linux.git/fs/partitions, branch v2.6.20

[MIPS] Rename SNI_RM200_PCI to just SNI_RM preparing for more RM machines

2006-12-09T01:03:58+00:00

Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Ralf Baechle

[PATCH] fault-injection capability for disk IO

2006-12-08T16:29:02+00:00

This patch provides fault-injection capability for disk IO.

Boot option:

fail_make_request=,,,

	 -- specifies the interval of failures.

	 -- specifies how often it should fail in percent.

	 -- specifies the size of free space where disk IO can be issued
		   safely in bytes.

	 -- specifies how many times failures may happen at most.

Debugfs:

/debug/fail_make_request/interval
/debug/fail_make_request/probability
/debug/fail_make_request/specifies
/debug/fail_make_request/times

Example:

	fail_make_request=10,100,0,-1
	echo 1 > /sys/blocks/hda/hda1/make-it-fail

generic_make_request() on /dev/hda1 fails once per 10 times.

Cc: Jens Axboe 
Signed-off-by: Akinobu Mita 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] Fix check_partition routines

2006-12-07T16:39:30+00:00

check_partition() stops its probe once it hits an I/O error from the
partition checkers.  This would prevent the actual partition checker
getting a chance to verify the partition.

So this patch lets check_partition() continue probing untill it hits a
success while recording the I/O error which might have been reported by the
checking routines.

Also, it does some cleanup of the partition methods for ibm, atari and
amiga to return -1 upon hitting an I/O error.

Signed-off-by: Suzuki K P 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] fix rescan_partitions to return errors properly

2006-12-07T16:39:30+00:00

The current rescan_partition implementation ignores the errors that comes from
the lower layer.  It reports success for unknown partitions as well as I/O
error cases while reading the partition information.

The unknown partition is not (and will not be) considered as an error in the
kernel, since there are legal users of it (e.g, members of a RAID5 MD Device
or a new disk which is not partitioned at all ).  Changing this behaviour
would scare the user about a serious problem with their disk and is not
recommended.  Thus for both "unknown partitions" to the Linux (eg., DEC
VMS,Novell Netware) and the legal users of NULL partition, would still be
reported as "SUCCESS".

The patch attached here, scares the user about something which he does need to
worry about.  i.e, returning -EIO on disk I/O errors while reading the
partition information.

Signed-off-by: Suzuki K P 
Cc: Erik Mouw 
Cc: Christoph Hellwig 
Cc: Al Viro 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] Enable RAID autorun on Mac partition tables.

2006-12-04T16:36:37+00:00

Signed-off-by: David Woodhouse 
Signed-off-by: Linus Torvalds

[PATCH] fs/partitions/check: add sysfs error handling

2006-10-17T15:18:47+00:00

Handle errors thrown in disk_sysfs_symlinks(), and propagate back to
caller.

The callers and associated functions don't do a real good job of handling
kobject errors anyway (add_partition, register_disk, rescan_partitions), so
this should do until something better comes along.

Signed-off-by: Jeff Garzik 
Cc: Greg KH 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] fs/partitions endianness annotations

2006-10-10T23:15:34+00:00

Signed-off-by: Al Viro 
Signed-off-by: Linus Torvalds

[PATCH] fs/partitions: Conversion to generic boolean

2006-10-01T07:39:19+00:00

Conversion of booleans to: generic-boolean.patch (2006-08-23)

Signed-off-by: Richard Knutsson 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] BLOCK: Make it possible to disable the block layer [try #6]

2006-09-30T18:52:31+00:00

Make it possible to disable the block layer.  Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.

This patch does the following:

 (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
     support.

 (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
     an item that uses the block layer.  This includes:

     (*) Block I/O tracing.

     (*) Disk partition code.

     (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.

     (*) The SCSI layer.  As far as I can tell, even SCSI chardevs use the
     	 block layer to do scheduling.  Some drivers that use SCSI facilities -
     	 such as USB storage - end up disabled indirectly from this.

     (*) Various block-based device drivers, such as IDE and the old CDROM
     	 drivers.

     (*) MTD blockdev handling and FTL.

     (*) JFFS - which uses set_bdev_super(), something it could avoid doing by
     	 taking a leaf out of JFFS2's book.

 (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
     linux/elevator.h contingent on CONFIG_BLOCK being set.  sector_div() is,
     however, still used in places, and so is still available.

 (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
     parts of linux/fs.h.

 (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.

 (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.

 (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
     is not enabled.

 (*) fs/no-block.c is created to hold out-of-line stubs and things that are
     required when CONFIG_BLOCK is not set:

     (*) Default blockdev file operations (to give error ENODEV on opening).

 (*) Makes some /proc changes:

     (*) /proc/devices does not list any blockdevs.

     (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.

 (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.

 (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
     given command other than Q_SYNC or if a special device is specified.

 (*) In init/do_mounts.c, no reference is made to the blockdev routines if
     CONFIG_BLOCK is not defined.  This does not prohibit NFS roots or JFFS2.

 (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
     error ENOSYS by way of cond_syscall if so).

 (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
     CONFIG_BLOCK is not set, since they can't then happen.

Signed-Off-By: David Howells 
Signed-off-by: Jens Axboe

[PATCH] ignore partition table on disks with AIX label

2006-09-29T16:18:09+00:00

The on-disk data structures from AIX are not known, also the filesystem
layout is not known.  There is a msdos partition signature at the end of
the first block, and the kernel recognizes 3 small (and overlapping)
partitions.  But they are not usable.  Maybe the firmware uses it to find
the bootloader for AIX, but AIX boots also if the first block is cleared.

This is the content of the partition table:
 # dd if=/dev/sdb count=$(( 4 * 16 )) bs=1 skip=$(( 0x1be )) | xxd
0000000: 0000 0000 0000 0000 0000 0000 0000 0000  ................
0000010: 80ff ffff 41ff ffff 1b11 0000 381b 0000  ....A.......8...
0000020: 00ff ffff 41ff ffff 0211 0000 1900 0000  ....A...........
0000030: 80ff ffff 41ff ffff 1b11 0000 381b 0000  ....A.......8...

Handle the whole disk as empty disk.

This fixes also YaST which compares the output from parted (and formerly
fdisk) with /proc/partitions.  fdisk recognizes the AIX label since a long
time, SuSE has a patch for parted to handle the disk label as unknown.

dmesg will look like this:
 sda: [AIX]  unknown partition table

Tested on an IBM B50 with AIX V4.3.3.

Signed-off-by: Olaf Hering 
Cc: Albert Cahalan 
Cc: OGAWA Hirofumi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds