Pull fuse updates from Miklos Szeredi:

 - Revert non-waiting FLUSH due to a regression

 - Fix a lookup counter leak in readdirplus

 - Add an option to allow shared mmaps in no-cache mode

 - Add btime support and statx intrastructure to the protocol

 - Invalidate positive/negative dentry on failed create/delete

* tag 'fuse-update-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: conditionally fill kstat in fuse_do_statx()
  fuse: invalidate dentry on EEXIST creates or ENOENT deletes
  fuse: cache btime
  fuse: implement statx
  fuse: add ATTR_TIMEOUT macro
  fuse: add STATX request
  fuse: handle empty request_mask in statx
  fuse: write back dirty pages before direct write in direct_io_relax mode
  fuse: add a new fuse init flag to relax restrictions in no cache mode
  fuse: invalidate page cache pages before direct write
  fuse: nlookup missing decrement in fuse_direntplus_link
  Revert "fuse: in fuse_flush only wait if someone wants the return code"

Pull MM updates from Andrew Morton:

 - Some swap cleanups from Ma Wupeng ("fix WARN_ON in
   add_to_avail_list")

 - Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
   reduces the special-case code for handling hugetlb pages in GUP. It
   also speeds up GUP handling of transparent hugepages.

 - Peng Zhang provides some maple tree speedups ("Optimize the fast path
   of mas_store()").

 - Sergey Senozhatsky has improved te performance of zsmalloc during
   compaction (zsmalloc: small compaction improvements").

 - Domenico Cerasuolo has developed additional selftest code for zswap
   ("selftests: cgroup: add zswap test program").

 - xu xin has doe some work on KSM's handling of zero pages. These
   changes are mainly to enable the user to better understand the
   effectiveness of KSM's treatment of zero pages ("ksm: support
   tracking KSM-placed zero-pages").

 - Jeff Xu has fixes the behaviour of memfd's
   MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
   MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").

 - David Howells has fixed an fscache optimization ("mm, netfs, fscache:
   Stop read optimisation when folio removed from pagecache").

 - Axel Rasmussen has given userfaultfd the ability to simulate memory
   poisoning ("add UFFDIO_POISON to simulate memory poisoning with
   UFFD").

 - Miaohe Lin has contributed some routine maintenance work on the
   memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
   check").

 - Peng Zhang has contributed some maintenance work on the maple tree
   code ("Improve the validation for maple tree and some cleanup").

 - Hugh Dickins has optimized the collapsing of shmem or file pages into
   THPs ("mm: free retracted page table by RCU").

 - Jiaqi Yan has a patch series which permits us to use the healthy
   subpages within a hardware poisoned huge page for general purposes
   ("Improve hugetlbfs read on HWPOISON hugepages").

 - Kemeng Shi has done some maintenance work on the pagetable-check code
   ("Remove unused parameters in page_table_check").

 - More folioification work from Matthew Wilcox ("More filesystem folio
   conversions for 6.6"), ("Followup folio conversions for zswap"). And
   from ZhangPeng ("Convert several functions in page_io.c to use a
   folio").

 - page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").

 - Baoquan He has converted some architectures to use the
   GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
   architectures to take GENERIC_IOREMAP way").

 - Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
   batched/deferred tlb shootdown during page reclamation/migration").

 - Better maple tree lockdep checking from Liam Howlett ("More strict
   maple tree lockdep"). Liam also developed some efficiency
   improvements ("Reduce preallocations for maple tree").

 - Cleanup and optimization to the secondary IOMMU TLB invalidation,
   from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
   upgrade").

 - Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
   for arm64").

 - Kemeng Shi provides some maintenance work on the compaction code
   ("Two minor cleanups for compaction").

 - Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
   most file-backed faults under the VMA lock").

 - Aneesh Kumar contributes code to use the vmemmap optimization for DAX
   on ppc64, under some circumstances ("Add support for DAX vmemmap
   optimization for ppc64").

 - page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
   data in page_ext"), ("minor cleanups to page_ext header").

 - Some zswap cleanups from Johannes Weiner ("mm: zswap: three
   cleanups").

 - kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").

 - VMA handling cleanups from Kefeng Wang ("mm: convert to
   vma_is_initial_heap/stack()").

 - DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
   implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
   address ranges and DAMON monitoring targets").

 - Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").

 - Liam Howlett has improved the maple tree node replacement code
   ("maple_tree: Change replacement strategy").

 - ZhangPeng has a general code cleanup - use the K() macro more widely
   ("cleanup with helper macro K()").

 - Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
   memmap on memory feature on ppc64").

 - pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
   in page_alloc"), ("Two minor cleanups for get pageblock
   migratetype").

 - Vishal Moola introduces a memory descriptor for page table tracking,
   "struct ptdesc" ("Split ptdesc from struct page").

 - memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
   for vm.memfd_noexec").

 - MM include file rationalization from Hugh Dickins ("arch: include
   asm/cacheflush.h in asm/hugetlb.h").

 - THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
   output").

 - kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
   object_cache instead of kmemleak_initialized").

 - More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
   and _folio_order").

 - A VMA locking scalability improvement from Suren Baghdasaryan
   ("Per-VMA lock support for swap and userfaults").

 - pagetable handling cleanups from Matthew Wilcox ("New page table
   range API").

 - A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
   using page->private on tail pages for THP_SWAP + cleanups").

 - Cleanups and speedups to the hugetlb fault handling from Matthew
   Wilcox ("Change calling convention for ->huge_fault").

 - Matthew Wilcox has also done some maintenance work on the MM
   subsystem documentation ("Improve mm documentation").

* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
  maple_tree: shrink struct maple_tree
  maple_tree: clean up mas_wr_append()
  secretmem: convert page_is_secretmem() to folio_is_secretmem()
  nios2: fix flush_dcache_page() for usage from irq context
  hugetlb: add documentation for vma_kernel_pagesize()
  mm: add orphaned kernel-doc to the rst files.
  mm: fix clean_record_shared_mapping_range kernel-doc
  mm: fix get_mctgt_type() kernel-doc
  mm: fix kernel-doc warning from tlb_flush_rmaps()
  mm: remove enum page_entry_size
  mm: allow ->huge_fault() to be called without the mmap_lock held
  mm: move PMD_ORDER to pgtable.h
  mm: remove checks for pte_index
  memcg: remove duplication detection for mem_cgroup_uncharge_swap
  mm/huge_memory: work on folio->swap instead of page->private when splitting folio
  mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
  mm/swap: use dedicated entry for swap in folio
  mm/swap: stop using page->private on tail pages for THP_SWAP
  selftests/mm: fix WARNING comparing pointer to 0
  selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
  ...

The code path

fuse_update_attributes
    fuse_update_get_attr
        fuse_do_statx

has the risk to use a NULL pointer for struct kstat *stat, although current
callers of fuse_update_attributes() only set request_mask to values that
will trigger the call of fuse_do_getattr(), which already handles the NULL
pointer.  Future updates might miss that fuse_do_statx() does not handle it
it is safer to add a condition already right now.

Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Fixes: d3045530bdd2 ("fuse: implement statx")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Pull vfs timestamp updates from Christian Brauner:
 "This adds VFS support for multi-grain timestamps and converts tmpfs,
  xfs, ext4, and btrfs to use them. This carries acks from all relevant
  filesystems.

  The VFS always uses coarse-grained timestamps when updating the ctime
  and mtime after a change. This has the benefit of allowing filesystems
  to optimize away a lot of metadata updates, down to around 1 per
  jiffy, even when a file is under heavy writes.

  Unfortunately, this has always been an issue when we're exporting via
  NFSv3, which relies on timestamps to validate caches. A lot of changes
  can happen in a jiffy, so timestamps aren't sufficient to help the
  client decide to invalidate the cache.

  Even with NFSv4, a lot of exported filesystems don't properly support
  a change attribute and are subject to the same problems with timestamp
  granularity. Other applications have similar issues with timestamps
  (e.g., backup applications).

  If we were to always use fine-grained timestamps, that would improve
  the situation, but that becomes rather expensive, as the underlying
  filesystem would have to log a lot more metadata updates.

  This introduces fine-grained timestamps that are used when they are
  actively queried.

  This uses the 31st bit of the ctime tv_nsec field to indicate that
  something has queried the inode for the mtime or ctime. When this flag
  is set, on the next mtime or ctime update, the kernel will fetch a
  fine-grained timestamp instead of the usual coarse-grained one.

  As POSIX generally mandates that when the mtime changes, the ctime
  must also change the kernel always stores normalized ctime values, so
  only the first 30 bits of the tv_nsec field are ever used.

  Filesytems can opt into this behavior by setting the FS_MGTIME flag in
  the fstype. Filesystems that don't set this flag will continue to use
  coarse-grained timestamps.

