linux.git/fs/jbd2, branch v6.15 Linux kernel source tree fs/jbd2: use sleeping version of __find_get_block() 2025-04-22T16:16:08+00:00 Davidlohr Bueso dave@stgolabs.net 2025-04-18T01:59:19+00:00 f76d4c28a46a9260d85e00dafc8f46d369365d33 Convert to the new nonatomic flavor to benefit from potential performance benefits and adapt in the future vs migration such that semantics are kept. - jbd2_journal_revoke(): can sleep (has might_sleep() in the beginning) - jbd2_journal_cancel_revoke(): only used from do_get_write_access() and do_get_create_access() which do sleep. So can sleep. - jbd2_clear_buffer_revoked_flags() - only called from journal commit code which sleeps. So can sleep. Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Link: https://kdevops.org/ext4/v6.15-rc2.html # [0] Link: https://lore.kernel.org/all/aAAEvcrmREWa1SKF@bombadil.infradead.org/ # [1] Link: https://lore.kernel.org/20250418015921.132400-6-dave@stgolabs.net Tested-by: kdevops@lists.linux.dev Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> 
Convert to the new nonatomic flavor to benefit from potential
performance benefits and adapt in the future vs migration such
that semantics are kept.

- jbd2_journal_revoke(): can sleep (has might_sleep() in the beginning)

- jbd2_journal_cancel_revoke(): only used from do_get_write_access() and
    do_get_create_access() which do sleep. So can sleep.

- jbd2_clear_buffer_revoked_flags() - only called from journal commit code
    which sleeps. So can sleep.

Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://kdevops.org/ext4/v6.15-rc2.html # [0]
Link: https://lore.kernel.org/all/aAAEvcrmREWa1SKF@bombadil.infradead.org/ # [1]
Link: https://lore.kernel.org/20250418015921.132400-6-dave@stgolabs.net
Tested-by: kdevops@lists.linux.dev
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
treewide: Switch/rename to timer_delete[_sync]() 2025-04-05T08:30:12+00:00 Thomas Gleixner tglx@linutronix.de 2025-04-05T08:17:26+00:00 8fa7292fee5c5240402371ea89ab285ec856c916 timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> 
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.

Conversion was done with coccinelle plus manual fixups where necessary.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
jbd2: add a missing data flush during file and fs synchronization 2025-03-21T04:59:28+00:00 Zhang Yi yi.zhang@huawei.com 2024-12-06T11:13:27+00:00 aac45075f6d79a63ac8dff93b3e1d7053a6ba628 When the filesystem performs file or filesystem synchronization (e.g., ext4_sync_file()), it queries the journal to determine whether to flush the file device through jbd2_trans_will_send_data_barrier(). If the target transaction has not started committing, it assumes that the journal will submit the flush command, allowing the filesystem to bypass a redundant flush command. However, this assumption is not always valid. If the journal is not located on the filesystem device, the journal commit thread will not submit the flush command unless the variable ->t_need_data_flush is set to 1. Consequently, the flush may be missed, and data may be lost following a power failure or system crash, even if the synchronization appears to succeed. Unfortunately, we cannot determine with certainty whether the target transaction will flush to the filesystem device before it commits. However, if it has not started committing, it must be the running transaction. Therefore, fix it by always set its t_need_data_flush to 1, ensuring that the committing thread will flush the filesystem device. Fixes: bbd2be369107 ("jbd2: Add function jbd2_trans_will_send_data_barrier()") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20241206111327.4171337-1-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> 
When the filesystem performs file or filesystem synchronization (e.g.,
ext4_sync_file()), it queries the journal to determine whether to flush
the file device through jbd2_trans_will_send_data_barrier(). If the
target transaction has not started committing, it assumes that the
journal will submit the flush command, allowing the filesystem to bypass
a redundant flush command. However, this assumption is not always valid.
If the journal is not located on the filesystem device, the journal
commit thread will not submit the flush command unless the variable
->t_need_data_flush is set to 1. Consequently, the flush may be missed,
and data may be lost following a power failure or system crash, even if
the synchronization appears to succeed.

Unfortunately, we cannot determine with certainty whether the target
transaction will flush to the filesystem device before it commits.
However, if it has not started committing, it must be the running
transaction. Therefore, fix it by always set its t_need_data_flush to 1,
ensuring that the committing thread will flush the filesystem device.

Fixes: bbd2be369107 ("jbd2: Add function jbd2_trans_will_send_data_barrier()")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241206111327.4171337-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2: remove jbd2_journal_unfile_buffer() 2025-03-18T04:15:25+00:00 Baokun Li libaokun1@huawei.com 2025-03-06T06:32:40+00:00 743717670a36b80dfd43896dac5074f8ba5f163f Since the function jbd2_journal_unfile_buffer() is no longer called anywhere after commit e5a120aeb57f ("jbd2: remove journal_head from descriptor buffers"), so let's remove it. Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20250306063240.157884-1-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> 
Since the function jbd2_journal_unfile_buffer() is no longer called
anywhere after commit e5a120aeb57f ("jbd2: remove journal_head from
descriptor buffers"), so let's remove it.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250306063240.157884-1-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2: fix off-by-one while erasing journal 2025-03-18T04:15:25+00:00 Zhang Yi yi.zhang@huawei.com 2025-02-17T06:59:55+00:00 18aba2adb3e2a676fff0d81e51f5045f3c636666 In __jbd2_journal_erase(), the block_stop parameter includes the last block of a contiguous region; however, the calculation of byte_stop is incorrect, as it does not account for the bytes in that last block. Consequently, the page cache is not cleared properly, which occasionally causes the ext4/050 test to fail. Since block_stop operates on inclusion semantics, it involves repeated increments and decrements by 1, significantly increasing the complexity of the calculations. Optimize the calculation and fix the incorrect byte_stop by make both block_stop and byte_stop to use exclusion semantics. This fixes a failure in fstests ext4/050. Fixes: 01d5d96542fd ("ext4: add discard/zeroout flags to journal flush") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20250217065955.3829229-1-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> 
In __jbd2_journal_erase(), the block_stop parameter includes the last
block of a contiguous region; however, the calculation of byte_stop is
incorrect, as it does not account for the bytes in that last block.
Consequently, the page cache is not cleared properly, which occasionally
causes the ext4/050 test to fail.

Since block_stop operates on inclusion semantics, it involves repeated
increments and decrements by 1, significantly increasing the complexity
of the calculations. Optimize the calculation and fix the incorrect
byte_stop by make both block_stop and byte_stop to use exclusion
semantics.

This fixes a failure in fstests ext4/050.

Fixes: 01d5d96542fd ("ext4: add discard/zeroout flags to journal flush")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250217065955.3829229-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4: remove references to bh->b_page 2025-03-18T04:15:25+00:00 Matthew Wilcox (Oracle) willy@infradead.org 2025-02-13T18:23:01+00:00 08be56fec0588972f6fd4a3ce4ced3265de43dd8 Buffer heads are attached to folios, not to pages. Also flush_dcache_page() is now deprecated in favour of flush_dcache_folio(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20250213182303.2133205-1-willy@infradead.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> 
Buffer heads are attached to folios, not to pages.  Also
flush_dcache_page() is now deprecated in favour of flush_dcache_folio().

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250213182303.2133205-1-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2: remove redundant function jbd2_journal_has_csum_v2or3_feature 2025-03-17T15:19:41+00:00 Eric Biggers ebiggers@google.com 2025-02-07T03:14:24+00:00 f6fc1584f500e0c036190f235b0857c6b05ee0d1 Since commit dd348f054b24 ("jbd2: switch to using the crc32c library"), jbd2_journal_has_csum_v2or3() and jbd2_journal_has_csum_v2or3_feature() are the same. Remove jbd2_journal_has_csum_v2or3_feature() and just keep jbd2_journal_has_csum_v2or3(). Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Link: https://patch.msgid.link/20250207031424.42755-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> 
Since commit dd348f054b24 ("jbd2: switch to using the crc32c library"),
jbd2_journal_has_csum_v2or3() and jbd2_journal_has_csum_v2or3_feature()
are the same.  Remove jbd2_journal_has_csum_v2or3_feature() and just
keep jbd2_journal_has_csum_v2or3().

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/20250207031424.42755-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2: do not try to recover wiped journal 2025-03-17T15:19:41+00:00 Jan Kara jack@suse.cz 2025-02-06T09:46:59+00:00 a662f3c03b754e1f97a2781fa242e95bdb139798 If a journal is wiped, we will set journal->j_tail to 0. However if 'write' argument is not set (as it happens for read-only device or for ocfs2), the on-disk superblock is not updated accordingly and thus jbd2_journal_recover() cat try to recover the wiped journal. Fix the check in jbd2_journal_recover() to use journal->j_tail for checking empty journal instead. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Zhang Yi <yi.zhang@huawei.com> Link: https://patch.msgid.link/20250206094657.20865-4-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> 
If a journal is wiped, we will set journal->j_tail to 0. However if
'write' argument is not set (as it happens for read-only device or for
ocfs2), the on-disk superblock is not updated accordingly and thus
jbd2_journal_recover() cat try to recover the wiped journal. Fix the
check in jbd2_journal_recover() to use journal->j_tail for checking
empty journal instead.

Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250206094657.20865-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2: remove wrong sb->s_sequence check 2025-03-17T15:19:41+00:00 Jan Kara jack@suse.cz 2025-02-06T09:46:58+00:00 e6eff39dd0fe4190c6146069cc16d160e71d1148 Journal emptiness is not determined by sb->s_sequence == 0 but rather by sb->s_start == 0 (which is set a few lines above). Furthermore 0 is a valid transaction ID so the check can spuriously trigger. Remove the invalid WARN_ON. CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Zhang Yi <yi.zhang@huawei.com> Link: https://patch.msgid.link/20250206094657.20865-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> 
Journal emptiness is not determined by sb->s_sequence == 0 but rather by
sb->s_start == 0 (which is set a few lines above). Furthermore 0 is a
valid transaction ID so the check can spuriously trigger. Remove the
invalid WARN_ON.

CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250206094657.20865-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2: Correct stale comment of release_buffer_page 2025-03-13T14:41:21+00:00 Kemeng Shi shikemeng@huaweicloud.com 2025-01-23T15:50:14+00:00 fd3b3d7f51e628f54329738e736a154f6929daab Update stale lock info in comment of release_buffer_page. Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Zhang Yi <yi.zhang@huawei.com> Link: https://patch.msgid.link/20250123155014.2097920-7-shikemeng@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> 
Update stale lock info in comment of release_buffer_page.

Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250123155014.2097920-7-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>