Making anonymous inodes regular files comes with a lot of risk and
regression potential as evidenced by a recent hickup in io_uring. We're
better of continuing to not have them be regular files. Since we have
S_ANON_INODE we can port all of our assertions easily.

Link: https://lore.kernel.org/20250702-work-fixes-v1-1-ff76ea589e33@kernel.org
Fixes: cfd86ef7e8e7 ("anon_inode: use a proper mode internally")
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: stable@kernel.org
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Pull vfs freezing updates from Christian Brauner:
 "This contains various filesystem freezing related work for this cycle:

   - Allow the power subsystem to support filesystem freeze for suspend
     and hibernate.

     Now all the pieces are in place to actually allow the power
     subsystem to freeze/thaw filesystems during suspend/resume.
     Filesystems are only frozen and thawed if the power subsystem does
     actually own the freeze.

     If the filesystem is already frozen by the time we've frozen all
     userspace processes we don't care to freeze it again. That's
     userspace's job once the process resumes. We only actually freeze
     filesystems if we absolutely have to and we ignore other failures
     to freeze.

     We could bubble up errors and fail suspend/resume if the error
     isn't EBUSY (aka it's already frozen) but I don't think that this
     is worth it. Filesystem freezing during suspend/resume is
     best-effort. If the user has 500 ext4 filesystems mounted and 4
     fail to freeze for whatever reason then we simply skip them.

     What we have now is already a big improvement and let's see how we
     fare with it before making our lives even harder (and uglier) than
     we have to.

   - Allow efivars to support freeze and thaw

     Allow efivarfs to partake to resync variable state during system
     hibernation and suspend. Add freeze/thaw support.

     This is a pretty straightforward implementation. We simply add
     regular freeze/thaw support for both userspace and the kernel.
     efivars is the first pseudofilesystem that adds support for
     filesystem freezing and thawing.

     The simplicity comes from the fact that we simply always resync
     variable state after efivarfs has been frozen. It doesn't matter
     whether that's because of suspend, userspace initiated freeze or
     hibernation. Efivars is simple enough that it doesn't matter that
     we walk all dentries. There are no directories and there aren't
     insane amounts of entries and both freeze/thaw are already
     heavy-handed operations. If userspace initiated a freeze/thaw cycle
     they would need CAP_SYS_ADMIN in the initial user namespace (as
     that's where efivarfs is mounted) so it can't be triggered by
     random userspace. IOW, we really really don't care"

* tag 'vfs-6.16-rc1.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  f2fs: fix freezing filesystem during resize
  kernfs: add warning about implementing freeze/thaw
  efivarfs: support freeze/thaw
  power: freeze filesystems during suspend/resume
  libfs: export find_next_child()
  super: add filesystem freezing helpers for suspend and hibernate
  gfs2: pass through holder from the VFS for freeze/thaw
  super: use common iterator (Part 2)
  super: use a common iterator (Part 1)
  super: skip dying superblocks early
  super: simplify user_get_super()
  super: remove pointless s_root checks
  fs: allow all writers to be frozen
  locking/percpu-rwsem: add freezable alternative to down_read

Export find_next_child() so it can be used by efivarfs.
Keep it internal for now. There's no reason to advertise this
kernel-wide.

Link: https://lore.kernel.org/r/20250331-work-freeze-v1-1-6dfbe8253b9f@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>

This makes it easy to detect proper anonymous inodes and to ensure that
we can detect them in codepaths such as readahead().

Readahead on anonymous inodes didn't work because they didn't have a
proper mode. Now that they have we need to retain EINVAL being returned
otherwise LTP will fail.

We also need to ensure that ioctls aren't simply fired like they are for
regular files so things like inotify inodes continue to correctly call
their own ioctl handlers as in [1].

