle short reads on PREALLOC attrs.")
Fixes: 17d0774f8068 ("sysfs: correctly handle read offset on PREALLOC attrs")
Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown 
Acked-by: Tejun Heo 
Reported-and-tested-by: Miroslav Benes 
Signed-off-by: Greg Kroah-Hartman

sysfs: correctly handle read offset on PREALLOC attrs

2016-08-31T13:14:44+00:00

Attributes declared with __ATTR_PREALLOC use sysfs_kf_read() which returns
zero bytes for non-zero offset. This breaks script checkarray in mdadm tool
in debian where /bin/sh is 'dash' because its builtin 'read' reads only one
byte at a time. Script gets 'i' instead of 'idle' when reads current action
from /sys/block/$dev/md/sync_action and as a result does nothing.

This patch adds trivial implementation of partial read: generate whole
string and move required part into buffer head.

Signed-off-by: Konstantin Khlebnikov 
Fixes: 4ef67a8c95f3 ("sysfs/kernfs: make read requests on pre-alloc files use the buffer.")
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=787950
Cc: Stable  # v3.19+
Acked-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

sysfs: correctly handle short reads on PREALLOC attrs.

2015-10-04T18:42:22+00:00

attributes declared with __ATTR_PREALLOC use sysfs_kf_read()
which ignores the 'count' arg.
So a 1-byte read request can return more bytes than that.

This is seen with the 'dash' shell when 'read' is used on
some 'md' sysfs attributes.

So only return the 'min' of count and the attribute length.

Signed-off-by: NeilBrown 
Acked-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

fs: sysfs: don't pass count == 0 to bin file readers

2015-06-01T01:17:17+00:00

If count == 0 bytes are requested by a reader, sysfs_kf_bin_read()
deliberately returns 0 without passing a potentially harmful value to
some externally defined underlying battr->read() function.

However in case of (pos == size && count) the next clause always sets
count to 0 and this value is handed over to battr->read().

The change intends to make obsolete (and remove later) a redundant
sanity check in battr->read(), if it is present, or add more
protection to struct bin_attribute users, who does not care about
input arguments.

Signed-off-by: Vladimir Zapolskiy 
Acked-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

kernfs: remove KERNFS_STATIC_NAME

2015-02-14T05:21:36+00:00

When a new kernfs node is created, KERNFS_STATIC_NAME is used to avoid
making a separate copy of its name.  It's currently only used for sysfs
attributes whose filenames are required to stay accessible and unchanged.
There are rare exceptions where these names are allocated and formatted
dynamically but for the vast majority of cases they're consts in the
rodata section.

Now that kernfs is converted to use kstrdup_const() and kfree_const(),
there's little point in keeping KERNFS_STATIC_NAME around.  Remove it.

Signed-off-by: Tejun Heo 
Cc: Andrzej Hajda 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

sysfs/kernfs: make read requests on pre-alloc files use the buffer.

2014-11-07T18:54:38+00:00

To match the previous patch which used the pre-alloc buffer for
writes, this patch causes reads to use the same buffer.
This is not strictly necessary as the current seq_read() will allocate
on first read, so user-space can trigger the required pre-alloc.  But
consistency is valuable.

The read function is somewhat simpler than seq_read() and, for example,
does not support reading from an offset into the file: reads must be
at the start of the file.

As seq_read() does not use the prealloc buffer, ->seq_show is
incompatible with ->prealloc and caused an EINVAL return from open().
sysfs code which calls into kernfs always chooses the correct function.

As the buffer is shared with writes and other reads, the mutex is
extended to cover the copy_to_user.

Signed-off-by: NeilBrown 
Reviewed-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

sysfs/kernfs: allow attributes to request write buffer be pre-allocated.

2014-11-07T18:53:25+00:00

md/raid allows metadata management to be performed in user-space.
A various times, particularly on device failure, the metadata needs
to be updated before further writes can be permitted.
This means that the user-space program which updates metadata much
not block on writeout, and so must not allocate memory.

mlockall(MCL_CURRENT|MCL_FUTURE) and pre-allocation can avoid all
memory allocation issues for user-memory, but that does not help
kernel memory.
Several kernel objects can be pre-allocated.  e.g. files opened before
any writes to the array are permitted.
However some kernel allocation happens in places that cannot be
pre-allocated.
In particular, writes to sysfs files (to tell md that it can now
allow writes to the array) allocate a buffer using GFP_KERNEL.

This patch allows attributes to be marked as "PREALLOC".  In that case
the maximal buffer is allocated when the file is opened, and then used
on each write instead of allocating a new buffer.

As the same buffer is now shared for all writes on the same file
description, the mutex is extended to cover full use of the buffer
including the copy_from_user().

The new __ATTR_PREALLOC() 'or's a new flag in to the 'mode', which is
inspected by sysfs_add_file_mode_ns() to determine if the file should be
marked as requiring prealloc.

Despite the comment, we *do* use ->seq_show together with ->prealloc
in this patch.  The next patch fixes that.

Signed-off-by: NeilBrown  
Reviewed-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman