->permission(), ->get_link() and ->inode_get_acl() might dereference
->s_fs_info (and, in case of ->permission(), ->s_fs_info->fc->user_ns
as well) when called from rcu pathwalk.

Freeing ->s_fs_info->fc is rcu-delayed; we need to make freeing ->s_fs_info
and dropping ->user_ns rcu-delayed too.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull vfs rw updates from Christian Brauner:
 "This contains updates from Amir for read-write backing file helpers
  for stacking filesystems such as overlayfs:

   - Fanotify is currently in the process of introducing pre content
     events. Roughly, a new permission event will be added indicating
     that it is safe to write to the file being accessed. These events
     are used by hierarchical storage managers to e.g., fill the content
     of files on first access.

     During that work we noticed that our current permission checking is
     inconsistent in rw_verify_area() and remap_verify_area().
     Especially in the splice code permission checking is done multiple
     times. For example, one time for the whole range and then again for
     partial ranges inside the iterator.

     In addition, we mostly do permission checking before we call
     file_start_write() except for a few places where we call it after.
     For pre-content events we need such permission checking to be done
     before file_start_write(). So this is a nice reason to clean this
     all up.

     After this series, all permission checking is done before
     file_start_write().

     As part of this cleanup we also massaged the splice code a bit. We
     got rid of a few helpers because we are alredy drowning in special
     read-write helpers. We also cleaned up the return types for splice
     helpers.

   - Introduce generic read-write helpers for backing files. This lifts
     some overlayfs code to common code so it can be used by the FUSE
     passthrough work coming in over the next cycles. Make Amir and
     Miklos the maintainers for this new subsystem of the vfs"

* tag 'vfs-6.8.rw' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
  fs: fix __sb_write_started() kerneldoc formatting
  fs: factor out backing_file_mmap() helper
  fs: factor out backing_file_splice_{read,write}() helpers
  fs: factor out backing_file_{read,write}_iter() helpers
  fs: prepare for stackable filesystems backing file helpers
  fsnotify: optionally pass access range in file permission hooks
  fsnotify: assert that file_start_write() is not held in permission hooks
  fsnotify: split fsnotify_perm() into two hooks
  fs: use splice_copy_file_range() inline helper
  splice: return type ssize_t from all helpers
  fs: use do_splice_direct() for nfsd/ksmbd server-side-copy
  fs: move file_start_write() into direct_splice_actor()
  fs: fork splice_file_range() from do_splice_direct()
  fs: create {sb,file}_write_not_started() helpers
  fs: create file_write_started() helper
  fs: create __sb_write_started() helper
  fs: move kiocb_start_write() into vfs_iocb_iter_write()
  fs: move permission hook out of do_iter_read()
  fs: move permission hook out of do_iter_write()
  fs: move file_start_write() into vfs_iter_write()
  ...

generic_copy_file_range() is just a wrapper around splice_file_range(),
which caps the maximum copy length.

The only caller of splice_file_range(), namely __ceph_copy_file_range()
is already ready to cope with short copy.

Move the length capping into splice_file_range() and replace the exported
symbol generic_copy_file_range() with a simple inline helper.

Suggested-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-fsdevel/20231204083849.GC32438@lst.de/
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231212094440.250945-3-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>

The new fuse init flag FUSE_DIRECT_IO_ALLOW_MMAP breaks assumptions made by
FOPEN_PARALLEL_DIRECT_WRITES and causes test generic/095 to hit
BUG_ON(fi->writectr < 0) assertions in fuse_set_nowrite():

generic/095 5s ...
  kernel BUG at fs/fuse/dir.c:1756!
...
  ? fuse_set_nowrite+0x3d/0xdd
  ? do_raw_spin_unlock+0x88/0x8f
  ? _raw_spin_unlock+0x2d/0x43
  ? fuse_range_is_writeback+0x71/0x84
  fuse_sync_writes+0xf/0x19
  fuse_direct_io+0x167/0x5bd
  fuse_direct_write_iter+0xf0/0x146

Auto disable FOPEN_PARALLEL_DIRECT_WRITES when server negotiated
FUSE_DIRECT_IO_ALLOW_MMAP.

Fixes: e78662e818f9 ("fuse: add a new fuse init flag to relax restrictions in no cache mode")
Cc: <stable@vger.kernel.org> # v6.6
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

fuse_dax_conn_free() will be called when fuse_fill_super_common() fails
after fuse_dax_conn_alloc(). Then deactivate_locked_super() in
virtio_fs_get_tree() will call virtio_kill_sb() to release the discarded
superblock. This will call fuse_dax_conn_free() again in fuse_conn_put(),
resulting in a possible double free.

Fixes: 1dd539577c42 ("virtiofs: add a mount option to enable dax")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # v5.10
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Fuse submounts do not perform a lookup for the nodeid that they inherit
from their parent.  Instead, the code decrements the nlookup on the
submount's fuse_inode when it is instantiated, and no forget is
performed when a submount root is evicted.

