linux.git/fs/fuse/dir.c, branch v3.10

fuse: fix readdirplus Oops in fuse_dentry_revalidate

2013-06-03T12:40:22+00:00

Fix bug introduced by commit 4582a4ab2a "FUSE: Adapt readdirplus to application
usage patterns".

We need to check for a positive dentry; negative dentries are not added by
readdirplus.  Secondly we need to advise the use of readdirplus on the *parent*,
otherwise the whole thing is useless.  Thirdly all this is only relevant if
"readdirplus_auto" mode is selected by the filesystem.

We advise the use of readdirplus only if the dentry was still valid.  If we had
to redo the lookup then there was no use in doing the -plus version.

Reported-by: Bernd Schubert 
Signed-off-by: Miklos Szeredi 
CC: Feng Shuo 
CC: stable@vger.kernel.org

fuse: truncate file if async dio failed

2013-04-18T08:55:24+00:00

The patch improves error handling in fuse_direct_IO(): if we successfully
submitted several fuse requests on behalf of synchronous direct write
extending file and some of them failed, let's try to do our best to clean-up.

Changed in v2: reuse fuse_do_setattr(). Thanks to Brian for suggestion.

Signed-off-by: Maxim Patlasov 
Signed-off-by: Miklos Szeredi

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2013-02-27T04:16:07+00:00

Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...

new helper: file_inode(file)

2013-02-23T04:31:31+00:00

Signed-off-by: Al Viro

fuse: allow control of adaptive readdirplus use

2013-02-07T13:25:44+00:00

For some filesystems (e.g. GlusterFS), the cost of performing a
normal readdir and readdirplus are identical.  Since adaptively
using readdirplus has no benefit for those systems, give
users/filesystems the option to control adaptive readdirplus use.

v2 of this patch incorporates Miklos's suggestion to simplify the code,
as well as improving consistency of macro names and documentation.

Signed-off-by: Eric Wong 
Signed-off-by: Miklos Szeredi

fuse: don't WARN when nlink is zero

2013-02-04T14:57:42+00:00

drop_nlink() warns if nlink is already zero.  This is triggerable by a buggy
userspace filesystem.  The cure, I think, is worse than the disease so disable
the warning.

Reported-by: Tero Roponen 
Signed-off-by: Miklos Szeredi

FUSE: Adapt readdirplus to application usage patterns

2013-01-31T16:08:11+00:00

Use the same adaptive readdirplus mechanism as NFS:

http://permalink.gmane.org/gmane.linux.nfs/49299

If the user space implementation wants to disable readdirplus
temporarily, it could just return ENOTSUPP. Then kernel will
recall it with readdir.

Signed-off-by: Feng Shuo 
Signed-off-by: Miklos Szeredi

Do not use RCU for current process credentials

2013-01-31T16:08:10+00:00

Commit c69e8d9c0 added rcu lock to fuse/dir.c It was assuming
that 'task' is some other process but in fact this parameter always
equals to 'current'. Inline this parameter to make it more readable
and remove RCU lock as it is not needed when access current process
credentials.

Signed-off-by: Anatol Pomozov 
Signed-off-by: Miklos Szeredi

fuse: use req->page_descs[] for argpages cases

2013-01-24T15:21:27+00:00

Previously, anyone who set flag 'argpages' only filled req->pages[] and set
per-request page_offset. This patch re-works all cases where argpages=1 to
fill req->page_descs[] properly.

Having req->page_descs[] filled properly allows to re-work fuse_copy_pages()
to copy page fragments described by req->page_descs[]. This will be useful
for next patches optimizing direct_IO.

Signed-off-by: Maxim Patlasov 
Signed-off-by: Miklos Szeredi

fuse: categorize fuse_get_req()

2013-01-24T15:21:25+00:00

The patch categorizes all fuse_get_req() invocations into two categories:
 - fuse_get_req_nopages(fc) - when caller doesn't care about req->pages
 - fuse_get_req(fc, n) - when caller need n page pointers (n > 0)

Adding fuse_get_req_nopages() helps to avoid numerous fuse_get_req(fc, 0)
scattered over code. Now it's clear from the first glance when a caller need
fuse_req with page pointers.

The patch doesn't make any logic changes. In multi-page case, it silly
allocates array of FUSE_MAX_PAGES_PER_REQ page pointers. This will be amended
by future patches.

Signed-off-by: Maxim Patlasov 
Signed-off-by: Miklos Szeredi