linux.git/fs/fs-writeback.c, branch v2.6.30

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2009-04-03T22:24:35+00:00

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits)
  trivial: Update my email address
  trivial: NULL noise: drivers/mtd/tests/mtd_*test.c
  trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h
  trivial: Fix misspelling of "Celsius".
  trivial: remove unused variable 'path' in alloc_file()
  trivial: fix a pdlfush -> pdflush typo in comment
  trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL
  trivial: wusb: Storage class should be before const qualifier
  trivial: drivers/char/bsr.c: Storage class should be before const qualifier
  trivial: h8300: Storage class should be before const qualifier
  trivial: fix where cgroup documentation is not correctly referred to
  trivial: Give the right path in Documentation example
  trivial: MTD: remove EOL from MODULE_DESCRIPTION
  trivial: Fix typo in bio_split()'s documentation
  trivial: PWM: fix of #endif comment
  trivial: fix typos/grammar errors in Kconfig texts
  trivial: Fix misspelling of firmware
  trivial: cgroups: documentation typo and spelling corrections
  trivial: Update contact info for Jochen Hein
  trivial: fix typo "resgister" -> "register"
  ...

writeback: guard against jiffies wraparound on inode->dirtied_when checks (try #3)

2009-04-03T02:04:48+00:00

The dirtied_when value on an inode is supposed to represent the first time
that an inode has one of its pages dirtied.  This value is in units of
jiffies.  It's used in several places in the writeback code to determine
when to write out an inode.

The problem is that these checks assume that dirtied_when is updated
periodically.  If an inode is continuously being used for I/O it can be
persistently marked as dirty and will continue to age.  Once the time
compared to is greater than or equal to half the maximum of the jiffies
type, the logic of the time_*() macros inverts and the opposite of what is
needed is returned.  On 32-bit architectures that's just under 25 days
(assuming HZ == 1000).

As the least-recently dirtied inode, it'll end up being the first one that
pdflush will try to write out.  sync_sb_inodes does this check:

	/* Was this inode dirtied after sync_sb_inodes was called? */
 	if (time_after(inode->dirtied_when, start))
 		break;

...but now dirtied_when appears to be in the future.  sync_sb_inodes bails
out without attempting to write any dirty inodes.  When this occurs,
pdflush will stop writing out inodes for this superblock.  Nothing can
unwedge it until jiffies moves out of the problematic window.

This patch fixes this problem by changing the checks against dirtied_when
to also check whether it appears to be in the future.  If it does, then we
consider the value to be far in the past.

This should shrink the problematic window of time to such a small period
(30s) as not to matter.

Signed-off-by: Jeff Layton 
Signed-off-by: Wu Fengguang 
Acked-by: Ian Kent 
Cc: Jens Axboe 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

vfs: skip I_CLEAR state inodes

2009-04-03T02:04:48+00:00

clear_inode() will switch inode state from I_FREEING to I_CLEAR, and do so
_outside_ of inode_lock.  So any I_FREEING testing is incomplete without a
coupled testing of I_CLEAR.

So add I_CLEAR tests to drop_pagecache_sb(), generic_sync_sb_inodes() and
add_dquot_ref().

Masayoshi MIZUMA discovered the bug in drop_pagecache_sb() and Jan Kara
reminds fixing the other two cases.

Masayoshi MIZUMA has a nice panic flow:

=====================================================================
            [process A]               |        [process B]
 |                                    |
 |    prune_icache()                  | drop_pagecache()
 |      spin_lock(&inode_lock)        |   drop_pagecache_sb()
 |      inode->i_state |= I_FREEING;  |       |
 |      spin_unlock(&inode_lock)      |       V
 |          |                         |     spin_lock(&inode_lock)
 |          V                         |         |
 |      dispose_list()                |         |
 |        list_del()                  |         |
 |        clear_inode()               |         |
 |          inode->i_state = I_CLEAR  |         |
 |            |                       |         V
 |            |                       |      if (inode->i_state & (I_FREEING|I_WILL_FREE))
 |            |                       |              continue;           <==== NOT MATCH
 |            |                       |
 |            |                       | (DANGER from here on! Accessing disposing inode!)
 |            |                       |
 |            |                       |      __iget()
 |            |                       |        list_move() <===== PANIC on poisoned list !!
 V            V                       |
(time)
=====================================================================

Reported-by: Masayoshi MIZUMA 
Reviewed-by: Jan Kara 
Signed-off-by: Wu Fengguang 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

trivial: fix a pdlfush -> pdflush typo in comment

2009-03-30T13:22:03+00:00

Signed-off-by: Masatake YAMATO 
Signed-off-by: Jiri Kosina

fs: new inode i_state corruption fix

2009-03-12T23:20:24+00:00

There was a report of a data corruption
http://lkml.org/lkml/2008/11/14/121.  There is a script included to
reproduce the problem.

During testing, I encountered a number of strange things with ext3, so I
tried ext2 to attempt to reduce complexity of the problem.  I found that
fsstress would quickly hang in wait_on_inode, waiting for I_LOCK to be
cleared, even though instrumentation showed that unlock_new_inode had
already been called for that inode.  This points to memory scribble, or
synchronisation problme.

i_state of I_NEW inodes is not protected by inode_lock because other
processes are not supposed to touch them until I_LOCK (and I_NEW) is
cleared.  Adding WARN_ON(inode->i_state & I_NEW) to sites where we modify
i_state revealed that generic_sync_sb_inodes is picking up new inodes from
the inode lists and passing them to __writeback_single_inode without
waiting for I_NEW.  Subsequently modifying i_state causes corruption.  In
my case it would look like this:

CPU0                            CPU1
unlock_new_inode()              __sync_single_inode()
 reg <- inode->i_state
 reg -> reg & ~(I_LOCK|I_NEW)   reg <- inode->i_state
 reg -> inode->i_state          reg -> reg | I_SYNC
                                reg -> inode->i_state

Non-atomic RMW on CPU1 overwrites CPU0 store and sets I_LOCK|I_NEW again.

Fix for this is rather than wait for I_NEW inodes, just skip over them:
inodes concurrently being created are not subject to data integrity
operations, and should not significantly contribute to dirty memory
either.

After this change, I'm unable to reproduce any of the added warnings or
hangs after ~1hour of running.  Previously, the new warnings would start
immediately and hang would happen in under 5 minutes.

I'm also testing on ext3 now, and so far no problems there either.  I
don't know whether this fixes the problem reported above, but it fixes a
real problem for me.

Cc: "Jorge Boncompte [DTI2]" 
Reported-by: Adrian Hunter 
Cc: Jan Kara 
Cc: 
Signed-off-by: Nick Piggin 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

fs: sys_sync fix

2009-01-06T23:59:09+00:00

s_syncing livelock avoidance was breaking data integrity guarantee of
sys_sync, by allowing sys_sync to skip writing or waiting for superblocks
if there is a concurrent sys_sync happening.

This livelock avoidance is much less important now that we don't have the
get_super_to_sync() call after every sb that we sync.  This was replaced
by __put_super_and_need_restart.

Signed-off-by: Nick Piggin 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

fs: sync_sb_inodes fix

2009-01-06T23:59:09+00:00

Fix data integrity semantics required by sys_sync, by iterating over all
inodes and waiting for any writeback pages after the initial writeout.
Comments explain the exact problem.

Signed-off-by: Nick Piggin 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

fs: remove WB_SYNC_HOLD

2009-01-06T23:59:09+00:00

Remove WB_SYNC_HOLD.  The primary motiviation is the design of my
anti-starvation code for fsync.  It requires taking an inode lock over the
sync operation, so we could run into lock ordering problems with multiple
inodes.  It is possible to take a single global lock to solve the ordering
problem, but then that would prevent a future nice implementation of "sync
multiple inodes" based on lock order via inode address.

Seems like a backward step to remove this, but actually it is busted
anyway: we can't use the inode lists for data integrity wait: an inode can
be taken off the dirty lists but still be under writeback.  In order to
satisfy data integrity semantics, we should wait for it to finish
writeback, but if we only search the dirty lists, we'll miss it.

It would be possible to have a "writeback" list, for sys_sync, I suppose.
But why complicate things by prematurely optimise?  For unmounting, we
could avoid the "livelock avoidance" code, which would be easier, but
again premature IMO.

Fixing the existing data integrity problem will come next.

Signed-off-by: Nick Piggin 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Remove Andrew Morton's old email accounts

2008-10-16T18:21:32+00:00

People can use the real name an an index into MAINTAINERS to find the
current email address.

Signed-off-by: Francois Cami 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

VFS: export sync_sb_inodes

2008-07-14T16:10:52+00:00

This patch exports the 'sync_sb_inodes()' which is needed for
UBIFS because it has to force write-back from time to time.
Namely, the UBIFS budgeting subsystem forces write-back when
its pessimistic callculations show that there is no free
space on the media.

Signed-off-by: Artem Bityutskiy