linux.git/fs/ext2/inode.c, branch v4.14 Linux kernel source tree License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02T10:10:55+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2017-11-01T14:07:57+00:00 b24413180f5600bcb3bb70fbed5cf186b60864bd Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ext2: perform dax_device lookup at mount 2017-08-31T16:33:30+00:00 Dan Williams dan.j.williams@intel.com 2017-08-30T16:43:34+00:00 8cf037a8b22f71c6659bd0246bfaba9e79766f64 The ->iomap_begin() operation is a hot path, so cache the fs_dax_get_by_host() result at mount time to avoid the incurring the hash lookup overhead on a per-i/o basis. Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Reviewed-by: Jan Kara <jack@suse.cz> Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 
The ->iomap_begin() operation is a hot path, so cache the
fs_dax_get_by_host() result at mount time to avoid the incurring the
hash lookup overhead on a per-i/o basis.

Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
ext2: Fix memory leak when truncate races ext2_get_blocks 2017-07-13T11:45:08+00:00 Ernesto A. Fernández ernesto.mnd.fernandez@gmail.com 2017-06-24T00:37:21+00:00 4d9bcaddacf23861c5ee088b0c03e7034c3d59d6 Buffer heads referencing indirect blocks may not be released if the file is truncated at the right time. This happens because ext2_get_branch() returns NULL when it finds the whole chain of indirect blocks already set, and when truncate alters the chain this value of NULL is treated as the address of the last head to be released. Handle this in the same way as it's done after the got_it label. Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> 
Buffer heads referencing indirect blocks may not be released if the file
is truncated at the right time. This happens because ext2_get_branch()
returns NULL when it finds the whole chain of indirect blocks already
set, and when truncate alters the chain this value of NULL is
treated as the address of the last head to be released. Handle this in the
same way as it's done after the got_it label.

Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
dax, xfs, ext4: compile out iomap-dax paths in the FS_DAX=n case 2017-05-14T00:52:16+00:00 Dan Williams dan.j.williams@intel.com 2017-05-13T23:31:05+00:00 f5705aa8cfed142d980ecac12bee0d81b756479e Tetsuo reports: fs/built-in.o: In function `xfs_file_iomap_end': xfs_iomap.c:(.text+0xe0ef9): undefined reference to `put_dax' fs/built-in.o: In function `xfs_file_iomap_begin': xfs_iomap.c:(.text+0xe1a7f): undefined reference to `dax_get_by_host' make: *** [vmlinux] Error 1 $ grep DAX .config CONFIG_DAX=m # CONFIG_DEV_DAX is not set # CONFIG_FS_DAX is not set When FS_DAX=n we can/must throw away the dax code in filesystems. Implement 'fs_' versions of dax_get_by_host() and put_dax() that are nops in the FS_DAX=n case. Cc: <linux-xfs@vger.kernel.org> Cc: <linux-ext4@vger.kernel.org> Cc: Jan Kara <jack@suse.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Tested-by: Tony Luck <tony.luck@intel.com> Fixes: ef51042472f5 ("block, dax: move 'select DAX' from BLOCK to FS_DAX") Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 
Tetsuo reports:

  fs/built-in.o: In function `xfs_file_iomap_end':
  xfs_iomap.c:(.text+0xe0ef9): undefined reference to `put_dax'
  fs/built-in.o: In function `xfs_file_iomap_begin':
  xfs_iomap.c:(.text+0xe1a7f): undefined reference to `dax_get_by_host'
  make: *** [vmlinux] Error 1
  $ grep DAX .config
  CONFIG_DAX=m
  # CONFIG_DEV_DAX is not set
  # CONFIG_FS_DAX is not set

When FS_DAX=n we can/must throw away the dax code in filesystems.
Implement 'fs_' versions of dax_get_by_host() and put_dax() that are
nops in the FS_DAX=n case.

