linux.git/fs/isofs, branch v3.15

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs

2014-04-08T00:59:17+00:00

Pull ext3 improvements, cleanups, reiserfs fix from Jan Kara:
 "various cleanups for ext2, ext3, udf, isofs, a documentation update
  for quota, and a fix of a race in reiserfs readdir implementation"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  reiserfs: fix race in readdir
  ext2: acl: remove unneeded include of linux/capability.h
  ext3: explicitly remove inode from orphan list after failed direct io
  fs/isofs/inode.c add __init to init_inodecache()
  ext3: Speedup WB_SYNC_ALL pass
  fs/quota/Kconfig: Update filesystems
  ext3: Update outdated comment before ext3_ordered_writepage()
  ext3: Update PF_MEMALLOC handling in ext3_write_inode()
  ext2/3: use prandom_u32() instead of get_random_bytes()
  ext3: remove an unneeded check in ext3_new_blocks()
  ext3: remove unneeded check in ext3_ordered_writepage()
  fs: Mark function as static in ext3/xattr_security.c
  fs: Mark function as static in ext3/dir.c
  fs: Mark function as static in ext2/xattr_security.c
  ext3: Add __init macro to init_inodecache
  ext2: Add __init macro to init_inodecache
  udf: Add __init macro to init_inodecache
  fs: udf: parse_options: blocksize check

fs: push sync_filesystem() down to the file system's remount_fs()

2014-03-13T14:14:33+00:00

Previously, the no-op "mount -o mount /dev/xxx" operation when the
file system is already mounted read-write causes an implied,
unconditional syncfs().  This seems pretty stupid, and it's certainly
documented or guaraunteed to do this, nor is it particularly useful,
except in the case where the file system was mounted rw and is getting
remounted read-only.

However, it's possible that there might be some file systems that are
actually depending on this behavior.  In most file systems, it's
probably fine to only call sync_filesystem() when transitioning from
read-write to read-only, and there are some file systems where this is
not needed at all (for example, for a pseudo-filesystem or something
like romfs).

Signed-off-by: "Theodore Ts'o" 
Cc: linux-fsdevel@vger.kernel.org
Cc: Christoph Hellwig 
Cc: Artem Bityutskiy 
Cc: Adrian Hunter 
Cc: Evgeniy Dushistov 
Cc: Jan Kara 
Cc: OGAWA Hirofumi 
Cc: Anders Larsen 
Cc: Phillip Lougher 
Cc: Kees Cook 
Cc: Mikulas Patocka 
Cc: Petr Vandrovec 
Cc: xfs@oss.sgi.com
Cc: linux-btrfs@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: codalist@coda.cs.cmu.edu
Cc: linux-ext4@vger.kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: fuse-devel@lists.sourceforge.net
Cc: cluster-devel@redhat.com
Cc: linux-mtd@lists.infradead.org
Cc: jfs-discussion@lists.sourceforge.net
Cc: linux-nfs@vger.kernel.org
Cc: linux-nilfs@vger.kernel.org
Cc: linux-ntfs-dev@lists.sourceforge.net
Cc: ocfs2-devel@oss.oracle.com
Cc: reiserfs-devel@vger.kernel.org

fs/isofs/inode.c add __init to init_inodecache()

2014-03-12T21:52:39+00:00

init_inodecache is only called by __init init_iso9660_fs

Signed-off-by: Fabian Frederick 
Signed-off-by: Jan Kara

isofs: don't pass dentry to isofs_hash{i,}_common()

2013-10-25T03:34:59+00:00

Signed-off-by: Al Viro

isofs: Refuse RW mount of the filesystem instead of making it RO

2013-07-31T20:14:50+00:00

Refuse RW mount of isofs filesystem. So far we just silently changed it
to RO mount but when the media is writeable, block layer won't notice
this change and thus will think device is used RW and will block eject
button of the drive. That is unexpected by users because for
non-writeable media eject button works just fine.

Userspace mount(8) command handles this just fine and retries mounting
with MS_RDONLY set so userspace shouldn't see any regression.  Plus any
tool mounting isofs is likely confronted with the case of read-only
media where block layer already refuses to mount the filesystem without
MS_RDONLY set so our behavior shouldn't be anything new for it.

Reported-by: Hui Wang 
Signed-off-by: Jan Kara

Don't pass inode to ->d_hash() and ->d_compare()

2013-06-29T08:57:36+00:00

Instances either don't look at it at all (the majority of cases) or
only want it to find the superblock (which can be had as dentry->d_sb).
A few cases that want more are actually safe with dentry->d_inode -
the only precaution needed is the check that it hadn't been replaced with
NULL by rmdir() or by overwriting rename(), which case should be simply
treated as cache miss.

Signed-off-by: Linus Torvalds 
Signed-off-by: Al Viro

[readdir] convert isofs

2013-06-29T08:56:47+00:00

Signed-off-by: Al Viro

fs: Readd the fs module aliases.

2013-03-13T01:55:21+00:00

I had assumed that the only use of module aliases for filesystems
prior to "fs: Limit sys_mount to only request filesystem modules."
was in request_module.  It turns out I was wrong.  At least mkinitcpio
in Arch linux uses these aliases.

So readd the preexising aliases, to keep from breaking userspace.

Userspace eventually will have to follow and use the same aliases the
kernel does.  So at some point we may be delete these aliases without
problems.  However that day is not today.

Signed-off-by: "Eric W. Biederman"

fs: Limit sys_mount to only request filesystem modules.

2013-03-04T03:36:31+00:00

Modify the request_module to prefix the file system type with "fs-"
and add aliases to all of the filesystems that can be built as modules
to match.

A common practice is to build all of the kernel code and leave code
that is not commonly needed as modules, with the result that many
users are exposed to any bug anywhere in the kernel.

Looking for filesystems with a fs- prefix limits the pool of possible
modules that can be loaded by mount to just filesystems trivially
making things safer with no real cost.

Using aliases means user space can control the policy of which
filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf
with blacklist and alias directives.  Allowing simple, safe,
well understood work-arounds to known problematic software.

This also addresses a rare but unfortunate problem where the filesystem
name is not the same as it's module name and module auto-loading
would not work.  While writing this patch I saw a handful of such
cases.  The most significant being autofs that lives in the module
autofs4.

This is relevant to user namespaces because we can reach the request
module in get_fs_type() without having any special permissions, and
people get uncomfortable when a user specified string (in this case
the filesystem type) goes all of the way to request_module.

After having looked at this issue I don't think there is any
particular reason to perform any filtering or permission checks beyond
making it clear in the module request that we want a filesystem
module.  The common pattern in the kernel is to call request_module()
without regards to the users permissions.  In general all a filesystem
module does once loaded is call register_filesystem() and go to sleep.
Which means there is not much attack surface exposed by loading a
filesytem module unless the filesystem is mounted.  In a user
namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT,
which most filesystems do not set today.

Acked-by: Serge Hallyn 
Acked-by: Kees Cook 
Reported-by: Kees Cook 
Signed-off-by: "Eric W. Biederman"

fs: encode_fh: return FILEID_INVALID if invalid fid_type

2013-02-26T07:46:10+00:00

This patch is a follow up on below patch:

[PATCH] exportfs: add FILEID_INVALID to indicate invalid fid_type
commit: 216b6cbdcbd86b1db0754d58886b466ae31f5a63

Signed-off-by: Namjae Jeon 
Signed-off-by: Vivek Trivedi 
Acked-by: Steven Whitehouse 
Acked-by: Sage Weil 
Signed-off-by: Al Viro