Reported-by: Xilin Wu <sophon@radxa.com>
Link: https://lore.kernel.org/3A9139D5CD543962+89831381-31b9-4392-87ec-a84a5b3507d8@radxa.com [1]
Link: https://lore.kernel.org/7a1a7076-ff6b-4cb0-94e7-7218a0a44028@sirena.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>

This allows the VFS to not trip over anonymous inodes and we can add
asserts based on the mode into the vfs. When we report it to userspace
we can simply hide the mode to avoid regressions. I've audited all
direct callers of alloc_anon_inode() and only secretmen overrides i_mode
and i_op inode operations but it already uses a regular file.

Link: https://lore.kernel.org/20250407-work-anon_inode-v1-1-53a44c20d44e@kernel.org
Fixes: af153bb63a336 ("vfs: catch invalid modes in may_open()")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@vger.kernel.org # all LTS kernels
Reported-by: syzbot+5d8e79d323a13aa0b248@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67ed3fb3.050a0220.14623d.0009.GAE@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>

Pull vfs pidfs updates from Christian Brauner:

 - Allow retrieving exit information after a process has been reaped
   through pidfds via the new PIDFD_INTO_EXIT extension for the
   PIDFD_GET_INFO ioctl. Various tools need access to information about
   a process/task even after it has already been reaped.

   Pidfd polling allows waiting on either task exit or for a task to
   have been reaped. The contract for PIDFD_INFO_EXIT is simply that
   EPOLLHUP must be observed before exit information can be retrieved,
   i.e., exit information is only provided once the task has been reaped
   and then can be retrieved as long as the pidfd is open.

 - Add PIDFD_SELF_{THREAD,THREAD_GROUP} sentinels allowing userspace to
   forgo allocating a file descriptor for their own process. This is
   useful in scenarios where users want to act on their own process
   through pidfds and is akin to AT_FDCWD.

 - Improve premature thread-group leader and subthread exec behavior
   when polling on pidfds:

   (1) During a multi-threaded exec by a subthread, i.e.,
       non-thread-group leader thread, all other threads in the
       thread-group including the thread-group leader are killed and the
       struct pid of the thread-group leader will be taken over by the
       subthread that called exec. IOW, two tasks change their TIDs.

   (2) A premature thread-group leader exit means that the thread-group
       leader exited before all of the other subthreads in the
       thread-group have exited.

   Both cases lead to inconsistencies for pidfd polling with
   PIDFD_THREAD. Any caller that holds a PIDFD_THREAD pidfd to the
   current thread-group leader may or may not see an exit notification
   on the file descriptor depending on when poll is performed. If the
   poll is performed before the exec of the subthread has concluded an
   exit notification is generated for the old thread-group leader. If
   the poll is performed after the exec of the subthread has concluded
   no exit notification is generated for the old thread-group leader.

   The correct behavior is to simply not generate an exit notification
   on the struct pid of a subhthread exec because the struct pid is
   taken over by the subthread and thus remains alive.

   But this is difficult to handle because a thread-group may exit
   premature as mentioned in (2). In that case an exit notification is
   reliably generated but the subthreads may continue to run for an
   indeterminate amount of time and thus also may exec at some point.

   After this pull no exit notifications will be generated for a
   PIDFD_THREAD pidfd for a thread-group leader until all subthreads
   have been reaped. If a subthread should exec before no exit
   notification will be generated until that task exits or it creates
   subthreads and repeates the cycle.

   This means an exit notification indicates the ability for the father
   to reap the child.

* tag 'vfs-6.15-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (25 commits)
  selftests/pidfd: third test for multi-threaded exec polling
  selftests/pidfd: second test for multi-threaded exec polling
  selftests/pidfd: first test for multi-threaded exec polling
  pidfs: improve multi-threaded exec and premature thread-group leader exit polling
  pidfs: ensure that PIDFS_INFO_EXIT is available
  selftests/pidfd: add seventh PIDFD_INFO_EXIT selftest
  selftests/pidfd: add sixth PIDFD_INFO_EXIT selftest
  selftests/pidfd: add fifth PIDFD_INFO_EXIT selftest
  selftests/pidfd: add fourth PIDFD_INFO_EXIT selftest
  selftests/pidfd: add third PIDFD_INFO_EXIT selftest
  selftests/pidfd: add second PIDFD_INFO_EXIT selftest
  selftests/pidfd: add first PIDFD_INFO_EXIT selftest
  selftests/pidfd: expand common pidfd header
  pidfs/selftests: ensure correct headers for ioctl handling
  selftests/pidfd: fix header inclusion
  pidfs: allow to retrieve exit information
  pidfs: record exit code and cgroupid at exit
  pidfs: use private inode slab cache
  pidfs: move setting flags into pidfs_alloc_file()
  pidfd: rely on automatic cleanup in __pidfd_prepare()
  ...

