linux.git/fs/namespace.c, branch v4.12

fs: don't forget to put old mntns in mntns_install

2017-06-15T10:53:05+00:00

Fixes: 4f757f3cbf54 ("make sure that mntns_install() doesn't end up with referral for root")
Cc: Al Viro 
Signed-off-by: Andrei Vagin 
Signed-off-by: Al Viro

Merge branch 'work.sane_pwd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2017-05-12T18:39:59+00:00

Pull misc vfs updates from Al Viro:
 "Making sure that something like a referral point won't end up as pwd
  or root.

  The main part is the last commit (fixing mntns_install()); that one
  fixes a hard-to-hit race. The fchdir() commit is making fchdir(2) a
  bit more robust - it should be impossible to get opened files (even
  O_PATH ones) for referral points in the first place, so the existing
  checks are OK, but checking the same thing as in chdir(2) is just as
  cheap.

  The path_init() commit removes a redundant check that shouldn't have
  been there in the first place"

* 'work.sane_pwd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  make sure that mntns_install() doesn't end up with referral for root
  path_init(): don't bother with checking MAY_EXEC for LOOKUP_ROOT
  make sure that fchdir() won't accept referral points, etc.

make sure that mntns_install() doesn't end up with referral for root

2017-04-21T18:05:36+00:00

new flag: LOOKUP_DOWN.  If the starting point is overmounted, cross
into whatever's mounted on top, triggering referrals et.al.

Use that instead of follow_down_one() loop in mntns_install(), handle
errors properly.

Signed-off-by: Al Viro

fsnotify: Free fsnotify_mark_connector when there is no mark attached

2017-04-10T15:37:35+00:00

Currently we free fsnotify_mark_connector structure only when inode /
vfsmount is getting freed. This can however impose noticeable memory
overhead when marks get attached to inodes only temporarily. So free the
connector structure once the last mark is detached from the object.
Since notification infrastructure can be working with the connector
under the protection of fsnotify_mark_srcu, we have to be careful and
free the fsnotify_mark_connector only after SRCU period passes.

Reviewed-by: Miklos Szeredi 
Reviewed-by: Amir Goldstein 
Signed-off-by: Jan Kara

fsnotify: Move mark list head from object into dedicated structure

2017-04-10T15:37:34+00:00

Currently notification marks are attached to object (inode or vfsmnt) by
a hlist_head in the object. The list is also protected by a spinlock in
the object. So while there is any mark attached to the list of marks,
the object must be pinned in memory (and thus e.g. last iput() deleting
inode cannot happen). Also for list iteration in fsnotify() to work, we
must hold fsnotify_mark_srcu lock so that mark itself and
mark->obj_list.next cannot get freed. Thus we are required to wait for
response to fanotify events from userspace process with
fsnotify_mark_srcu lock held. That causes issues when userspace process
is buggy and does not reply to some event - basically the whole
notification subsystem gets eventually stuck.

So to be able to drop fsnotify_mark_srcu lock while waiting for
response, we have to pin the mark in memory and make sure it stays in
the object list (as removing the mark waiting for response could lead to
lost notification events for groups later in the list). However we don't
want inode reclaim to block on such mark as that would lead to system
just locking up elsewhere.

This commit is the first in the series that paves way towards solving
these conflicting lifetime needs. Instead of anchoring the list of marks
directly in the object, we anchor it in a dedicated structure
(fsnotify_mark_connector) and just point to that structure from the
object. The following commits will also add spinlock protecting the list
and object pointer to the structure.

Reviewed-by: Miklos Szeredi 
Reviewed-by: Amir Goldstein 
Signed-off-by: Jan Kara

sched/headers: Prepare to move 'init_task' and 'init_thread_union' from to

2017-03-02T07:42:38+00:00

Update all usage sites first.

Acked-by: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

sched/headers: Prepare to remove inclusion from

2017-03-02T07:42:31+00:00

Add #include  dependencies to all .c files rely on sched.h
doing that for them.

Note that even if the count where we need to add extra headers seems high,
it's still a net win, because  is included in over
2,200 files ...

Acked-by: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

mnt: Tuck mounts under others instead of creating shadow/side mounts.

2017-02-03T11:01:06+00:00

Ever since mount propagation was introduced in cases where a mount in
propagated to parent mount mountpoint pair that is already in use the
code has placed the new mount behind the old mount in the mount hash
table.

This implementation detail is problematic as it allows creating
arbitrary length mount hash chains.

Furthermore it invalidates the constraint maintained elsewhere in the
mount code that a parent mount and a mountpoint pair will have exactly
one mount upon them.  Making it hard to deal with and to talk about
this special case in the mount code.

Modify mount propagation to notice when there is already a mount at
the parent mount and mountpoint where a new mount is propagating to
and place that preexisting mount on top of the new mount.

Modify unmount propagation to notice when a mount that is being
unmounted has another mount on top of it (and no other children), and
to replace the unmounted mount with the mount on top of it.

Move the MNT_UMUONT test from __lookup_mnt_last into
__propagate_umount as that is the only call of __lookup_mnt_last where
MNT_UMOUNT may be set on any mount visible in the mount hash table.

These modifications allow:
 - __lookup_mnt_last to be removed.
 - attach_shadows to be renamed __attach_mnt and its shadow
   handling to be removed.
 - commit_tree to be simplified
 - copy_tree to be simplified

The result is an easier to understand tree of mounts that does not
allow creation of arbitrary length hash chains in the mount hash table.

The result is also a very slight userspace visible difference in semantics.
The following two cases now behave identically, where before order
mattered:

case 1: (explicit user action)
	B is a slave of A
	mount something on A/a , it will propagate to B/a
	and than mount something on B/a

case 2: (tucked mount)
	B is a slave of A
	mount something on B/a
	and than mount something on A/a

Histroically umount A/a would fail in case 1 and succeed in case 2.
Now umount A/a succeeds in both configurations.

This very small change in semantics appears if anything to be a bug
fix to me and my survey of userspace leads me to believe that no programs
will notice or care of this subtle semantic change.

v2: Updated to mnt_change_mountpoint to not call dput or mntput
and instead to decrement the counts directly.  It is guaranteed
that there will be other references when mnt_change_mountpoint is
called so this is safe.

v3: Moved put_mountpoint under mount_lock in attach_recursive_mnt
    As the locking in fs/namespace.c changed between v2 and v3.

v4: Reworked the logic in propagate_mount_busy and __propagate_umount
    that detects when a mount completely covers another mount.

v5: Removed unnecessary tests whose result is alwasy true in
    find_topper and attach_recursive_mnt.

v6: Document the user space visible semantic difference.

Cc: stable@vger.kernel.org
Fixes: b90fa9ae8f51 ("[PATCH] shared mount handling: bind and rbind")
Tested-by: Andrei Vagin 
Signed-off-by: "Eric W. Biederman"

fs: Better permission checking for submounts

2017-02-01T15:36:12+00:00

To support unprivileged users mounting filesystems two permission
checks have to be performed: a test to see if the user allowed to
create a mount in the mount namespace, and a test to see if
the user is allowed to access the specified filesystem.

The automount case is special in that mounting the original filesystem
grants permission to mount the sub-filesystems, to any user who
happens to stumble across the their mountpoint and satisfies the
ordinary filesystem permission checks.

Attempting to handle the automount case by using override_creds
almost works.  It preserves the idea that permission to mount
the original filesystem is permission to mount the sub-filesystem.
Unfortunately using override_creds messes up the filesystems
ordinary permission checks.

Solve this by being explicit that a mount is a submount by introducing
vfs_submount, and using it where appropriate.

vfs_submount uses a new mount internal mount flags MS_SUBMOUNT, to let
sget and friends know that a mount is a submount so they can take appropriate
action.

sget and sget_userns are modified to not perform any permission checks
on submounts.

follow_automount is modified to stop using override_creds as that
has proven problemantic.

do_mount is modified to always remove the new MS_SUBMOUNT flag so
that we know userspace will never by able to specify it.

autofs4 is modified to stop using current_real_cred that was put in
there to handle the previous version of submount permission checking.

cifs is modified to pass the mountpoint all of the way down to vfs_submount.

debugfs is modified to pass the mountpoint all of the way down to
trace_automount by adding a new parameter.  To make this change easier
a new typedef debugfs_automount_t is introduced to capture the type of
the debugfs automount function.

Cc: stable@vger.kernel.org
Fixes: 069d5ac9ae0d ("autofs:  Fix automounts by using current_real_cred()->uid")
Fixes: aeaa4a79ff6a ("fs: Call d_automount with the filesystems creds")
Reviewed-by: Trond Myklebust 
Reviewed-by: Seth Forshee 
Signed-off-by: "Eric W. Biederman"

mnt: Protect the mountpoint hashtable with mount_lock

2017-01-10T00:34:43+00:00

Protecting the mountpoint hashtable with namespace_sem was sufficient
until a call to umount_mnt was added to mntput_no_expire.  At which
point it became possible for multiple calls of put_mountpoint on
the same hash chain to happen on the same time.

Kristen Johansen  reported:
> This can cause a panic when simultaneous callers of put_mountpoint
> attempt to free the same mountpoint.  This occurs because some callers
> hold the mount_hash_lock, while others hold the namespace lock.  Some
> even hold both.
>
> In this submitter's case, the panic manifested itself as a GP fault in
> put_mountpoint() when it called hlist_del() and attempted to dereference
> a m_hash.pprev that had been poisioned by another thread.

Al Viro observed that the simple fix is to switch from using the namespace_sem
to the mount_lock to protect the mountpoint hash table.

I have taken Al's suggested patch moved put_mountpoint in pivot_root
(instead of taking mount_lock an additional time), and have replaced
new_mountpoint with get_mountpoint a function that does the hash table
lookup and addition under the mount_lock.   The introduction of get_mounptoint
ensures that only the mount_lock is needed to manipulate the mountpoint
hashtable.

d_set_mounted is modified to only set DCACHE_MOUNTED if it is not
already set.  This allows get_mountpoint to use the setting of
DCACHE_MOUNTED to ensure adding a struct mountpoint for a dentry
happens exactly once.

Cc: stable@vger.kernel.org
Fixes: ce07d891a089 ("mnt: Honor MNT_LOCKED when detaching mounts")
Reported-by: Krister Johansen 
Suggested-by: Al Viro 
Acked-by: Al Viro 
Signed-off-by: "Eric W. Biederman"