Trouble arises when the submount's parent is evicted despite the
submount itself being in use.  In this author's case, the submount was
in a container and deatched from the initial mount namespace via a
MNT_DEATCH operation.  When memory pressure triggered the shrinker, the
inode from the parent was evicted, which triggered enough forgets to
render the submount's nodeid invalid.

Since submounts should still function, even if their parent goes away,
solve this problem by sharing refcounted state between the parent and
its submount.  When all of the references on this shared state reach
zero, it's safe to forget the final lookup of the fuse nodeid.

Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: stable@vger.kernel.org
Fixes: 1866d779d5d2 ("fuse: Allow fuse_fill_super_common() for submounts")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Although DIRECT_IO_RELAX's initial usage is to allow shared mmap, its
description indicates a purpose of reducing memory footprint. This
may imply that it could be further used to relax other DIRECT_IO
operations in the future.

Replace it with a flag DIRECT_IO_ALLOW_MMAP which does only one thing,
allow shared mmap of DIRECT_IO files while still bypassing the cache
on regular reads and writes.

[Miklos] Also Keep DIRECT_IO_RELAX definition for backward compatibility.

Signed-off-by: Tyler Fanelli <tfanelli@redhat.com>
Fixes: e78662e818f9 ("fuse: add a new fuse init flag to relax restrictions in no cache mode")
Cc: <stable@vger.kernel.org> # v6.6
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Pull vfs fanotify fsid updates from Christian Brauner:
 "This work is part of the plan to enable fanotify to serve as a drop-in
  replacement for inotify. While inotify is availabe on all filesystems,
  fanotify currently isn't.

  In order to support fanotify on all filesystems two things are needed:

   (1) all filesystems need to support AT_HANDLE_FID

   (2) all filesystems need to report a non-zero f_fsid

  This contains (1) and allows filesystems to encode non-decodable file
  handlers for fanotify without implementing any exportfs operations by
  encoding a file id of type FILEID_INO64_GEN from i_ino and
  i_generation.

  Filesystems that want to opt out of encoding non-decodable file ids
  for fanotify that don't support NFS export can do so by providing an
  empty export_operations struct.

  This also partially addresses (2) by generating f_fsid for simple
  filesystems as well as freevxfs. Remaining filesystems will be dealt
  with by separate patches.

  Finally, this contains the patch from the current exportfs maintainers
  which moves exportfs under vfs with Chuck, Jeff, and Amir as
  maintainers and vfs.git as tree"

* tag 'vfs-6.7.fsid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  MAINTAINERS: create an entry for exportfs
  fs: fix build error with CONFIG_EXPORTFS=m or not defined
  freevxfs: derive f_fsid from bdev->bd_dev
  fs: report f_fsid from s_dev for "simple" filesystems
  exportfs: support encoding non-decodeable file handles by default
  exportfs: define FILEID_INO64_GEN* file handle types
  exportfs: make ->encode_fh() a mandatory method for NFS export
  exportfs: add helpers to check if filesystem can encode/decode file handles

Pull vfs inode time accessor updates from Christian Brauner:
 "This finishes the conversion of all inode time fields to accessor
  functions as discussed on list. Changing timestamps manually as we
  used to do before is error prone. Using accessors function makes this
  robust.

  It does not contain the switch of the time fields to discrete 64 bit
  integers to replace struct timespec and free up space in struct inode.
  But after this, the switch can be trivially made and the patch should
  only affect the vfs if we decide to do it"

* tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (86 commits)
  fs: rename inode i_atime and i_mtime fields
  security: convert to new timestamp accessors
  selinux: convert to new timestamp accessors
  apparmor: convert to new timestamp accessors
  sunrpc: convert to new timestamp accessors
  mm: convert to new timestamp accessors
  bpf: convert to new timestamp accessors
  ipc: convert to new timestamp accessors
  linux: convert to new timestamp accessors
  zonefs: convert to new timestamp accessors
  xfs: convert to new timestamp accessors
  vboxsf: convert to new timestamp accessors
  ufs: convert to new timestamp accessors
  udf: convert to new timestamp accessors
  ubifs: convert to new timestamp accessors
  tracefs: convert to new timestamp accessors
  sysv: convert to new timestamp accessors
  squashfs: convert to new timestamp accessors
  server: convert to new timestamp accessors
  client: convert to new timestamp accessors
  ...

Similar to the common FILEID_INO32* file handle types, define common
FILEID_INO64* file handle types.

The type values of FILEID_INO64_GEN and FILEID_INO64_GEN_PARENT are the
values returned by fuse and xfs for 64bit ino encoded file handle types.

Note that these type value are filesystem specific and they do not define
a universal file handle format, for example:
fuse encodes FILEID_INO64_GEN as [ino-hi32,ino-lo32,gen] and xfs encodes
FILEID_INO64_GEN as [hostr-order-ino64,gen] (a.k.a xfs_fid64).

The FILEID_INO64_GEN fhandle type is going to be used for file ids for
fanotify from filesystems that do not support NFS export.

Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231023180801.2953446-4-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>