In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-52-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Pull splice updates from Jens Axboe:
 "This kills off ITER_PIPE to avoid a race between truncate,
  iov_iter_revert() on the pipe and an as-yet incomplete DMA to a bio
  with unpinned/unref'ed pages from an O_DIRECT splice read. This causes
  memory corruption.

  Instead, we either use (a) filemap_splice_read(), which invokes the
  buffered file reading code and splices from the pagecache into the
  pipe; (b) copy_splice_read(), which bulk-allocates a buffer, reads
  into it and then pushes the filled pages into the pipe; or (c) handle
  it in filesystem-specific code.

  Summary:

   - Rename direct_splice_read() to copy_splice_read()

   - Simplify the calculations for the number of pages to be reclaimed
     in copy_splice_read()

   - Turn do_splice_to() into a helper, vfs_splice_read(), so that it
     can be used by overlayfs and coda to perform the checks on the
     lower fs

   - Make vfs_splice_read() jump to copy_splice_read() to handle
     direct-I/O and DAX

   - Provide shmem with its own splice_read to handle non-existent pages
     in the pagecache. We don't want a ->read_folio() as we don't want
     to populate holes, but filemap_get_pages() requires it

   - Provide overlayfs with its own splice_read to call down to a lower
     layer as overlayfs doesn't provide ->read_folio()

   - Provide coda with its own splice_read to call down to a lower layer
     as coda doesn't provide ->read_folio()

   - Direct ->splice_read to copy_splice_read() in tty, procfs, kernfs
     and random files as they just copy to the output buffer and don't
     splice pages

   - Provide wrappers for afs, ceph, ecryptfs, ext4, f2fs, nfs, ntfs3,
     ocfs2, orangefs, xfs and zonefs to do locking and/or revalidation

   - Make cifs use filemap_splice_read()

   - Replace pointers to generic_file_splice_read() with pointers to
     filemap_splice_read() as DIO and DAX are handled in the caller;
     filesystems can still provide their own alternate ->splice_read()
     op

   - Remove generic_file_splice_read()

   - Remove ITER_PIPE and its paraphernalia as generic_file_splice_read
     was the only user"

* tag 'for-6.5/splice-2023-06-23' of git://git.kernel.dk/linux: (31 commits)
  splice: kdoc for filemap_splice_read() and copy_splice_read()
  iov_iter: Kill ITER_PIPE
  splice: Remove generic_file_splice_read()
  splice: Use filemap_splice_read() instead of generic_file_splice_read()
  cifs: Use filemap_splice_read()
  trace: Convert trace/seq to use copy_splice_read()
  zonefs: Provide a splice-read wrapper
  xfs: Provide a splice-read wrapper
  orangefs: Provide a splice-read wrapper
  ocfs2: Provide a splice-read wrapper
  ntfs3: Provide a splice-read wrapper
  nfs: Provide a splice-read wrapper
  f2fs: Provide a splice-read wrapper
  ext4: Provide a splice-read wrapper
  ecryptfs: Provide a splice-read wrapper
  ceph: Provide a splice-read wrapper
  afs: Provide a splice-read wrapper
  9p: Add splice_read wrapper
  net: Make sock_splice_read() use copy_splice_read() by default
  tty, proc, kernfs, random: Use copy_splice_read()
  ...

Replace pointers to generic_file_splice_read() with calls to
filemap_splice_read().

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-29-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Use kcalloc() for allocation/flush of 128 pointers table to
reduce stack usage.

Function now returns -ENOMEM or 0 on success.

stackusage
Before:
./fs/jffs2/xattr.c:775  jffs2_build_xattr_subsystem     1208
dynamic,bounded

After:
./fs/jffs2/xattr.c:775  jffs2_build_xattr_subsystem     192
dynamic,bounded

Also update definition when CONFIG_JFFS2_FS_XATTR is not enabled

Tested with an MTD mount point and some user set/getfattr.

Many current target on OpenWRT also suffer from a compilation warning
(that become an error with CONFIG_WERROR) with the following output:

fs/jffs2/xattr.c: In function 'jffs2_build_xattr_subsystem':
fs/jffs2/xattr.c:887:1: error: the frame size of 1088 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
  887 | }
      | ^

Using dynamic allocation fix this compilation warning.

Fixes: c9f700f840bd ("[JFFS2][XATTR] using 'delete marker' for xdatum/xref deletion")
Reported-by: Tim Gardner <tim.gardner@canonical.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Ron Economos <re@w6rz.net>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Message-Id: <20230506045612.16616-1-ansuelsmth@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Reflect in their naming and document that they are kept around for
legacy reasons and shouldn't be used anymore by new code.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

The ext{2,4}, erofs, f2fs, and jffs2 filesystems use the same logic to
check whether a given xattr can be listed. Simplify them and avoid
open-coding the same check by calling the helper we introduced earlier.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: linux-erofs@lists.ozlabs.org
Cc: linux-ext4@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

Remove struct posix_acl_{access,default}_handler for all filesystems
that don't depend on the xattr handler in their inode->i_op->listxattr()
method in any way. There's nothing more to do than to simply remove the
handler. It's been effectively unused ever since we introduced the new
posix acl api.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

Pull jffs2, ubi and ubifs updates from Richard Weinberger:
 "JFFS2:
   - Fix memory corruption in error path
   - Spelling and coding style fixes

  UBI:
   - Switch to BLK_MQ_F_BLOCKING in ubiblock
   - Wire up partent device (for sysfs)
   - Multiple UAF bugfixes
   - Fix for an infinite loop in WL error path

  UBIFS:
   - Fix for multiple memory leaks in error paths
   - Fixes for wrong space accounting
   - Minor cleanups
   - Spelling and coding style fixes"

* tag 'ubifs-for-linus-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: (36 commits)
  ubi: block: Fix a possible use-after-free bug in ubiblock_create()
  ubifs: make kobj_type structures constant
  mtd: ubi: block: wire-up device parent
  mtd: ubi: wire-up parent MTD device
  ubi: use correct names in function kernel-doc comments
  ubi: block: set BLK_MQ_F_BLOCKING
  jffs2: Fix list_del corruption if compressors initialized failed
  jffs2: Use function instead of macro when initialize compressors
  jffs2: fix spelling mistake "neccecary"->"necessary"
  ubifs: Fix kernel-doc
  ubifs: Fix some kernel-doc comments
  UBI: Fastmap: Fix kernel-doc
  ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed
  ubi: Fix UAF wear-leveling entry in eraseblk_count_seq_show()
  ubi: fastmap: Fix missed fm_anchor PEB in wear-leveling after disabling fastmap
  ubifs: ubifs_releasepage: Remove ubifs_assert(0) to valid this process
  ubifs: ubifs_writepage: Mark page dirty after writing inode failed
  ubifs: dirty_cow_znode: Fix memleak in error handling path
  ubifs: Re-statistic cleaned znode count if commit failed
  ubi: Fix permission display of the debugfs files
  ...

There is a list_del corruption when remove the jffs2 module:

  list_del corruption, ffffffffa0623e60->next is NULL
  WARNING: CPU: 6 PID: 6332 at lib/list_debug.c:49 __list_del_entry_valid+0x98/0x130
  Modules linked in: jffs2(-) ]
  CPU: 6 PID: 6332 Comm: rmmod Tainted: G        W          6.1.0-rc2+ #5
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
  RIP: 0010:__list_del_entry_valid+0x98/0x130
  ...
  Call Trace:
   <TASK>
   jffs2_unregister_compressor+0x3e/0xe0 [jffs2]
   jffs2_zlib_exit+0x11/0x30 [jffs2]
   jffs2_compressors_exit+0x1e/0x30 [jffs2]
   exit_jffs2_fs+0x16/0x44f [jffs2]
   __do_sys_delete_module.constprop.0+0x244/0x370
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0

If one of the compressor initialize failed, the module always insert
success since jffs2_compressors_init() always return success, then
something bad may happen during remove the module.

For this scenario, let's insmod failed.

Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

The initialized compressors should be released if one of them
initialize fail, this is the pre-patch for fix the problem, use
function instead of the macro in jffs2_compressors_init() to
simplify the codes, no functional change intended.

Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>