Cc: <linux-xfs@vger.kernel.org>
Cc: <linux-ext4@vger.kernel.org>
Cc: Jan Kara <jack@suse.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Fixes: ef51042472f5 ("block, dax: move 'select DAX' from BLOCK to FS_DAX")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Merge tag 'libnvdimm-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm 2017-05-06T01:49:20+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-05-06T01:49:20+00:00 53ef7d0e208fa38c3f63d287e0c3ab174f1e1235 Pull libnvdimm updates from Dan Williams: "The bulk of this has been in multiple -next releases. There were a few late breaking fixes and small features that got added in the last couple days, but the whole set has received a build success notification from the kbuild robot. Change summary: - Region media error reporting: A libnvdimm region device is the parent to one or more namespaces. To date, media errors have been reported via the "badblocks" attribute attached to pmem block devices for namespaces in "raw" or "memory" mode. Given that namespaces can be in "device-dax" or "btt-sector" mode this new interface reports media errors generically, i.e. independent of namespace modes or state. This subsequently allows userspace tooling to craft "ACPI 6.1 Section 9.20.7.6 Function Index 4 - Clear Uncorrectable Error" requests and submit them via the ioctl path for NVDIMM root bus devices. - Introduce 'struct dax_device' and 'struct dax_operations': Prompted by a request from Linus and feedback from Christoph this allows for dax capable drivers to publish their own custom dax operations. This fixes the broken assumption that all dax operations are related to a persistent memory device, and makes it easier for other architectures and platforms to add customized persistent memory support. - 'libnvdimm' core updates: A new "deep_flush" sysfs attribute is available for storage appliance applications to manually trigger memory controllers to drain write-pending buffers that would otherwise be flushed automatically by the platform ADR (asynchronous-DRAM-refresh) mechanism at a power loss event. Support for "locked" DIMMs is included to prevent namespaces from surfacing when the namespace label data area is locked. Finally, fixes for various reported deadlocks and crashes, also tagged for -stable. - ACPI / nfit driver updates: General updates of the nfit driver to add DSM command overrides, ACPI 6.1 health state flags support, DSM payload debug available by default, and various fixes. Acknowledgements that came after the branch was pushed: - commmit 565851c972b5 "device-dax: fix sysfs attribute deadlock": Tested-by: Yi Zhang <yizhan@redhat.com> - commit 23f498448362 "libnvdimm: rework region badblocks clearing" Tested-by: Toshi Kani <toshi.kani@hpe.com>" * tag 'libnvdimm-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (52 commits) libnvdimm, pfn: fix 'npfns' vs section alignment libnvdimm: handle locked label storage areas libnvdimm: convert NDD_ flags to use bitops, introduce NDD_LOCKED brd: fix uninitialized use of brd->dax_dev block, dax: use correct format string in bdev_dax_supported device-dax: fix sysfs attribute deadlock libnvdimm: restore "libnvdimm: band aid btt vs clear poison locking" libnvdimm: fix nvdimm_bus_lock() vs device_lock() ordering libnvdimm: rework region badblocks clearing acpi, nfit: kill ACPI_NFIT_DEBUG libnvdimm: fix clear length of nvdimm_forget_poison() libnvdimm, pmem: fix a NULL pointer BUG in nd_pmem_notify libnvdimm, region: sysfs trigger for nvdimm_flush() libnvdimm: fix phys_addr for nvdimm_clear_poison x86, dax, pmem: remove indirection around memcpy_from_pmem() block: remove block_device_operations ->direct_access() block, dax: convert bdev_dax_supported() to dax_direct_access() filesystem-dax: convert to dax_direct_access() Revert "block: use DAX for partition table reads" ext2, ext4, xfs: retrieve dax_device for iomap operations ... 
Pull libnvdimm updates from Dan Williams:
 "The bulk of this has been in multiple -next releases. There were a few
  late breaking fixes and small features that got added in the last
  couple days, but the whole set has received a build success
  notification from the kbuild robot.

  Change summary:

   - Region media error reporting: A libnvdimm region device is the
     parent to one or more namespaces. To date, media errors have been
     reported via the "badblocks" attribute attached to pmem block
     devices for namespaces in "raw" or "memory" mode. Given that
     namespaces can be in "device-dax" or "btt-sector" mode this new
     interface reports media errors generically, i.e. independent of
     namespace modes or state.

     This subsequently allows userspace tooling to craft "ACPI 6.1
     Section 9.20.7.6 Function Index 4 - Clear Uncorrectable Error"
     requests and submit them via the ioctl path for NVDIMM root bus
     devices.

   - Introduce 'struct dax_device' and 'struct dax_operations': Prompted
     by a request from Linus and feedback from Christoph this allows for
     dax capable drivers to publish their own custom dax operations.
     This fixes the broken assumption that all dax operations are
     related to a persistent memory device, and makes it easier for
     other architectures and platforms to add customized persistent
     memory support.

   - 'libnvdimm' core updates: A new "deep_flush" sysfs attribute is
     available for storage appliance applications to manually trigger
     memory controllers to drain write-pending buffers that would
     otherwise be flushed automatically by the platform ADR
     (asynchronous-DRAM-refresh) mechanism at a power loss event.
     Support for "locked" DIMMs is included to prevent namespaces from
     surfacing when the namespace label data area is locked. Finally,
     fixes for various reported deadlocks and crashes, also tagged for
     -stable.

   - ACPI / nfit driver updates: General updates of the nfit driver to
     add DSM command overrides, ACPI 6.1 health state flags support, DSM
     payload debug available by default, and various fixes.

