Pull jfs updates from Dave Kleikamp:
 "A few small fixes"

* tag 'jfs-6.6' of github.com:kleikamp/linux-shaggy:
  jfs: validate max amount of blocks before allocation.
  jfs: remove redundant initialization to pointer ip
  jfs: fix invalid free of JFS_IP(ipimap)->i_imap in diUnmount
  FS: JFS: (trivial) Fix grammatical error in extAlloc
  fs/jfs: prevent double-free in dbUnmount() after failed jfs_remount()

Pull smb client updates from Steve French:

 - fixes for excessive stack usage

 - multichannel reconnect improvements

 - DFS fix and cleanup patches

 - move UCS-2 conversion code to fs/nls and update cifs and jfs to use
   them

 - cleanup patch for compounding, one to fix confusing function name

 - inode number collision fix

 - reparse point fixes (including avoiding an extra unneeded query on
   symlinks) and a minor cleanup

 - directory lease (caching) improvement

* tag '6.6-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (24 commits)
  fs/jfs: Use common ucs2 upper case table
  fs/smb/client: Use common code in client
  fs/smb: Swing unicode common code from smb->NLS
  fs/smb: Remove unicode 'lower' tables
  SMB3: rename macro CIFS_SERVER_IS_CHAN to avoid confusion
  [SMB3] send channel sequence number in SMB3 requests after reconnects
  cifs: update desired access while requesting for directory lease
  smb: client: reduce stack usage in smb2_query_reparse_point()
  smb: client: reduce stack usage in smb2_query_info_compound()
  smb: client: reduce stack usage in smb2_set_ea()
  smb: client: reduce stack usage in smb_send_rqst()
  smb: client: reduce stack usage in cifs_demultiplex_thread()
  smb: client: reduce stack usage in cifs_try_adding_channels()
  smb: cilent: set reparse mount points as automounts
  smb: client: query reparse points in older dialects
  smb: client: do not query reparse points twice on symlinks
  smb: client: parse reparse point flag in create response
  smb: client: get rid of dfs code dep in namespace.c
  smb: client: get rid of dfs naming in automount code
  smb: client: rename cifs_dfs_ref.c to namespace.c
  ...

Use the UCS-2 upper case tables from nls, that are shared
with smb.

This code in JFS is hard to test, so we're only reusing the
same tables (which are identical), not trying to reuse the
rest of the helper functions.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull block updates from Jens Axboe:
 "Pretty quiet round for this release. This contains:

   - Add support for zoned storage to ublk (Andreas, Ming)

   - Series improving performance for drivers that mark themselves as
     needing a blocking context for issue (Bart)

   - Cleanup the flush logic (Chengming)

   - sed opal keyring support (Greg)

   - Fixes and improvements to the integrity support (Jinyoung)

   - Add some exports for bcachefs that we can hopefully delete again in
     the future (Kent)

   - deadline throttling fix (Zhiguo)

   - Series allowing building the kernel without buffer_head support
     (Christoph)

   - Sanitize the bio page adding flow (Christoph)

   - Write back cache fixes (Christoph)

   - MD updates via Song:
      - Fix perf regression for raid0 large sequential writes (Jan)
      - Fix split bio iostat for raid0 (David)
      - Various raid1 fixes (Heinz, Xueshi)
      - raid6test build fixes (WANG)
      - Deprecate bitmap file support (Christoph)
      - Fix deadlock with md sync thread (Yu)
      - Refactor md io accounting (Yu)
      - Various non-urgent fixes (Li, Yu, Jack)

   - Various fixes and cleanups (Arnd, Azeem, Chengming, Damien, Li,
     Ming, Nitesh, Ruan, Tejun, Thomas, Xu)"

* tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux: (113 commits)
  block: use strscpy() to instead of strncpy()
  block: sed-opal: keyring support for SED keys
  block: sed-opal: Implement IOC_OPAL_REVERT_LSP
  block: sed-opal: Implement IOC_OPAL_DISCOVERY
  blk-mq: prealloc tags when increase tagset nr_hw_queues
  blk-mq: delete redundant tagset map update when fallback
  blk-mq: fix tags leak when shrink nr_hw_queues
  ublk: zoned: support REQ_OP_ZONE_RESET_ALL
  md: raid0: account for split bio in iostat accounting
  md/raid0: Fix performance regression for large sequential writes
  md/raid0: Factor out helper for mapping and submitting a bio
  md raid1: allow writebehind to work on any leg device set WriteMostly
  md/raid1: hold the barrier until handle_read_error() finishes
  md/raid1: free the r1bio before waiting for blocked rdev
  md/raid1: call free_r1bio() before allow_barrier() in raid_end_bio_io()
  blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init
  drivers/rnbd: restore sysfs interface to rnbd-client
  md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid()
  raid6: test: only check for Altivec if building on powerpc hosts
  raid6: test: make sure all intermediate and artifact files are .gitignored
  ...

The lack of checking bmp->db_max_freebud in extBalloc() can lead to
shift out of bounds, so this patch prevents undefined behavior, because
bmp->db_max_freebud == -1 only if there is no free space.

Signed-off-by: Aleksei Filippov <halip0503@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+5f088f29593e6b4c8db8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?id=01abadbd6ae6a08b1f1987aa61554c6b3ac19ff2

The pointer ip is being initialized with a value that is never read, it
is being re-assigned later on. The assignment is redundant and can be
removed.  Cleans up clang scan warning:

fs/jfs/namei.c:886:16: warning: Value stored to 'ip' during its
initialization is never read [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>

Pull vfs timestamp updates from Christian Brauner:
 "This adds VFS support for multi-grain timestamps and converts tmpfs,
  xfs, ext4, and btrfs to use them. This carries acks from all relevant
  filesystems.

  The VFS always uses coarse-grained timestamps when updating the ctime
  and mtime after a change. This has the benefit of allowing filesystems
  to optimize away a lot of metadata updates, down to around 1 per
  jiffy, even when a file is under heavy writes.

  Unfortunately, this has always been an issue when we're exporting via
  NFSv3, which relies on timestamps to validate caches. A lot of changes
  can happen in a jiffy, so timestamps aren't sufficient to help the
  client decide to invalidate the cache.

  Even with NFSv4, a lot of exported filesystems don't properly support
  a change attribute and are subject to the same problems with timestamp
  granularity. Other applications have similar issues with timestamps
  (e.g., backup applications).

  If we were to always use fine-grained timestamps, that would improve
  the situation, but that becomes rather expensive, as the underlying
  filesystem would have to log a lot more metadata updates.

  This introduces fine-grained timestamps that are used when they are
  actively queried.

  This uses the 31st bit of the ctime tv_nsec field to indicate that
  something has queried the inode for the mtime or ctime. When this flag
  is set, on the next mtime or ctime update, the kernel will fetch a
  fine-grained timestamp instead of the usual coarse-grained one.

  As POSIX generally mandates that when the mtime changes, the ctime
  must also change the kernel always stores normalized ctime values, so
  only the first 30 bits of the tv_nsec field are ever used.

  Filesytems can opt into this behavior by setting the FS_MGTIME flag in
  the fstype. Filesystems that don't set this flag will continue to use
  coarse-grained timestamps.

  Various preparatory changes, fixes and cleanups are included:

   - Fixup all relevant places where POSIX requires updating ctime
     together with mtime. This is a wide-range of places and all
     maintainers provided necessary Acks.

   - Add new accessors for inode->i_ctime directly and change all
     callers to rely on them. Plain accesses to inode->i_ctime are now
     gone and it is accordingly rename to inode->__i_ctime and commented
     as requiring accessors.

   - Extend generic_fillattr() to pass in a request mask mirroring in a
     sense the statx() uapi. This allows callers to pass in a request
     mask to only get a subset of attributes filled in.

   - Rework timestamp updates so it's possible to drop the @now
     parameter the update_time() inode operation and associated helpers.

   - Add inode_update_timestamps() and convert all filesystems to it
     removing a bunch of open-coding"

* tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits)
  btrfs: convert to multigrain timestamps
  ext4: switch to multigrain timestamps
  xfs: switch to multigrain timestamps
  tmpfs: add support for multigrain timestamps
  fs: add infrastructure for multigrain timestamps
  fs: drop the timespec64 argument from update_time
  xfs: have xfs_vn_update_time gets its own timestamp
  fat: make fat_update_time get its own timestamp
  fat: remove i_version handling from fat_update_time
  ubifs: have ubifs_update_time use inode_update_timestamps
  btrfs: have it use inode_update_timestamps
  fs: drop the timespec64 arg from generic_update_time
  fs: pass the request_mask to generic_fillattr
  fs: remove silly warning from current_time
  gfs2: fix timestamp handling on quota inodes
  fs: rename i_ctime field to __i_ctime
  selinux: convert to ctime accessor functions
  security: convert to ctime accessor functions
  apparmor: convert to ctime accessor functions
  sunrpc: convert to ctime accessor functions
  ...

All users now just use '->iterate_shared()', which only takes the
directory inode lock for reading.

Filesystems that never got convered to shared mode now instead use a
wrapper that drops the lock, re-takes it in write mode, calls the old
function, and then downgrades the lock back to read mode.

This way the VFS layer and other callers no longer need to care about
filesystems that never got converted to the modern era.

The filesystems that use the new wrapper are ceph, coda, exfat, jfs,
ntfs, ocfs2, overlayfs, and vboxsf.

Honestly, several of them look like they really could just iterate their
directories in shared mode and skip the wrapper entirely, but the point
of this change is to not change semantics or fix filesystems that
haven't been fixed in the last 7+ years, but to finally get rid of the
dual iterators.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Add a new config option that controls building the buffer_head code, and
select it from all file systems and stacking drivers that need it.

For the block device nodes and alternative iomap based buffered I/O path
is provided when buffer_head support is not enabled, and iomap needs a
a small tweak to define the IOMAP_F_BUFFER_HEAD flag to 0 to not call
into the buffer_head code when it doesn't exist.

Otherwise this is just Kconfig and ifdef changes.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230801172201.1923299-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.

Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-53-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>