There is an issue in the kernel:

In tmpfs, when using the "ls" command to list the contents
of a directory with a large number of files, glibc performs
the getdents call in multiple rounds. If a concurrent unlink
occurs between these getdents calls, it may lead to duplicate
directory entries in the ls output. One possible reproduction
scenario is as follows:

Create 1026 files and execute ls and rm concurrently:

for i in {1..1026}; do
    echo "This is file $i" > /tmp/dir/file$i
done

ls /tmp/dir				rm /tmp/dir/file4
	->getdents(file1026-file5)
						->unlink(file4)

	->getdents(file5,file3,file2,file1)

It is expected that the second getdents call to return file3
through file1, but instead it returns an extra file5.

The root cause of this problem is in the offset_dir_lookup
function. It uses mas_find to determine the starting position
for the current getdents call. Since mas_find locates the first
position that is greater than or equal to mas->index, when file4
is deleted, it ends up returning file5.

It can be fixed by replacing mas_find with mas_find_rev, which
finds the first position that is less than or equal to mas->index.

Fixes: b9b588f22a0c ("libfs: Use d_children list to iterate simple_offset directories")
Signed-off-by: Yongjian Sun <sunyongjian1@huawei.com>
Link: https://lore.kernel.org/r/20250320034417.555810-1-sunyongjian@huaweicloud.com
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Record the exit code and cgroupid in release_task() and stash in struct
pidfs_exit_info so it can be retrieved even after the task has been
reaped.

Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-5-c8c3d8361705@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Pull vfs d_revalidate updates from Al Viro:
 "Provide stable parent and name to ->d_revalidate() instances

  Most of the filesystem methods where we care about dentry name and
  parent have their stability guaranteed by the callers;
  ->d_revalidate() is the major exception.

  It's easy enough for callers to supply stable values for expected name
  and expected parent of the dentry being validated. That kills quite a
  bit of boilerplate in ->d_revalidate() instances, along with a bunch
  of races where they used to access ->d_name without sufficient
  precautions"

* tag 'pull-revalidate' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  9p: fix ->rename_sem exclusion
  orangefs_d_revalidate(): use stable parent inode and name passed by caller
  ocfs2_dentry_revalidate(): use stable parent inode and name passed by caller
  nfs: fix ->d_revalidate() UAF on ->d_name accesses
  nfs{,4}_lookup_validate(): use stable parent inode passed by caller
  gfs2_drevalidate(): use stable parent inode and name passed by caller
  fuse_dentry_revalidate(): use stable parent inode and name passed by caller
  vfat_revalidate{,_ci}(): use stable parent inode passed by caller
  exfat_d_revalidate(): use stable parent inode passed by caller
  fscrypt_d_revalidate(): use stable parent inode passed by caller
  ceph_d_revalidate(): propagate stable name down into request encoding
  ceph_d_revalidate(): use stable parent inode passed by caller
  afs_d_revalidate(): use stable name and parent inode passed by caller
  Pass parent directory inode and expected name to ->d_revalidate()
  generic_ci_d_compare(): use shortname_storage
  ext4 fast_commit: make use of name_snapshot primitives
  dissolve external_name.u into separate members
  make take_dentry_name_snapshot() lockless
  dcache: back inline names with a struct-wrapped array of unsigned long
  make sure that DNAME_INLINE_LEN is a multiple of word size

... and check the "name might be unstable" predicate
the right way.

Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>