linux.git/fs/fat, branch v6.3

Merge tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2023-02-24T01:55:40+00:00

Pull non-MM updates from Andrew Morton:
 "There is no particular theme here - mainly quick hits all over the
  tree.

  Most notable is a set of zlib changes from Mikhail Zaslonko which
  enhances and fixes zlib's use of S390 hardware support: 'lib/zlib: Set
  of s390 DFLTCC related patches for kernel zlib'"

* tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (55 commits)
  Update CREDITS file entry for Jesper Juhl
  sparc: allow PM configs for sparc32 COMPILE_TEST
  hung_task: print message when hung_task_warnings gets down to zero.
  arch/Kconfig: fix indentation
  scripts/tags.sh: fix the Kconfig tags generation when using latest ctags
  nilfs2: prevent WARNING in nilfs_dat_commit_end()
  lib/zlib: remove redundation assignement of avail_in dfltcc_gdht()
  lib/Kconfig.debug: do not enable DEBUG_PREEMPT by default
  lib/zlib: DFLTCC always switch to software inflate for Z_PACKET_FLUSH option
  lib/zlib: DFLTCC support inflate with small window
  lib/zlib: Split deflate and inflate states for DFLTCC
  lib/zlib: DFLTCC not writing header bits when avail_out == 0
  lib/zlib: fix DFLTCC ignoring flush modes when avail_in == 0
  lib/zlib: fix DFLTCC not flushing EOBS when creating raw streams
  lib/zlib: implement switching between DFLTCC and software
  lib/zlib: adjust offset calculation for dfltcc_state
  nilfs2: replace WARN_ONs for invalid DAT metadata block requests
  scripts/spelling.txt: add "exsits" pattern and fix typo instances
  fs: gracefully handle ->get_block not mapping bh in __mpage_writepage
  cramfs: Kconfig: fix spelling & punctuation
  ...

Merge tag 'for-6.3/dio-2023-02-16' of git://git.kernel.dk/linux

2023-02-20T22:10:36+00:00

Pull legacy dio update from Jens Axboe:
 "We only have a few file systems that use the old dio code, make them
  select it rather than build it unconditionally"

* tag 'for-6.3/dio-2023-02-16' of git://git.kernel.dk/linux:
  fs: build the legacy direct I/O code conditionally
  fs: move sb_init_dio_done_wq out of direct-io.c

fat: fix return value of vfat_bad_char() and vfat_replace_char() functions

2023-02-03T06:50:04+00:00

These functions returns boolean value not wide character.

Link: https://lkml.kernel.org/r/20221226142512.13848-1-pali@kernel.org
Signed-off-by: Pali Rohár 
Acked-by: OGAWA Hirofumi 
Signed-off-by: Andrew Morton

fs: build the legacy direct I/O code conditionally

2023-01-26T17:30:56+00:00

Add a new LEGACY_DIRECT_IO config symbol that is only selected by the
file systems that still use the legacy blockdev_direct_IO code, so that
kernels without support for those file systems don't need to build the
code.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Jan Kara 
Reviewed-by: Eric Biggers 
Link: https://lore.kernel.org/r/20230125065839.191256-3-hch@lst.de
Signed-off-by: Jens Axboe

fs: port vfs{g,u}id helpers to mnt_idmap

2023-01-19T08:24:30+00:00

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner (Microsoft)

fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap

2023-01-19T08:24:29+00:00

Convert to struct mnt_idmap.
Remove legacy file_mnt_user_ns() and mnt_user_ns().

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner (Microsoft)

fs: port ->rename() to pass mnt_idmap

2023-01-19T08:24:26+00:00

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner (Microsoft)

fs: port ->mkdir() to pass mnt_idmap

2023-01-19T08:24:26+00:00

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner (Microsoft)

fs: port ->create() to pass mnt_idmap

2023-01-19T08:24:25+00:00

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner (Microsoft)

fs: port ->getattr() to pass mnt_idmap

2023-01-19T08:24:25+00:00

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner (Microsoft)