  Various preparatory changes, fixes and cleanups are included:

   - Fixup all relevant places where POSIX requires updating ctime
     together with mtime. This is a wide-range of places and all
     maintainers provided necessary Acks.

   - Add new accessors for inode->i_ctime directly and change all
     callers to rely on them. Plain accesses to inode->i_ctime are now
     gone and it is accordingly rename to inode->__i_ctime and commented
     as requiring accessors.

   - Extend generic_fillattr() to pass in a request mask mirroring in a
     sense the statx() uapi. This allows callers to pass in a request
     mask to only get a subset of attributes filled in.

   - Rework timestamp updates so it's possible to drop the @now
     parameter the update_time() inode operation and associated helpers.

   - Add inode_update_timestamps() and convert all filesystems to it
     removing a bunch of open-coding"

* tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits)
  btrfs: convert to multigrain timestamps
  ext4: switch to multigrain timestamps
  xfs: switch to multigrain timestamps
  tmpfs: add support for multigrain timestamps
  fs: add infrastructure for multigrain timestamps
  fs: drop the timespec64 argument from update_time
  xfs: have xfs_vn_update_time gets its own timestamp
  fat: make fat_update_time get its own timestamp
  fat: remove i_version handling from fat_update_time
  ubifs: have ubifs_update_time use inode_update_timestamps
  btrfs: have it use inode_update_timestamps
  fs: drop the timespec64 arg from generic_update_time
  fs: pass the request_mask to generic_fillattr
  fs: remove silly warning from current_time
  gfs2: fix timestamp handling on quota inodes
  fs: rename i_ctime field to __i_ctime
  selinux: convert to ctime accessor functions
  security: convert to ctime accessor functions
  apparmor: convert to ctime accessor functions
  sunrpc: convert to ctime accessor functions
  ...

Remove the unnecessary encoding of page order into an enum and pass the
page order directly.  That lets us get rid of pe_order().

The switch constructs have to be changed to if/else constructs to prevent
GCC from warning on builds with 3-level page tables where PMD_ORDER and
PUD_ORDER have the same value.

If you are looking at this commit because your driver stopped compiling,
look at the previous commit as well and audit your driver to be sure it
doesn't depend on mmap_lock being held in its ->huge_fault method.

[willy@infradead.org: use "order %u" to match the (non dev_t) style]
  Link: https://lkml.kernel.org/r/ZOUYekbtTv+n8hYf@casper.infradead.org
Link: https://lkml.kernel.org/r/20230818202335.2739663-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The EEXIST errors returned from server are strong sign that a local
negative dentry should be invalidated.  Similarly, The ENOENT errors from
server can also be a sign of revalidate failure.

This commit invalidates dentries on EEXIST creates and ENOENT deletes by
calling fuse_invalidate_entry(), which improves the consistency with no
performance degradation.

Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Not all inode attributes are supported by all filesystems, but for the
basic stats (which are returned by stat(2) and friends) all of them will
have some value, even if that doesn't reflect a real attribute of the file.

Btime is different, in that filesystems are free to report or not report a
value in statx.  If the value is available, then STATX_BTIME bit is set in
stx_mask.

When caching the value of btime, remember the availability of the attribute
as well as the value (if available).  This is done by using the
FUSE_I_BTIME bit in fuse_inode->state to indicate availability, while using
fuse_inode->inval_mask & STATX_BTIME to indicate the state of the cache
itself (i.e. set if cache is invalid, and cleared if cache is valid).

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Allow querying btime.  When btime is requested in mask, then FUSE_STATX
request is sent.  Otherwise keep using FUSE_GETATTR.

The userspace interface for statx matches that of the statx(2) API.
However there are limitations on how this interface is used:

 - returned basic stats and btime are used, stx_attributes, etc. are
   ignored

 - always query basic stats and btime, regardless of what was requested

 - requested sync type is ignored, the default is passed to the server

 - if server returns with some attributes missing from the result_mask,
   then no attributes will be cached

 - btime is not cached yet (next patch will fix that)

For new inodes initialize fi->inval_mask to "all invalid", instead of "all
valid" as previously.  Also only clear basic stats from inval_mask when
caching attributes.  This will result in the caching logic not thinking
that btime is cached.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Next patch will introduce yet another type attribute reply.  Add a macro
that can handle attribute timeouts for all of the structs.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

If no attribute is requested, then don't send request to userspace.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>