linux.git/fs/proc/task_mmu.c, branch v3.16

Merge branch 'next' (accumulated 3.16 merge window patches) into master

2014-06-08T18:31:16+00:00

Now that 3.15 is released, this merges the 'next' branch into 'master',
bringing us to the normal situation where my 'master' branch is the
merge window.

* accumulated work in next: (6809 commits)
  ufs: sb mutex merge + mutex_destroy
  powerpc: update comments for generic idle conversion
  cris: update comments for generic idle conversion
  idle: remove cpu_idle() forward declarations
  nbd: zero from and len fields in NBD_CMD_DISCONNECT.
  mm: convert some level-less printks to pr_*
  MAINTAINERS: adi-buildroot-devel is moderated
  MAINTAINERS: add linux-api for review of API/ABI changes
  mm/kmemleak-test.c: use pr_fmt for logging
  fs/dlm/debug_fs.c: replace seq_printf by seq_puts
  fs/dlm/lockspace.c: convert simple_str to kstr
  fs/dlm/config.c: convert simple_str to kstr
  mm: mark remap_file_pages() syscall as deprecated
  mm: memcontrol: remove unnecessary memcg argument from soft limit functions
  mm: memcontrol: clean up memcg zoneinfo lookup
  mm/memblock.c: call kmemleak directly from memblock_(alloc|free)
  mm/mempool.c: update the kmemleak stack trace for mempool allocations
  lib/radix-tree.c: update the kmemleak stack trace for radix tree allocations
  mm: introduce kmemleak_update_trace()
  mm/kmemleak.c: use %u to print ->checksum
  ...

fs/proc/task_mmu.c: replace seq_printf by seq_puts

2014-06-06T23:08:12+00:00

Signed-off-by: Fabian Frederick 
Cc: Pavel Emelyanov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: add !pte_present() check on existing hugetlb_entry callbacks

2014-06-06T20:21:16+00:00

The age table walker doesn't check non-present hugetlb entry in common
path, so hugetlb_entry() callbacks must check it.  The reason for this
behavior is that some callers want to handle it in its own way.

[ I think that reason is bogus, btw - it should just do what the regular
  code does, which is to call the "pte_hole()" function for such hugetlb
  entries  - Linus]

However, some callers don't check it now, which causes unpredictable
result, for example when we have a race between migrating hugepage and
reading /proc/pid/numa_maps.  This patch fixes it by adding !pte_present
checks on buggy callbacks.

This bug exists for years and got visible by introducing hugepage
migration.

ChangeLog v2:
- fix if condition (check !pte_present() instead of pte_present())

Reported-by: Sasha Levin 
Signed-off-by: Naoya Horiguchi 
Cc: Rik van Riel 
Cc:  [3.12+]
Signed-off-by: Andrew Morton 
[ Backported to 3.15.  Signed-off-by: Josh Boyer  ]
Signed-off-by: Linus Torvalds

Merge branch 'x86/vdso' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

2014-06-05T15:05:29+00:00

Pull x86 cdso updates from Peter Anvin:
 "Vdso cleanups and improvements largely from Andy Lutomirski.  This
  makes the vdso a lot less ''special''"

* 'x86/vdso' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso, build: Make LE access macros clearer, host-safe
  x86/vdso, build: Fix cross-compilation from big-endian architectures
  x86/vdso, build: When vdso2c fails, unlink the output
  x86, vdso: Fix an OOPS accessing the HPET mapping w/o an HPET
  x86, mm: Replace arch_vma_name with vm_ops->name for vsyscalls
  x86, mm: Improve _install_special_mapping and fix x86 vdso naming
  mm, fs: Add vm_ops->name as an alternative to arch_vma_name
  x86, vdso: Fix an OOPS accessing the HPET mapping w/o an HPET
  x86, vdso: Remove vestiges of VDSO_PRELINK and some outdated comments
  x86, vdso: Move the vvar and hpet mappings next to the 64-bit vDSO
  x86, vdso: Move the 32-bit vdso special pages after the text
  x86, vdso: Reimplement vdso.so preparation in build-time C
  x86, vdso: Move syscall and sysenter setup into kernel/cpu/common.c
  x86, vdso: Clean up 32-bit vs 64-bit vdso params
  x86, mm: Ensure correct alignment of the fixmap

mm: softdirty: clear VM_SOFTDIRTY flag inside clear_refs_write() instead of clear_soft_dirty()

2014-06-04T23:53:56+00:00

clear_refs_write() is called earlier than clear_soft_dirty() and it is
more natural to clear VM_SOFTDIRTY (which belongs to VMA entry but not
PTEs) that early instead of clearing it a way deeper inside call chain.

Signed-off-by: Cyrill Gorcunov 
Cc: Pavel Emelyanov 
Cc: Hugh Dickins 
Cc: Naoya Horiguchi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm, fs: Add vm_ops->name as an alternative to arch_vma_name

2014-05-20T18:36:31+00:00

arch_vma_name sucks.  It's a silly hack, and it's annoying to
implement correctly.  In fact, AFAICS, even the straightforward x86
implementation is incorrect (I suspect that it breaks if the vdso
mapping is split or gets remapped).

This adds a new vm_ops->name operation that can replace it.  The
followup patches will remove all uses of arch_vma_name on x86,
fixing a couple of annoyances in the process.

Signed-off-by: Andy Lutomirski 
Link: http://lkml.kernel.org/r/2eee21791bb36a0a408c5c2bdb382a9e6a41ca4a.1400538962.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin

mm: per-thread vma caching

2014-04-07T23:35:53+00:00

This patch is a continuation of efforts trying to optimize find_vma(),
avoiding potentially expensive rbtree walks to locate a vma upon faults.
The original approach (https://lkml.org/lkml/2013/11/1/410), where the
largest vma was also cached, ended up being too specific and random,
thus further comparison with other approaches were needed.  There are
two things to consider when dealing with this, the cache hit rate and
the latency of find_vma().  Improving the hit-rate does not necessarily
translate in finding the vma any faster, as the overhead of any fancy
caching schemes can be too high to consider.

We currently cache the last used vma for the whole address space, which
provides a nice optimization, reducing the total cycles in find_vma() by
up to 250%, for workloads with good locality.  On the other hand, this
simple scheme is pretty much useless for workloads with poor locality.
Analyzing ebizzy runs shows that, no matter how many threads are
running, the mmap_cache hit rate is less than 2%, and in many situations
below 1%.

The proposed approach is to replace this scheme with a small per-thread
cache, maximizing hit rates at a very low maintenance cost.
Invalidations are performed by simply bumping up a 32-bit sequence
number.  The only expensive operation is in the rare case of a seq
number overflow, where all caches that share the same address space are
flushed.  Upon a miss, the proposed replacement policy is based on the
page number that contains the virtual address in question.  Concretely,
the following results are seen on an 80 core, 8 socket x86-64 box:

1) System bootup: Most programs are single threaded, so the per-thread
   scheme does improve ~50% hit rate by just adding a few more slots to
   the cache.

+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline       | 50.61%   | 19.90            |
| patched        | 73.45%   | 13.58            |
+----------------+----------+------------------+

2) Kernel build: This one is already pretty good with the current
   approach as we're dealing with good locality.

+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline       | 75.28%   | 11.03            |
| patched        | 88.09%   | 9.31             |
+----------------+----------+------------------+

3) Oracle 11g Data Mining (4k pages): Similar to the kernel build workload.

+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline       | 70.66%   | 17.14            |
| patched        | 91.15%   | 12.57            |
+----------------+----------+------------------+

4) Ebizzy: There's a fair amount of variation from run to run, but this
   approach always shows nearly perfect hit rates, while baseline is just
   about non-existent.  The amounts of cycles can fluctuate between
   anywhere from ~60 to ~116 for the baseline scheme, but this approach
   reduces it considerably.  For instance, with 80 threads:

+----------------+----------+------------------+
| caching scheme | hit-rate | cycles (billion) |
+----------------+----------+------------------+
| baseline       | 1.06%    | 91.54            |
| patched        | 99.97%   | 14.18            |
+----------------+----------+------------------+

[akpm@linux-foundation.org: fix nommu build, per Davidlohr]
[akpm@linux-foundation.org: document vmacache_valid() logic]
[akpm@linux-foundation.org: attempt to untangle header files]
[akpm@linux-foundation.org: add vmacache_find() BUG_ON]
[hughd@google.com: add vmacache_valid_mm() (from Oleg)]
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: adjust and enhance comments]
Signed-off-by: Davidlohr Bueso 
Reviewed-by: Rik van Riel 
Acked-by: Linus Torvalds 
Reviewed-by: Michel Lespinasse 
Cc: Oleg Nesterov 
Tested-by: Hugh Dickins 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

seq_file: remove "%n" usage from seq_file users

2013-11-15T00:32:20+00:00

All seq_printf() users are using "%n" for calculating padding size,
convert them to use seq_setwidth() / seq_pad() pair.

Signed-off-by: Tetsuo Handa 
Signed-off-by: Kees Cook 
Cc: Joe Perches 
Cc: David Miller 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm, thp: change pmd_trans_huge_lock() to return taken lock

2013-11-15T00:32:14+00:00

With split ptlock it's important to know which lock
pmd_trans_huge_lock() took.  This patch adds one more parameter to the
function to return the lock.

In most places migration to new api is trivial.  Exception is
move_huge_pmd(): we need to take two locks if pmd tables are different.

Signed-off-by: Naoya Horiguchi 
Signed-off-by: Kirill A. Shutemov 
Tested-by: Alex Thorlton 
Cc: Ingo Molnar 
Cc: "Eric W . Biederman" 
Cc: "Paul E . McKenney" 
Cc: Al Viro 
Cc: Andi Kleen 
Cc: Andrea Arcangeli 
Cc: Dave Hansen 
Cc: Dave Jones 
Cc: David Howells 
Cc: Frederic Weisbecker 
Cc: Johannes Weiner 
Cc: Kees Cook 
Cc: Mel Gorman 
Cc: Michael Kerrisk 
Cc: Oleg Nesterov 
Cc: Peter Zijlstra 
Cc: Rik van Riel 
Cc: Robin Holt 
Cc: Sedat Dilek 
Cc: Srikar Dronamraju 
Cc: Thomas Gleixner 
Cc: Hugh Dickins 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: convert mm->nr_ptes to atomic_long_t

2013-11-15T00:32:14+00:00

With split page table lock for PMD level we can't hold mm->page_table_lock
while updating nr_ptes.

Let's convert it to atomic_long_t to avoid races.

Signed-off-by: Kirill A. Shutemov 
Tested-by: Alex Thorlton 
Cc: Ingo Molnar 
Cc: Naoya Horiguchi 
Cc: "Eric W . Biederman" 
Cc: "Paul E . McKenney" 
Cc: Al Viro 
Cc: Andi Kleen 
Cc: Andrea Arcangeli 
Cc: Dave Hansen 
Cc: Dave Jones 
Cc: David Howells 
Cc: Frederic Weisbecker 
Cc: Johannes Weiner 
Cc: Kees Cook 
Cc: Mel Gorman 
Cc: Michael Kerrisk 
Cc: Oleg Nesterov 
Cc: Peter Zijlstra 
Cc: Rik van Riel 
Cc: Robin Holt 
Cc: Sedat Dilek 
Cc: Srikar Dronamraju 
Cc: Thomas Gleixner 
Cc: Hugh Dickins 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds