Pull jffs2 updates from Richard Weinberger: - Fix illegal memory access in jffs2_free_inode() - Kernel-doc fixes - print symbolic error names * tag 'jffs2-for-linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: jffs2: Fix potential illegal address access in jffs2_free_inode jffs2: Simplify the allocation of slab caches jffs2: nodemgmt: fix kernel-doc comments jffs2: print symbolic error name instead of error code
During the stress testing of the jffs2 file system,the following abnormal printouts were found: [ 2430.649000] Unable to handle kernel paging request at virtual address 0069696969696948 [ 2430.649622] Mem abort info: [ 2430.649829] ESR = 0x96000004 [ 2430.650115] EC = 0x25: DABT (current EL), IL = 32 bits [ 2430.650564] SET = 0, FnV = 0 [ 2430.650795] EA = 0, S1PTW = 0 [ 2430.651032] FSC = 0x04: level 0 translation fault [ 2430.651446] Data abort info: [ 2430.651683] ISV = 0, ISS = 0x00000004 [ 2430.652001] CM = 0, WnR = 0 [ 2430.652558] [0069696969696948] address between user and kernel address ranges [ 2430.653265] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 2430.654512] CPU: 2 PID: 20919 Comm: cat Not tainted 5.15.25-g512f31242bf6 #33 [ 2430.655008] Hardware name: linux,dummy-virt (DT) [ 2430.655517] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2430.656142] pc : kfree+0x78/0x348 [ 2430.656630] lr : jffs2_free_inode+0x24/0x48 [ 2430.657051] sp : ffff800009eebd10 [ 2430.657355] x29: ffff800009eebd10 x28: 0000000000000001 x27: 0000000000000000 [ 2430.658327] x26: ffff000038f09d80 x25: 0080000000000000 x24: ffff800009d38000 [ 2430.658919] x23: 5a5a5a5a5a5a5a5a x22: ffff000038f09d80 x21: ffff8000084f0d14 [ 2430.659434] x20: ffff0000bf9a6ac0 x19: 0169696969696940 x18: 0000000000000000 [ 2430.659969] x17: ffff8000b6506000 x16: ffff800009eec000 x15: 0000000000004000 [ 2430.660637] x14: 0000000000000000 x13: 00000001000820a1 x12: 00000000000d1b19 [ 2430.661345] x11: 0004000800000000 x10: 0000000000000001 x9 : ffff8000084f0d14 [ 2430.662025] x8 : ffff0000bf9a6b40 x7 : ffff0000bf9a6b48 x6 : 0000000003470302 [ 2430.662695] x5 : ffff00002e41dcc0 x4 : ffff0000bf9aa3b0 x3 : 0000000003470342 [ 2430.663486] x2 : 0000000000000000 x1 : ffff8000084f0d14 x0 : fffffc0000000000 [ 2430.664217] Call trace: [ 2430.664528] kfree+0x78/0x348 [ 2430.664855] jffs2_free_inode+0x24/0x48 [ 2430.665233] i_callback+0x24/0x50 [ 2430.665528] rcu_do_batch+0x1ac/0x448 [ 2430.665892] rcu_core+0x28c/0x3c8 [ 2430.666151] rcu_core_si+0x18/0x28 [ 2430.666473] __do_softirq+0x138/0x3cc [ 2430.666781] irq_exit+0xf0/0x110 [ 2430.667065] handle_domain_irq+0x6c/0x98 [ 2430.667447] gic_handle_irq+0xac/0xe8 [ 2430.667739] call_on_irq_stack+0x28/0x54 The parameter passed to kfree was 5a5a5a5a, which corresponds to the target field of the jffs_inode_info structure. It was found that all variables in the jffs_inode_info structure were 5a5a5a5a, except for the first member sem. It is suspected that these variables are not initialized because they were set to 5a5a5a5a during memory testing, which is meant to detect uninitialized memory.The sem variable is initialized in the function jffs2_i_init_once, while other members are initialized in the function jffs2_init_inode_info. The function jffs2_init_inode_info is called after iget_locked, but in the iget_locked function, the destroy_inode process is triggered, which releases the inode and consequently, the target member of the inode is not initialized.In concurrent high pressure scenarios, iget_locked may enter the destroy_inode branch as described in the code. Since the destroy_inode functionality of jffs2 only releases the target, the fix method is to set target to NULL in jffs2_i_init_once. Signed-off-by: Wang Yong <wang.yong12@zte.com.cn> Reviewed-by: Lu Zhongjun <lu.zhongjun@zte.com.cn> Reviewed-by: Yang Tao <yang.tao172@zte.com.cn> Cc: Xu Xin <xu.xin16@zte.com.cn> Cc: Yang Yang <yang.yang29@zte.com.cn> Signed-off-by: Richard Weinberger <richard@nod.at>
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create to simplify the creation of SLAB caches. And change cache name from 'jffs2_tmp_dnode' to 'jffs2_tmp_dnode_info'. Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
Update the end of one sentence where a comment was truncated. (dwmw2) Fix a bunch of kernel-doc warnings: nodemgmt.c:72: warning: Function parameter or member 'sumsize' not described in 'jffs2_do_reserve_space' nodemgmt.c:72: warning: expecting prototype for jffs2_reserve_space(). Prototype was for jffs2_do_reserve_space() instead nodemgmt.c:76: warning: Function parameter or member 'sumsize' not described in 'jffs2_reserve_space' nodemgmt.c:76: warning: No description found for return value of 'jffs2_reserve_space' nodemgmt.c:503: warning: Function parameter or member 'ofs' not described in 'jffs2_add_physical_node_ref' nodemgmt.c:503: warning: Function parameter or member 'ic' not described in 'jffs2_add_physical_node_ref' nodemgmt.c:503: warning: Excess function parameter 'new' description in 'jffs2_add_physical_node_ref' nodemgmt.c:503: warning: No description found for return value of 'jffs2_add_physical_node_ref' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Richard Weinberger <richard@nod.at> Cc: linux-mtd@lists.infradead.org Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Richard Weinberger <richard@nod.at>
Utilize the %pe print specifier to get the symbolic error name as a string (i.e "-ENOMEM") in the log message instead of the error code to increase its readablility. This change was suggested in https://lore.kernel.org/all/92972476-0b1f-4d0a-9951-af3fc8bc6e65@suswa.mountain/ Signed-off-by: Christian Heusel <christian@heusel.eu> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
Add a check to make sure that the requested xattr node size is no larger
than the eraseblock minus the cleanmarker.
Unlike the usual inode nodes, the xattr nodes aren't split into parts
and spread across multiple eraseblocks, which means that a xattr node
must not occupy more than one eraseblock. If the requested xattr value is
too large, the xattr node can spill onto the next eraseblock, overwriting
the nodes and causing errors such as:
jffs2: argh. node added in wrong place at 0x0000b050(2)
jffs2: nextblock 0x0000a000, expected at 0000b00c
jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050,
read=0xfc892c93, calc=0x000000
jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed
at 0x01e00c. {848f,2fc4,0fef511f,59a3d171}
jffs2: Node at 0x0000000c with length 0x00001044 would run over the
end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x00000010: 0x1044 instead
This breaks the filesystem and can lead to KASAN crashes such as:
BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0
Read of size 4 at addr ffff88802c31e914 by task repro/830
CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Arch Linux 1.16.3-1-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xc4/0x620
? __virt_addr_valid+0x308/0x5b0
kasan_report+0xc1/0xf0
? jffs2_sum_add_kvec+0x125e/0x15d0
? jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_flash_direct_writev+0xa8/0xd0
jffs2_flash_writev+0x9c9/0xef0
? __x64_sys_setxattr+0xc4/0x160
? do_syscall_64+0x69/0x140
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: aa98d7cf59b5 ("[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)")
Signed-off-by: Ilya Denisyev <dev@elkcl.ru>
Link: https://lore.kernel.org/r/20240412155357.237803-1-dev@elkcl.ru
Signed-off-by: Christian Brauner <brauner@kernel.org>
Yes, yes, I know the slab people were planning on going slow and letting every subsystem fight this thing on their own. But let's just rip off the band-aid and get it over and done with. I don't want to see a number of unnecessary pull requests just to get rid of a flag that no longer has any meaning. This was mainly done with a couple of 'sed' scripts and then some manual cleanup of the end result. Link: https://lore.kernel.org/all/CAHk-=wji0u+OOtmAOD-5JV3SXcRJF___k_+8XNKmak0yd5vW1Q@mail.gmail.com/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This function is only called locally and does not need to be global. Since there is no external prototype, gcc warns about the non-static definition: fs/jffs2/debug.c:160:6: error: no previous prototype for '__jffs2_dbg_superblock_counts' [-Werror=missing-prototypes] Link: https://lkml.kernel.org/r/20231123110506.707903-3-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Kees Cook <keescook@chromium.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nicolas Schier <nicolas@fjasle.eu> Cc: Palmer Dabbelt <palmer@rivosinc.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull vfs fanotify fsid updates from Christian Brauner: "This work is part of the plan to enable fanotify to serve as a drop-in replacement for inotify. While inotify is availabe on all filesystems, fanotify currently isn't. In order to support fanotify on all filesystems two things are needed: (1) all filesystems need to support AT_HANDLE_FID (2) all filesystems need to report a non-zero f_fsid This contains (1) and allows filesystems to encode non-decodable file handlers for fanotify without implementing any exportfs operations by encoding a file id of type FILEID_INO64_GEN from i_ino and i_generation. Filesystems that want to opt out of encoding non-decodable file ids for fanotify that don't support NFS export can do so by providing an empty export_operations struct. This also partially addresses (2) by generating f_fsid for simple filesystems as well as freevxfs. Remaining filesystems will be dealt with by separate patches. Finally, this contains the patch from the current exportfs maintainers which moves exportfs under vfs with Chuck, Jeff, and Amir as maintainers and vfs.git as tree" * tag 'vfs-6.7.fsid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: MAINTAINERS: create an entry for exportfs fs: fix build error with CONFIG_EXPORTFS=m or not defined freevxfs: derive f_fsid from bdev->bd_dev fs: report f_fsid from s_dev for "simple" filesystems exportfs: support encoding non-decodeable file handles by default exportfs: define FILEID_INO64_GEN* file handle types exportfs: make ->encode_fh() a mandatory method for NFS export exportfs: add helpers to check if filesystem can encode/decode file handles
Pull vfs inode time accessor updates from Christian Brauner: "This finishes the conversion of all inode time fields to accessor functions as discussed on list. Changing timestamps manually as we used to do before is error prone. Using accessors function makes this robust. It does not contain the switch of the time fields to discrete 64 bit integers to replace struct timespec and free up space in struct inode. But after this, the switch can be trivially made and the patch should only affect the vfs if we decide to do it" * tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (86 commits) fs: rename inode i_atime and i_mtime fields security: convert to new timestamp accessors selinux: convert to new timestamp accessors apparmor: convert to new timestamp accessors sunrpc: convert to new timestamp accessors mm: convert to new timestamp accessors bpf: convert to new timestamp accessors ipc: convert to new timestamp accessors linux: convert to new timestamp accessors zonefs: convert to new timestamp accessors xfs: convert to new timestamp accessors vboxsf: convert to new timestamp accessors ufs: convert to new timestamp accessors udf: convert to new timestamp accessors ubifs: convert to new timestamp accessors tracefs: convert to new timestamp accessors sysv: convert to new timestamp accessors squashfs: convert to new timestamp accessors server: convert to new timestamp accessors client: convert to new timestamp accessors ...