  Acknowledgements that came after the branch was pushed:

   - commmit 565851c972b5 "device-dax: fix sysfs attribute deadlock":
     Tested-by: Yi Zhang <yizhan@redhat.com>

   - commit 23f498448362 "libnvdimm: rework region badblocks clearing"
     Tested-by: Toshi Kani <toshi.kani@hpe.com>"

* tag 'libnvdimm-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (52 commits)
  libnvdimm, pfn: fix 'npfns' vs section alignment
  libnvdimm: handle locked label storage areas
  libnvdimm: convert NDD_ flags to use bitops, introduce NDD_LOCKED
  brd: fix uninitialized use of brd->dax_dev
  block, dax: use correct format string in bdev_dax_supported
  device-dax: fix sysfs attribute deadlock
  libnvdimm: restore "libnvdimm: band aid btt vs clear poison locking"
  libnvdimm: fix nvdimm_bus_lock() vs device_lock() ordering
  libnvdimm: rework region badblocks clearing
  acpi, nfit: kill ACPI_NFIT_DEBUG
  libnvdimm: fix clear length of nvdimm_forget_poison()
  libnvdimm, pmem: fix a NULL pointer BUG in nd_pmem_notify
  libnvdimm, region: sysfs trigger for nvdimm_flush()
  libnvdimm: fix phys_addr for nvdimm_clear_poison
  x86, dax, pmem: remove indirection around memcpy_from_pmem()
  block: remove block_device_operations ->direct_access()
  block, dax: convert bdev_dax_supported() to dax_direct_access()
  filesystem-dax: convert to dax_direct_access()
  Revert "block: use DAX for partition table reads"
  ext2, ext4, xfs: retrieve dax_device for iomap operations
  ...
ext2, ext4, xfs: retrieve dax_device for iomap operations 2017-04-25T20:20:46+00:00 Dan Williams dan.j.williams@intel.com 2017-01-27T20:04:59+00:00 fa5d932c323e8e0d9b24b3517997d15b36d1607d In preparation for converting fs/dax.c to use dax_direct_access() instead of bdev_direct_access(), add the plumbing to retrieve the dax_device associated with a given block_device. Signed-off-by: Dan Williams <dan.j.williams@intel.com> 
In preparation for converting fs/dax.c to use dax_direct_access()
instead of bdev_direct_access(), add the plumbing to retrieve the
dax_device associated with a given block_device.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
ext2: Remove ext2_get_inode_flags() 2017-04-19T12:21:23+00:00 Jan Kara jack@suse.cz 2017-04-11T14:33:50+00:00 420768d31960fd4398d4553e79cab8af3db2e9ee Now that all places setting inode->i_flags that should be reflected in on-disk flags are gone, we can remove ext2_get_inode_flags() call. Reviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Jan Kara <jack@suse.cz> 
Now that all places setting inode->i_flags that should be reflected in
on-disk flags are gone, we can remove ext2_get_inode_flags() call.

Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
ext2: Call dquot_writeback_dquots() with s_umount held 2017-04-05T12:23:45+00:00 Jan Kara jack@suse.cz 2017-04-05T11:32:52+00:00 65547661500885dde26ca4a75d4d7f7df587c88e ext2_sync_fs() could be called without s_umount semaphore held when called through ext2_write_super() from __ext2_write_inode(). This function then calls dquot_writeback_dquots() which relies on s_umount to be held for protection against other quota operations. In fact __ext2_write_inode() does not need all the functionality ext2_write_super() provides. It is enough to just write the superblock. So use ext2_sync_super() instead. Fixes: 9d1ccbe70e0b14545caad12dc73adb3605447df0 Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Jan Kara <jack@suse.cz> 
ext2_sync_fs() could be called without s_umount semaphore held when
called through ext2_write_super() from __ext2_write_inode(). This
function then calls dquot_writeback_dquots() which relies on s_umount to
be held for protection against other quota operations.

In fact __ext2_write_inode() does not need all the functionality
ext2_write_super() provides. It is enough to just write the superblock.
So use ext2_sync_super() instead.

Fixes: 9d1ccbe70e0b14545caad12dc73adb3605447df0
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
iomap: constify struct iomap_ops 2017-01-31T00:32:25+00:00 Christoph Hellwig hch@lst.de 2017-01-28T07:20:26+00:00 8ff6daa17b6a64e59bbabaa116b9bd854fa4da1f Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> 
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
ext2: Return BH_New buffers for zeroed blocks 2016-12-27T04:29:24+00:00 Jan Kara jack@suse.cz 2016-08-10T14:42:53+00:00 e568df6b84ff05a22467503afc11bee7a6ba0700 So far we did not return BH_New buffers from ext2_get_blocks() when we allocated and zeroed-out a block for DAX inode to avoid racy zeroing in DAX code. This zeroing is gone these days so we can remove the workaround. Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 
So far we did not return BH_New buffers from ext2_get_blocks() when we
allocated and zeroed-out a block for DAX inode to avoid racy zeroing in
DAX code. This zeroing is gone these days so we can remove the
workaround.

Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>