Pull AFS updates from David Howells:
 "There's some core VFS changes which affect a couple of filesystems:

   - Make the inode hash table RCU safe and providing some RCU-safe
     accessor functions. The search can then be done without taking the
     inode_hash_lock. Care must be taken because the object may be being
     deleted and no wait is made.

   - Allow iunique() to avoid taking the inode_hash_lock.

   - Allow AFS's callback processing to avoid taking the inode_hash_lock
     when using the inode table to find an inode to notify.

   - Improve Ext4's time updating. Konstantin Khlebnikov said "For now,
     I've plugged this issue with try-lock in ext4 lazy time update.
     This solution is much better."

  Then there's a set of changes to make a number of improvements to the
  AFS driver:

   - Improve callback (ie. third party change notification) processing
     by:

      (a) Relying more on the fact we're doing this under RCU and by
          using fewer locks. This makes use of the RCU-based inode
          searching outlined above.

      (b) Moving to keeping volumes in a tree indexed by volume ID
          rather than a flat list.

      (c) Making the server and volume records logically part of the
          cell. This means that a server record now points directly at
          the cell and the tree of volumes is there. This removes an N:M
          mapping table, simplifying things.

   - Improve keeping NAT or firewall channels open for the server
     callbacks to reach the client by actively polling the fileserver on
     a timed basis, instead of only doing it when we have an operation
     to process.

   - Improving detection of delayed or lost callbacks by including the
     parent directory in the list of file IDs to be queried when doing a
     bulk status fetch from lookup. We can then check to see if our copy
     of the directory has changed under us without us getting notified.

   - Determine aliasing of cells (such as a cell that is pointed to be a
     DNS alias). This allows us to avoid having ambiguity due to
     apparently different cells using the same volume and file servers.

   - Improve the fileserver rotation to do more probing when it detects
     that all of the addresses to a server are listed as non-responsive.
     It's possible that an address that previously stopped responding
     has become responsive again.

  Beyond that, lay some foundations for making some calls asynchronous:

   - Turn the fileserver cursor struct into a general operation struct
     and hang the parameters off of that rather than keeping them in
     local variables and hang results off of that rather than the call
     struct.

   - Implement some general operation handling code and simplify the
     callers of operations that affect a volume or a volume component
     (such as a file). Most of the operation is now done by core code.

   - Operations are supplied with a table of operations to issue
     different variants of RPCs and to manage the completion, where all
     the required data is held in the operation object, thereby allowing
     these to be called from a workqueue.

   - Put the standard "if (begin), while(select), call op, end" sequence
     into a canned function that just emulates the current behaviour for
     now.

  There are also some fixes interspersed:

   - Don't let the EACCES from ICMP6 mapping reach the user as such,
     since it's confusing as to whether it's a filesystem error. Convert
     it to EHOSTUNREACH.

   - Don't use the epoch value acquired through probing a server. If we
     have two servers with the same UUID but in different cells, it's
     hard to draw conclusions from them having different epoch values.

   - Don't interpret the argument to the CB.ProbeUuid RPC as a
     fileserver UUID and look up a fileserver from it.

   - Deal with servers in different cells having the same UUIDs. In the
     event that a CB.InitCallBackState3 RPC is received, we have to
     break the callback promises for every server record matching that
     UUID.

   - Don't let afs_statfs return values that go below 0.

   - Don't use running fileserver probe state to make server selection
     and address selection decisions on. Only make decisions on final
     state as the running state is cleared at the start of probing"

Acked-by: Al Viro <viro@zeniv.linux.org.uk> (fs/inode.c part)

* tag 'afs-next-20200604' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (27 commits)
  afs: Adjust the fileserver rotation algorithm to reprobe/retry more quickly
  afs: Show more a bit more server state in /proc/net/afs/servers
  afs: Don't use probe running state to make decisions outside probe code
  afs: Fix afs_statfs() to not let the values go below zero
  afs: Fix the by-UUID server tree to allow servers with the same UUID
  afs: Reorganise volume and server trees to be rooted on the cell
  afs: Add a tracepoint to track the lifetime of the afs_volume struct
  afs: Detect cell aliases 3 - YFS Cells with a canonical cell name op
  afs: Detect cell aliases 2 - Cells with no root volumes
  afs: Detect cell aliases 1 - Cells with root volumes
  afs: Implement client support for the YFSVL.GetCellName RPC op
  afs: Retain more of the VLDB record for alias detection
  afs: Fix handling of CB.ProbeUuid cache manager op
  afs: Don't get epoch from a server because it may be ambiguous
  afs: Build an abstraction around an "operation" concept
  afs: Rename struct afs_fs_cursor to afs_operation
  afs: Remove the error argument from afs_protocol_error()
  afs: Set error flag rather than return error from file status decode
  afs: Make callback processing more efficient.
  afs: Show more information in /proc/net/afs/servers
  ...

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...

Make the inode hash table RCU searchable so that searches that want to
access or modify an inode without taking a ref on that inode can do so
without taking the inode hash table lock.

The main thing this requires is some RCU annotation on the list
manipulation operations.  Inodes are already freed by RCU in most cases.

Users of this interface must take care as the inode may be still under
construction or may be being torn down around them.

There are at least three instances where this can be of use:

 (1) Testing whether the inode number iunique() is going to return is
     currently unique (the iunique_lock is still held).

 (2) Ext4 date stamp updating.

 (3) AFS callback breaking.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
cc: linux-ext4@vger.kernel.org
cc: linux-afs@lists.infradead.org

Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from  userspace in common code.  This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.

As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Use *foo makes the toolchain to think that this is an emphasis, causing
those warnings:

	./fs/inode.c:1609: WARNING: Inline emphasis start-string without end-string.
	./fs/inode.c:1609: WARNING: Inline emphasis start-string without end-string.
	./fs/inode.c:1615: WARNING: Inline emphasis start-string without end-string.

So, use, instead, ``*foo``, in order to mark it as a literal block.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/e8da46a0e57f2af6d63a0c53665495075698e28a.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

As reported by Jann, ihold() does not in fact guarantee inode
persistence. And instead of making it so, replace the usage of inode
pointers with a per boot, machine wide, unique inode identifier.

This sequence number is global, but shared (file backed) futexes are
rare enough that this should not become a performance issue.

Reported-by: Jann Horn <jannh@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>

Pull misc vfs updates from Al Viro:

 - bmap series from cmaiolino

 - getting rid of convolutions in copy_mount_options() (use a couple of
   copy_from_user() instead of the __get_user() crap)

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  saner copy_mount_options()
  fibmap: Reject negative block numbers
  fibmap: Use bmap instead of ->bmap method in ioctl_fibmap
  ecryptfs: drop direct calls to ->bmap
  cachefiles: drop direct usage of ->bmap method.
  fs: Enable bmap() function to properly return errors

Pull vfs timestamp updates from Al Viro:
 "More 64bit timestamp work"

* 'imm.timestamp' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  kernfs: don't bother with timestamp truncation
  fs: Do not overload update_time
  fs: Delete timespec64_trunc()
  fs: ubifs: Eliminate timespec64_trunc() usage
  fs: ceph: Delete timespec64_trunc() usage
  fs: cifs: Delete usage of timespec64_trunc
  fs: fat: Eliminate timespec64_trunc() usage
  utimes: Clamp the timestamps in notify_change()

By now, bmap() will either return the physical block number related to
the requested file offset or 0 in case of error or the requested offset
maps into a hole.
This patch makes the needed changes to enable bmap() to proper return
errors, using the return value as an error return, and now, a pointer
must be passed to bmap() to be filled with the mapped physical block.

It will change the behavior of bmap() on return:

- negative value in case of error
- zero on success or map fell into a hole

In case of a hole, the *block will be zero too

Since this is a prep patch, by now, the only error return is -EINVAL if
->bmap doesn't exist.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Casefolded encrypted directories will use a new dirhash method that
requires a secret key.  If the directory uses a v2 encryption policy,
it's easy to derive this key from the master key using HKDF.  However,
v1 encryption policies don't provide a way to derive additional keys.

Therefore, don't allow casefolding on directories that use a v1 policy.
Specifically, make it so that trying to enable casefolding on a
directory that has a v1 policy fails, trying to set a v1 policy on a
casefolded directory fails, and trying to open a casefolded directory
that has a v1 policy (if one somehow exists on-disk) fails.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
[EB: improved commit message, updated fscrypt.rst, and other cleanups]
Link: https://lore.kernel.org/r/20200120223201.241390-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>