linux.git/fs/exofs, branch v3.16

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2014-06-12T17:30:18+00:00

Pull vfs updates from Al Viro:
 "This the bunch that sat in -next + lock_parent() fix.  This is the
  minimal set; there's more pending stuff.

  In particular, I really hope to get acct.c fixes merged this cycle -
  we need that to deal sanely with delayed-mntput stuff.  In the next
  pile, hopefully - that series is fairly short and localized
  (kernel/acct.c, fs/super.c and fs/namespace.c).  In this pile: more
  iov_iter work.  Most of prereqs for ->splice_write with sane locking
  order are there and Kent's dio rewrite would also fit nicely on top of
  this pile"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (70 commits)
  lock_parent: don't step on stale ->d_parent of all-but-freed one
  kill generic_file_splice_write()
  ceph: switch to iter_file_splice_write()
  shmem: switch to iter_file_splice_write()
  nfs: switch to iter_splice_write_file()
  fs/splice.c: remove unneeded exports
  ocfs2: switch to iter_file_splice_write()
  ->splice_write() via ->write_iter()
  bio_vec-backed iov_iter
  optimize copy_page_{to,from}_iter()
  bury generic_file_aio_{read,write}
  lustre: get rid of messing with iovecs
  ceph: switch to ->write_iter()
  ceph_sync_direct_write: stop poking into iov_iter guts
  ceph_sync_read: stop poking into iov_iter guts
  new helper: copy_page_from_iter()
  fuse: switch to ->write_iter()
  btrfs: switch to ->write_iter()
  ocfs2: switch to ->write_iter()
  xfs: switch to ->write_iter()
  ...

->splice_write() via ->write_iter()

2014-06-12T04:18:51+00:00

iter_file_splice_write() - a ->splice_write() instance that gathers the
pipe buffers, builds a bio_vec-based iov_iter covering those and feeds
it to ->write_iter().  A bunch of simple cases coverted to that...

[AV: fixed the braino spotted by Cyrill]

Signed-off-by: Al Viro

ore: Support for raid 6

2014-05-22T11:48:15+00:00

This simple patch adds support for raid6 to the ORE.
Most operations and calculations where already for the general
case. Only things left:
* call async_gen_syndrome() in the case of raid6
  (NOTE that the raid6 math is the one supported by the Linux Kernel
   see: crypto/async_tx/async_pq.c)
* call _ore_add_parity_unit() twice with only last call generating
  the redundancy pages.

* Fix couple BUGS in old code
  a. In reads when parity==2 it can happen that per_dev->length=0
     but per_dev->offset was set and adjusted by _ore_add_sg_seg().
     Don't let it be overwritten.
  b. The all 'cur_comp > starting_dev' thing to determine if:
       "per_dev->offset is in the current stripe number or the
       next one."
     Was a complete raid5/4 accident. When parity==2 this is not
     at all true usually. All we need to do is increment si->ob_offset
     once we pass by the first parity device.
     (This also greatly simplifies the code, amen)
  c. Calculation of si->dev rotation can overflow when parity==2.

* Then last enable raid6 in ore_verify_layout()

I want to deeply thank Daniel Gryniewicz who found first all the
bugs in the old raid code, and inspired these patches:
	Inspired-by Daniel Gryniewicz 

Signed-off-by: Boaz Harrosh

ore: Remove redundant dev_order(), more cleanups

2014-05-22T11:46:15+00:00

Two cleanups:
* si->cur_comp, si->cur_pg where always calculated after
  the call to ore_calc_stripe_info() with the help of
  _dev_order(...). But these are already calculated by
  ore_calc_stripe_info() and can be just set there.
  (This is left over from the time that si->cur_comp, si->cur_pg
   were only used by raid code, but now the main loop manages
   them anyway even though they are ultimately not used in
   none raid code)

* si->cur_comp - For the very last stripe case, was set inside
  _ore_add_parity_unit(). This is not clear and will be wrong
  for coming raid6 so move this to only caller. Now si->cur_comp
  is only manipulated within _prepare_for_striping(), always next
  to the manipulation of cur_dev.
  Which is much easier to understand and follow.

Signed-off-by: Boaz Harrosh

ore: (trivial) reformat some code

2014-05-22T11:45:21+00:00

rearrange some source lines. Nothing changed.

Signed-off-by: Boaz Harrosh

write_iter variants of {__,}generic_file_aio_write()

2014-05-06T21:38:00+00:00

Signed-off-by: Al Viro

switch simple generic_file_aio_read() users to ->read_iter()

2014-05-06T21:37:55+00:00

Signed-off-by: Al Viro

pass iov_iter to ->direct_IO()

2014-05-06T21:32:44+00:00

unmodified, for now

Signed-off-by: Al Viro

Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd

2014-04-10T21:33:02+00:00

Pull exofs updates from Boaz Harrosh:
 "Trivial updates to exofs for 3.15-rc1

  Just a few fixes sent by people"

* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  MAINTAINERS: Update email address for bhalevy
  fs: Mark functions as static in exofs/ore_raid.c
  fs: Mark function as static in exofs/super.c

mm + fs: store shadow entries in page cache

2014-04-03T23:21:01+00:00

Reclaim will be leaving shadow entries in the page cache radix tree upon
evicting the real page.  As those pages are found from the LRU, an
iput() can lead to the inode being freed concurrently.  At this point,
reclaim must no longer install shadow pages because the inode freeing
code needs to ensure the page tree is really empty.

Add an address_space flag, AS_EXITING, that the inode freeing code sets
under the tree lock before doing the final truncate.  Reclaim will check
for this flag before installing shadow pages.

Signed-off-by: Johannes Weiner 
Reviewed-by: Rik van Riel 
Reviewed-by: Minchan Kim 
Cc: Andrea Arcangeli 
Cc: Bob Liu 
Cc: Christoph Hellwig 
Cc: Dave Chinner 
Cc: Greg Thelen 
Cc: Hugh Dickins 
Cc: Jan Kara 
Cc: KOSAKI Motohiro 
Cc: Luigi Semenzato 
Cc: Mel Gorman 
Cc: Metin Doslu 
Cc: Michel Lespinasse 
Cc: Ozgun Erdogan 
Cc: Peter Zijlstra 
Cc: Roman Gushchin 
Cc: Ryan Mallon 
Cc: Tejun Heo 
Cc: Vlastimil Babka 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds