We had a fencepost error in the lazytime optimization which means that
timestamp would get written to the wrong inode.

Cc: stable@vger.kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Pull ext4 fixes from Ted Ts'o:
 "Some miscellaneous bug fixes and some final on-disk and ABI changes
  for ext4 encryption which provide better security and performance"

* tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix growing of tiny filesystems
  ext4: move check under lock scope to close a race.
  ext4: fix data corruption caused by unwritten and delayed extents
  ext4 crypto: remove duplicated encryption mode definitions
  ext4 crypto: do not select from EXT4_FS_ENCRYPTION
  ext4 crypto: add padding to filenames before encrypting
  ext4 crypto: simplify and speed up filename encryption

Currently it is possible to lose whole file system block worth of data
when we hit the specific interaction with unwritten and delayed extents
in status extent tree.

The problem is that when we insert delayed extent into extent status
tree the only way to get rid of it is when we write out delayed buffer.
However there is a limitation in the extent status tree implementation
so that when inserting unwritten extent should there be even a single
delayed block the whole unwritten extent would be marked as delayed.

At this point, there is no way to get rid of the delayed extents,
because there are no delayed buffers to write out. So when a we write
into said unwritten extent we will convert it to written, but it still
remains delayed.

When we try to write into that block later ext4_da_map_blocks() will set
the buffer new and delayed and map it to invalid block which causes
the rest of the block to be zeroed loosing already written data.

For now we can fix this by simply not allowing to set delayed status on
written extent in the extent status tree. Also add WARN_ON() to make
sure that we notice if this happens in the future.

This problem can be easily reproduced by running the following xfs_io.

xfs_io -f -c "pwrite -S 0xaa 4096 2048" \
          -c "falloc 0 131072" \
          -c "pwrite -S 0xbb 65536 2048" \
          -c "fsync" /mnt/test/fff

echo 3 > /proc/sys/vm/drop_caches
xfs_io -c "pwrite -S 0xdd 67584 2048" /mnt/test/fff

This can be theoretically also reproduced by at random by running fsx,
but it's not very reliable, though on machines with bigger page size
(like ppc) this can be seen more often (especially xfstest generic/127)

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

Pull fourth vfs update from Al Viro:
 "d_inode() annotations from David Howells (sat in for-next since before
  the beginning of merge window) + four assorted fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  RCU pathwalk breakage when running into a symlink overmounting something
  fix I_DIO_WAKEUP definition
  direct-io: only inc/dec inode->i_dio_count for file systems
  fs/9p: fix readdir()
  VFS: assorted d_backing_inode() annotations
  VFS: fs/inode.c helpers: d_inode() annotations
  VFS: fs/cachefiles: d_backing_inode() annotations
  VFS: fs library helpers: d_inode() annotations
  VFS: assorted weird filesystems: d_inode() annotations
  VFS: normal filesystems (and lustre): d_inode() annotations
  VFS: security/: d_inode() annotations
  VFS: security/: d_backing_inode() annotations
  VFS: net/: d_inode() annotations
  VFS: net/unix: d_backing_inode() annotations
  VFS: kernel/: d_inode() annotations
  VFS: audit: d_backing_inode() annotations
  VFS: Fix up some ->d_inode accesses in the chelsio driver
  VFS: Cachefiles should perform fs modifications on the top layer only
  VFS: AF_UNIX sockets should call mknod on the top layer only

do_blockdev_direct_IO() increments and decrements the inode
->i_dio_count for each IO operation. It does this to protect against
truncate of a file. Block devices don't need this sort of protection.

For a capable multiqueue setup, this atomic int is the only shared
state between applications accessing the device for O_DIRECT, and it
presents a scaling wall for that. In my testing, as much as 30% of
system time is spent incrementing and decrementing this value. A mixed
read/write workload improved from ~2.5M IOPS to ~9.6M IOPS, with
better latencies too. Before:

clat percentiles (usec):
 |  1.00th=[   33],  5.00th=[   34], 10.00th=[   34], 20.00th=[   34],
 | 30.00th=[   34], 40.00th=[   34], 50.00th=[   35], 60.00th=[   35],
 | 70.00th=[   35], 80.00th=[   35], 90.00th=[   37], 95.00th=[   80],
 | 99.00th=[   98], 99.50th=[  151], 99.90th=[  155], 99.95th=[  155],
 | 99.99th=[  165]

After:

clat percentiles (usec):
 |  1.00th=[   95],  5.00th=[  108], 10.00th=[  129], 20.00th=[  149],
 | 30.00th=[  155], 40.00th=[  161], 50.00th=[  167], 60.00th=[  171],
 | 70.00th=[  177], 80.00th=[  185], 90.00th=[  201], 95.00th=[  270],
 | 99.00th=[  390], 99.50th=[  398], 99.90th=[  418], 99.95th=[  422],
 | 99.99th=[  438]

In other setups, Robert Elliott reported seeing good performance
improvements:

https://lkml.org/lkml/2015/4/3/557

The more applications accessing the device, the worse it gets.

Add a new direct-io flags, DIO_SKIP_DIO_COUNT, which tells
do_blockdev_direct_IO() that it need not worry about incrementing
or decrementing the inode i_dio_count for this caller.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Elliott, Robert (Server Storage) <elliott@hp.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull ext4 updates from Ted Ts'o:
 "A few bug fixes and add support for file-system level encryption in
  ext4"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (31 commits)
  ext4 crypto: enable encryption feature flag
  ext4 crypto: add symlink encryption
  ext4 crypto: enable filename encryption
  ext4 crypto: filename encryption modifications
  ext4 crypto: partial update to namei.c for fname crypto
  ext4 crypto: insert encrypted filenames into a leaf directory block
  ext4 crypto: teach ext4_htree_store_dirent() to store decrypted filenames
  ext4 crypto: filename encryption facilities
  ext4 crypto: implement the ext4 decryption read path
  ext4 crypto: implement the ext4 encryption write path
  ext4 crypto: inherit encryption policies on inode and directory create
  ext4 crypto: enforce context consistency
  ext4 crypto: add encryption key management facilities
  ext4 crypto: add ext4 encryption facilities
  ext4 crypto: add encryption policy and password salt support
  ext4 crypto: add encryption xattr support
  ext4 crypto: export ext4_empty_dir()
  ext4 crypto: add ext4 encryption Kconfig
  ext4 crypto: reserve codepoints used by the ext4 encryption feature
  ext4 crypto: add ext4_mpage_readpages()
  ...

Pull third hunk of vfs changes from Al Viro:
 "This contains the ->direct_IO() changes from Omar + saner
  generic_write_checks() + dealing with fcntl()/{read,write}() races
  (mirroring O_APPEND/O_DIRECT into iocb->ki_flags and instead of
  repeatedly looking at ->f_flags, which can be changed by fcntl(2),
  check ->ki_flags - which cannot) + infrastructure bits for dhowells'
  d_inode annotations + Christophs switch of /dev/loop to
  vfs_iter_write()"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (30 commits)
  block: loop: switch to VFS ITER_BVEC
  configfs: Fix inconsistent use of file_inode() vs file->f_path.dentry->d_inode
  VFS: Make pathwalk use d_is_reg() rather than S_ISREG()
  VFS: Fix up debugfs to use d_is_dir() in place of S_ISDIR()
  VFS: Combine inode checks with d_is_negative() and d_is_positive() in pathwalk
  NFS: Don't use d_inode as a variable name
  VFS: Impose ordering on accesses of d_inode and d_flags
  VFS: Add owner-filesystem positive/negative dentry checks
  nfs: generic_write_checks() shouldn't be done on swapout...
  ocfs2: use __generic_file_write_iter()
  mirror O_APPEND and O_DIRECT into iocb->ki_flags
  switch generic_write_checks() to iocb and iter
  ocfs2: move generic_write_checks() before the alignment checks
  ocfs2_file_write_iter: stop messing with ppos
  udf_file_write_iter: reorder and simplify
  fuse: ->direct_IO() doesn't need generic_write_checks()
  ext4_file_write_iter: move generic_write_checks() up
  xfs_file_aio_write_checks: switch to iocb/iov_iter
  generic_write_checks(): drop isblk argument
  blkdev_write_iter: expand generic_file_checks() call in there
  ...

Signed-off-by: Uday Savagaonkar <savagaon@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

The original dax patchset split the ext2/4_file_operations because of the
two NULL splice_read/splice_write in the dax case.

In the vfs if splice_read/splice_write are NULL we then call
default_splice_read/write.

What we do here is make generic_file_splice_read aware of IS_DAX() so the
original ext2/4_file_operations can be used as is.

For write it appears that iter_file_splice_write is just fine.  It uses
the regular f_op->write(file,..) or new_sync_write(file, ...).

Signed-off-by: Boaz Harrosh <boaz@plexistor.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

that's the bulk of filesystem drivers dealing with inodes of their own

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>