<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/fs/eventpoll.c, branch v6.11</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>epoll: be better about file lifetimes</title>
<updated>2024-05-05T21:00:48+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2024-05-03T20:36:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=4efaa5acf0a1d2b5947f98abb3acf8bfd966422b'/>
<id>4efaa5acf0a1d2b5947f98abb3acf8bfd966422b</id>
<content type='text'>
epoll can call out to vfs_poll() with a file pointer that may race with
the last 'fput()'. That would make f_count go down to zero, and while
the ep-&gt;mtx locking means that the resulting file pointer tear-down will
be blocked until the poll returns, it means that f_count is already
dead, and any use of it won't actually get a reference to the file any
more: it's dead regardless.

Make sure we have a valid ref on the file pointer before we call down to
vfs_poll() from the epoll routines.

Link: https://lore.kernel.org/lkml/0000000000002d631f0615918f1e@google.com/
Reported-by: syzbot+045b454ab35fd82a35fb@syzkaller.appspotmail.com
Reviewed-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
epoll can call out to vfs_poll() with a file pointer that may race with
the last 'fput()'. That would make f_count go down to zero, and while
the ep-&gt;mtx locking means that the resulting file pointer tear-down will
be blocked until the poll returns, it means that f_count is already
dead, and any use of it won't actually get a reference to the file any
more: it's dead regardless.

Make sure we have a valid ref on the file pointer before we call down to
vfs_poll() from the epoll routines.

Link: https://lore.kernel.org/lkml/0000000000002d631f0615918f1e@google.com/
Reported-by: syzbot+045b454ab35fd82a35fb@syzkaller.appspotmail.com
Reviewed-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next</title>
<updated>2024-03-13T00:44:08+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2024-03-13T00:44:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=9187210eee7d87eea37b45ea93454a88681894a4'/>
<id>9187210eee7d87eea37b45ea93454a88681894a4</id>
<content type='text'>
Pull networking updates from Jakub Kicinski:
 "Core &amp; protocols:

   - Large effort by Eric to lower rtnl_lock pressure and remove locks:

      - Make commonly used parts of rtnetlink (address, route dumps
        etc) lockless, protected by RCU instead of rtnl_lock.

      - Add a netns exit callback which already holds rtnl_lock,
        allowing netns exit to take rtnl_lock once in the core instead
        of once for each driver / callback.

      - Remove locks / serialization in the socket diag interface.

      - Remove 6 calls to synchronize_rcu() while holding rtnl_lock.

      - Remove the dev_base_lock, depend on RCU where necessary.

   - Support busy polling on a per-epoll context basis. Poll length and
     budget parameters can be set independently of system defaults.

   - Introduce struct net_hotdata, to make sure read-mostly global
     config variables fit in as few cache lines as possible.

   - Add optional per-nexthop statistics to ease monitoring / debug of
     ECMP imbalance problems.

   - Support TCP_NOTSENT_LOWAT in MPTCP.

   - Ensure that IPv6 temporary addresses' preferred lifetimes are long
     enough, compared to other configured lifetimes, and at least 2 sec.

   - Support forwarding of ICMP Error messages in IPSec, per RFC 4301.

   - Add support for the independent control state machine for bonding
     per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
     control state machine.

   - Add "network ID" to MCTP socket APIs to support hosts with multiple
     disjoint MCTP networks.

   - Re-use the mono_delivery_time skbuff bit for packets which user
     space wants to be sent at a specified time. Maintain the timing
     information while traversing veth links, bridge etc.

   - Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.

   - Simplify many places iterating over netdevs by using an xarray
     instead of a hash table walk (hash table remains in place, for use
     on fastpaths).

   - Speed up scanning for expired routes by keeping a dedicated list.

   - Speed up "generic" XDP by trying harder to avoid large allocations.

   - Support attaching arbitrary metadata to netconsole messages.

  Things we sprinkled into general kernel code:

   - Enforce VM_IOREMAP flag and range in ioremap_page_range and
     introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
     bpf_arena).

   - Rework selftest harness to enable the use of the full range of ksft
     exit code (pass, fail, skip, xfail, xpass).

  Netfilter:

   - Allow userspace to define a table that is exclusively owned by a
     daemon (via netlink socket aliveness) without auto-removing this
     table when the userspace program exits. Such table gets marked as
     orphaned and a restarting management daemon can re-attach/regain
     ownership.

   - Speed up element insertions to nftables' concatenated-ranges set
     type. Compact a few related data structures.

  BPF:

   - Add BPF token support for delegating a subset of BPF subsystem
     functionality from privileged system-wide daemons such as systemd
     through special mount options for userns-bound BPF fs to a trusted
     &amp; unprivileged application.

   - Introduce bpf_arena which is sparse shared memory region between
     BPF program and user space where structures inside the arena can
     have pointers to other areas of the arena, and pointers work
     seamlessly for both user-space programs and BPF programs.

   - Introduce may_goto instruction that is a contract between the
     verifier and the program. The verifier allows the program to loop
     assuming it's behaving well, but reserves the right to terminate
     it.

   - Extend the BPF verifier to enable static subprog calls in spin lock
     critical sections.

   - Support registration of struct_ops types from modules which helps
     projects like fuse-bpf that seeks to implement a new struct_ops
     type.

   - Add support for retrieval of cookies for perf/kprobe multi links.

   - Support arbitrary TCP SYN cookie generation / validation in the TC
     layer with BPF to allow creating SYN flood handling in BPF
     firewalls.

   - Add code generation to inline the bpf_kptr_xchg() helper which
     improves performance when stashing/popping the allocated BPF
     objects.

  Wireless:

   - Add SPP (signaling and payload protected) AMSDU support.

   - Support wider bandwidth OFDMA, as required for EHT operation.

  Driver API:

   - Major overhaul of the Energy Efficient Ethernet internals to
     support new link modes (2.5GE, 5GE), share more code between
     drivers (especially those using phylib), and encourage more
     uniform behavior. Convert and clean up drivers.

   - Define an API for querying per netdev queue statistics from
     drivers.

   - IPSec: account in global stats for fully offloaded sessions.

   - Create a concept of Ethernet PHY Packages at the Device Tree level,
     to allow parameterizing the existing PHY package code.

   - Enable Rx hashing (RSS) on GTP protocol fields.

  Misc:

   - Improvements and refactoring all over networking selftests.

   - Create uniform module aliases for TC classifiers, actions, and
     packet schedulers to simplify creating modprobe policies.

   - Address all missing MODULE_DESCRIPTION() warnings in networking.

   - Extend the Netlink descriptions in YAML to cover message
     encapsulation or "Netlink polymorphism", where interpretation of
     nested attributes depends on link type, classifier type or some
     other "class type".

  Drivers:

   - Ethernet high-speed NICs:
      - Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
      - Intel (100G, ice, idpf):
         - support E825-C devices
      - nVidia/Mellanox:
         - support devices with one port and multiple PCIe links
      - Broadcom (bnxt):
         - support n-tuple filters
         - support configuring the RSS key
      - Wangxun (ngbe/txgbe):
         - implement irq_domain for TXGBE's sub-interrupts
      - Pensando/AMD:
         - support XDP
         - optimize queue submission and wakeup handling (+17% bps)
         - optimize struct layout, saving 28% of memory on queues

   - Ethernet NICs embedded and virtual:
      - Google cloud vNIC:
         - refactor driver to perform memory allocations for new queue
           config before stopping and freeing the old queue memory
      - Synopsys (stmmac):
         - obey queueMaxSDU and implement counters required by 802.1Qbv
      - Renesas (ravb):
         - support packet checksum offload
         - suspend to RAM and runtime PM support

   - Ethernet switches:
      - nVidia/Mellanox:
         - support for nexthop group statistics
      - Microchip:
         - ksz8: implement PHY loopback
         - add support for KSZ8567, a 7-port 10/100Mbps switch

   - PTP:
      - New driver for RENESAS FemtoClock3 Wireless clock generator.
      - Support OCP PTP cards designed and built by Adva.

   - CAN:
      - Support recvmsg() flags for own, local and remote traffic on CAN
        BCM sockets.
      - Support for esd GmbH PCIe/402 CAN device family.
      - m_can:
         - Rx/Tx submission coalescing
         - wake on frame Rx

   - WiFi:
      - Intel (iwlwifi):
         - enable signaling and payload protected A-MSDUs
         - support wider-bandwidth OFDMA
         - support for new devices
         - bump FW API to 89 for AX devices; 90 for BZ/SC devices
      - MediaTek (mt76):
         - mt7915: newer ADIE version support
         - mt7925: radio temperature sensor support
      - Qualcomm (ath11k):
         - support 6 GHz station power modes: Low Power Indoor (LPI),
           Standard Power) SP and Very Low Power (VLP)
         - QCA6390 &amp; WCN6855: support 2 concurrent station interfaces
         - QCA2066 support
      - Qualcomm (ath12k):
         - refactoring in preparation for Multi-Link Operation (MLO)
           support
         - 1024 Block Ack window size support
         - firmware-2.bin support
         - support having multiple identical PCI devices (firmware needs
           to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
         - QCN9274: support split-PHY devices
         - WCN7850: enable Power Save Mode in station mode
         - WCN7850: P2P support
      - RealTek:
         - rtw88: support for more rtw8811cu and rtw8821cu devices
         - rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
         - rtlwifi: speed up USB firmware initialization
         - rtwl8xxxu:
             - RTL8188F: concurrent interface support
             - Channel Switch Announcement (CSA) support in AP mode
      - Broadcom (brcmfmac):
         - per-vendor feature support
         - per-vendor SAE password setup
         - DMI nvram filename quirk for ACEPC W5 Pro"

* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
  nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
  nexthop: Fix out-of-bounds access during attribute validation
  nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
  nexthop: Only parse NHA_OP_FLAGS for get messages that require it
  bpf: move sleepable flag from bpf_prog_aux to bpf_prog
  bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
  selftests/bpf: Add kprobe multi triggering benchmarks
  ptp: Move from simple ida to xarray
  vxlan: Remove generic .ndo_get_stats64
  vxlan: Do not alloc tstats manually
  devlink: Add comments to use netlink gen tool
  nfp: flower: handle acti_netdevs allocation failure
  net/packet: Add getsockopt support for PACKET_COPY_THRESH
  net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
  selftests/bpf: Add bpf_arena_htab test.
  selftests/bpf: Add bpf_arena_list test.
  selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
  bpf: Add helper macro bpf_addr_space_cast()
  libbpf: Recognize __arena global variables.
  bpftool: Recognize arena map type
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull networking updates from Jakub Kicinski:
 "Core &amp; protocols:

   - Large effort by Eric to lower rtnl_lock pressure and remove locks:

      - Make commonly used parts of rtnetlink (address, route dumps
        etc) lockless, protected by RCU instead of rtnl_lock.

      - Add a netns exit callback which already holds rtnl_lock,
        allowing netns exit to take rtnl_lock once in the core instead
        of once for each driver / callback.

      - Remove locks / serialization in the socket diag interface.

      - Remove 6 calls to synchronize_rcu() while holding rtnl_lock.

      - Remove the dev_base_lock, depend on RCU where necessary.

   - Support busy polling on a per-epoll context basis. Poll length and
     budget parameters can be set independently of system defaults.

   - Introduce struct net_hotdata, to make sure read-mostly global
     config variables fit in as few cache lines as possible.

   - Add optional per-nexthop statistics to ease monitoring / debug of
     ECMP imbalance problems.

   - Support TCP_NOTSENT_LOWAT in MPTCP.

   - Ensure that IPv6 temporary addresses' preferred lifetimes are long
     enough, compared to other configured lifetimes, and at least 2 sec.

   - Support forwarding of ICMP Error messages in IPSec, per RFC 4301.

   - Add support for the independent control state machine for bonding
     per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
     control state machine.

   - Add "network ID" to MCTP socket APIs to support hosts with multiple
     disjoint MCTP networks.

   - Re-use the mono_delivery_time skbuff bit for packets which user
     space wants to be sent at a specified time. Maintain the timing
     information while traversing veth links, bridge etc.

   - Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.

   - Simplify many places iterating over netdevs by using an xarray
     instead of a hash table walk (hash table remains in place, for use
     on fastpaths).

   - Speed up scanning for expired routes by keeping a dedicated list.

   - Speed up "generic" XDP by trying harder to avoid large allocations.

   - Support attaching arbitrary metadata to netconsole messages.

  Things we sprinkled into general kernel code:

   - Enforce VM_IOREMAP flag and range in ioremap_page_range and
     introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
     bpf_arena).

   - Rework selftest harness to enable the use of the full range of ksft
     exit code (pass, fail, skip, xfail, xpass).

  Netfilter:

   - Allow userspace to define a table that is exclusively owned by a
     daemon (via netlink socket aliveness) without auto-removing this
     table when the userspace program exits. Such table gets marked as
     orphaned and a restarting management daemon can re-attach/regain
     ownership.

   - Speed up element insertions to nftables' concatenated-ranges set
     type. Compact a few related data structures.

  BPF:

   - Add BPF token support for delegating a subset of BPF subsystem
     functionality from privileged system-wide daemons such as systemd
     through special mount options for userns-bound BPF fs to a trusted
     &amp; unprivileged application.

   - Introduce bpf_arena which is sparse shared memory region between
     BPF program and user space where structures inside the arena can
     have pointers to other areas of the arena, and pointers work
     seamlessly for both user-space programs and BPF programs.

   - Introduce may_goto instruction that is a contract between the
     verifier and the program. The verifier allows the program to loop
     assuming it's behaving well, but reserves the right to terminate
     it.

   - Extend the BPF verifier to enable static subprog calls in spin lock
     critical sections.

   - Support registration of struct_ops types from modules which helps
     projects like fuse-bpf that seeks to implement a new struct_ops
     type.

   - Add support for retrieval of cookies for perf/kprobe multi links.

   - Support arbitrary TCP SYN cookie generation / validation in the TC
     layer with BPF to allow creating SYN flood handling in BPF
     firewalls.

   - Add code generation to inline the bpf_kptr_xchg() helper which
     improves performance when stashing/popping the allocated BPF
     objects.

  Wireless:

   - Add SPP (signaling and payload protected) AMSDU support.

   - Support wider bandwidth OFDMA, as required for EHT operation.

  Driver API:

   - Major overhaul of the Energy Efficient Ethernet internals to
     support new link modes (2.5GE, 5GE), share more code between
     drivers (especially those using phylib), and encourage more
     uniform behavior. Convert and clean up drivers.

   - Define an API for querying per netdev queue statistics from
     drivers.

   - IPSec: account in global stats for fully offloaded sessions.

   - Create a concept of Ethernet PHY Packages at the Device Tree level,
     to allow parameterizing the existing PHY package code.

   - Enable Rx hashing (RSS) on GTP protocol fields.

  Misc:

   - Improvements and refactoring all over networking selftests.

   - Create uniform module aliases for TC classifiers, actions, and
     packet schedulers to simplify creating modprobe policies.

   - Address all missing MODULE_DESCRIPTION() warnings in networking.

   - Extend the Netlink descriptions in YAML to cover message
     encapsulation or "Netlink polymorphism", where interpretation of
     nested attributes depends on link type, classifier type or some
     other "class type".

  Drivers:

   - Ethernet high-speed NICs:
      - Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
      - Intel (100G, ice, idpf):
         - support E825-C devices
      - nVidia/Mellanox:
         - support devices with one port and multiple PCIe links
      - Broadcom (bnxt):
         - support n-tuple filters
         - support configuring the RSS key
      - Wangxun (ngbe/txgbe):
         - implement irq_domain for TXGBE's sub-interrupts
      - Pensando/AMD:
         - support XDP
         - optimize queue submission and wakeup handling (+17% bps)
         - optimize struct layout, saving 28% of memory on queues

   - Ethernet NICs embedded and virtual:
      - Google cloud vNIC:
         - refactor driver to perform memory allocations for new queue
           config before stopping and freeing the old queue memory
      - Synopsys (stmmac):
         - obey queueMaxSDU and implement counters required by 802.1Qbv
      - Renesas (ravb):
         - support packet checksum offload
         - suspend to RAM and runtime PM support

   - Ethernet switches:
      - nVidia/Mellanox:
         - support for nexthop group statistics
      - Microchip:
         - ksz8: implement PHY loopback
         - add support for KSZ8567, a 7-port 10/100Mbps switch

   - PTP:
      - New driver for RENESAS FemtoClock3 Wireless clock generator.
      - Support OCP PTP cards designed and built by Adva.

   - CAN:
      - Support recvmsg() flags for own, local and remote traffic on CAN
        BCM sockets.
      - Support for esd GmbH PCIe/402 CAN device family.
      - m_can:
         - Rx/Tx submission coalescing
         - wake on frame Rx

   - WiFi:
      - Intel (iwlwifi):
         - enable signaling and payload protected A-MSDUs
         - support wider-bandwidth OFDMA
         - support for new devices
         - bump FW API to 89 for AX devices; 90 for BZ/SC devices
      - MediaTek (mt76):
         - mt7915: newer ADIE version support
         - mt7925: radio temperature sensor support
      - Qualcomm (ath11k):
         - support 6 GHz station power modes: Low Power Indoor (LPI),
           Standard Power) SP and Very Low Power (VLP)
         - QCA6390 &amp; WCN6855: support 2 concurrent station interfaces
         - QCA2066 support
      - Qualcomm (ath12k):
         - refactoring in preparation for Multi-Link Operation (MLO)
           support
         - 1024 Block Ack window size support
         - firmware-2.bin support
         - support having multiple identical PCI devices (firmware needs
           to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
         - QCN9274: support split-PHY devices
         - WCN7850: enable Power Save Mode in station mode
         - WCN7850: P2P support
      - RealTek:
         - rtw88: support for more rtw8811cu and rtw8821cu devices
         - rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
         - rtlwifi: speed up USB firmware initialization
         - rtwl8xxxu:
             - RTL8188F: concurrent interface support
             - Channel Switch Announcement (CSA) support in AP mode
      - Broadcom (brcmfmac):
         - per-vendor feature support
         - per-vendor SAE password setup
         - DMI nvram filename quirk for ACEPC W5 Pro"

* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
  nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
  nexthop: Fix out-of-bounds access during attribute validation
  nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
  nexthop: Only parse NHA_OP_FLAGS for get messages that require it
  bpf: move sleepable flag from bpf_prog_aux to bpf_prog
  bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
  selftests/bpf: Add kprobe multi triggering benchmarks
  ptp: Move from simple ida to xarray
  vxlan: Remove generic .ndo_get_stats64
  vxlan: Do not alloc tstats manually
  devlink: Add comments to use netlink gen tool
  nfp: flower: handle acti_netdevs allocation failure
  net/packet: Add getsockopt support for PACKET_COPY_THRESH
  net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
  selftests/bpf: Add bpf_arena_htab test.
  selftests/bpf: Add bpf_arena_list test.
  selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
  bpf: Add helper macro bpf_addr_space_cast()
  libbpf: Recognize __arena global variables.
  bpftool: Recognize arena map type
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>eventpoll: prefer kfree_rcu() in __ep_remove()</title>
<updated>2024-02-22T09:03:31+00:00</updated>
<author>
<name>Dmitry Antipov</name>
<email>dmantipov@yandex.ru</email>
</author>
<published>2024-02-21T11:22:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=0611a640e60a0473883328746f3c53934cd4dc3c'/>
<id>0611a640e60a0473883328746f3c53934cd4dc3c</id>
<content type='text'>
In '__ep_remove()', prefer 'kfree_rcu()' over 'call_rcu()' with
dummy 'epi_rcu_free()' callback. This follows commit d0089603fa7a
("fs: prefer kfree_rcu() in fasync_remove_entry()") and should not
be backported to stable as well.

Signed-off-by: Dmitry Antipov &lt;dmantipov@yandex.ru&gt;
Link: https://lore.kernel.org/r/20240221112205.48389-2-dmantipov@yandex.ru
Signed-off-by: Christian Brauner &lt;brauner@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
In '__ep_remove()', prefer 'kfree_rcu()' over 'call_rcu()' with
dummy 'epi_rcu_free()' callback. This follows commit d0089603fa7a
("fs: prefer kfree_rcu() in fasync_remove_entry()") and should not
be backported to stable as well.

Signed-off-by: Dmitry Antipov &lt;dmantipov@yandex.ru&gt;
Link: https://lore.kernel.org/r/20240221112205.48389-2-dmantipov@yandex.ru
Signed-off-by: Christian Brauner &lt;brauner@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>eventpoll: Add epoll ioctl for epoll_params</title>
<updated>2024-02-14T11:01:01+00:00</updated>
<author>
<name>Joe Damato</name>
<email>jdamato@fastly.com</email>
</author>
<published>2024-02-13T06:16:45+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=18e2bf0edf4dd88d9656ec92395aa47392e85b61'/>
<id>18e2bf0edf4dd88d9656ec92395aa47392e85b61</id>
<content type='text'>
Add an ioctl for getting and setting epoll_params. User programs can use
this ioctl to get and set the busy poll usec time, packet budget, and
prefer busy poll params for a specific epoll context.

Parameters are limited:
  - busy_poll_usecs is limited to &lt;= s32_max
  - busy_poll_budget is limited to &lt;= NAPI_POLL_WEIGHT by unprivileged
    users (!capable(CAP_NET_ADMIN))
  - prefer_busy_poll must be 0 or 1
  - __pad must be 0

Signed-off-by: Joe Damato &lt;jdamato@fastly.com&gt;
Acked-by: Stanislav Fomichev &lt;sdf@google.com&gt;
Reviewed-by: Jiri Slaby &lt;jirislaby@kernel.org&gt;
Reviewed-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add an ioctl for getting and setting epoll_params. User programs can use
this ioctl to get and set the busy poll usec time, packet budget, and
prefer busy poll params for a specific epoll context.

Parameters are limited:
  - busy_poll_usecs is limited to &lt;= s32_max
  - busy_poll_budget is limited to &lt;= NAPI_POLL_WEIGHT by unprivileged
    users (!capable(CAP_NET_ADMIN))
  - prefer_busy_poll must be 0 or 1
  - __pad must be 0

Signed-off-by: Joe Damato &lt;jdamato@fastly.com&gt;
Acked-by: Stanislav Fomichev &lt;sdf@google.com&gt;
Reviewed-by: Jiri Slaby &lt;jirislaby@kernel.org&gt;
Reviewed-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>eventpoll: Add per-epoll prefer busy poll option</title>
<updated>2024-02-14T11:01:00+00:00</updated>
<author>
<name>Joe Damato</name>
<email>jdamato@fastly.com</email>
</author>
<published>2024-02-13T06:16:44+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=de57a251082211b68e8c01e0e8210a23c022ac57'/>
<id>de57a251082211b68e8c01e0e8210a23c022ac57</id>
<content type='text'>
When using epoll-based busy poll, the prefer_busy_poll option is hardcoded
to false. Users may want to enable prefer_busy_poll to be used in
conjunction with gro_flush_timeout and defer_hard_irqs_count to keep device
IRQs masked.

Other busy poll methods allow enabling or disabling prefer busy poll via
SO_PREFER_BUSY_POLL, but epoll-based busy polling uses a hardcoded value.

Fix this edge case by adding support for a per-epoll context
prefer_busy_poll option. The default is false, as it was hardcoded before
this change.

Signed-off-by: Joe Damato &lt;jdamato@fastly.com&gt;
Acked-by: Stanislav Fomichev &lt;sdf@google.com&gt;
Reviewed-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Reviewed-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
When using epoll-based busy poll, the prefer_busy_poll option is hardcoded
to false. Users may want to enable prefer_busy_poll to be used in
conjunction with gro_flush_timeout and defer_hard_irqs_count to keep device
IRQs masked.

Other busy poll methods allow enabling or disabling prefer busy poll via
SO_PREFER_BUSY_POLL, but epoll-based busy polling uses a hardcoded value.

Fix this edge case by adding support for a per-epoll context
prefer_busy_poll option. The default is false, as it was hardcoded before
this change.

Signed-off-by: Joe Damato &lt;jdamato@fastly.com&gt;
Acked-by: Stanislav Fomichev &lt;sdf@google.com&gt;
Reviewed-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Reviewed-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>eventpoll: Add per-epoll busy poll packet budget</title>
<updated>2024-02-14T11:01:00+00:00</updated>
<author>
<name>Joe Damato</name>
<email>jdamato@fastly.com</email>
</author>
<published>2024-02-13T06:16:43+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=c6aa2a7778d8e3ba7c6f84c8095f0b89f0617830'/>
<id>c6aa2a7778d8e3ba7c6f84c8095f0b89f0617830</id>
<content type='text'>
When using epoll-based busy poll, the packet budget is hardcoded to
BUSY_POLL_BUDGET (8). Users may desire larger busy poll budgets, which
can potentially increase throughput when busy polling under high network
load.

Other busy poll methods allow setting the busy poll budget via
SO_BUSY_POLL_BUDGET, but epoll-based busy polling uses a hardcoded
value.

Fix this edge case by adding support for a per-epoll context busy poll
packet budget. If not specified, the default value (BUSY_POLL_BUDGET) is
used.

Signed-off-by: Joe Damato &lt;jdamato@fastly.com&gt;
Acked-by: Stanislav Fomichev &lt;sdf@google.com&gt;
Reviewed-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Reviewed-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
When using epoll-based busy poll, the packet budget is hardcoded to
BUSY_POLL_BUDGET (8). Users may desire larger busy poll budgets, which
can potentially increase throughput when busy polling under high network
load.

Other busy poll methods allow setting the busy poll budget via
SO_BUSY_POLL_BUDGET, but epoll-based busy polling uses a hardcoded
value.

Fix this edge case by adding support for a per-epoll context busy poll
packet budget. If not specified, the default value (BUSY_POLL_BUDGET) is
used.

Signed-off-by: Joe Damato &lt;jdamato@fastly.com&gt;
Acked-by: Stanislav Fomichev &lt;sdf@google.com&gt;
Reviewed-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Reviewed-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>eventpoll: support busy poll per epoll instance</title>
<updated>2024-02-14T11:01:00+00:00</updated>
<author>
<name>Joe Damato</name>
<email>jdamato@fastly.com</email>
</author>
<published>2024-02-13T06:16:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=85455c795c07882091b15c0613f78d4567d9be36'/>
<id>85455c795c07882091b15c0613f78d4567d9be36</id>
<content type='text'>
Allow busy polling on a per-epoll context basis. The per-epoll context
usec timeout value is preferred, but the pre-existing system wide sysctl
value is still supported if it specified.

busy_poll_usecs is a u32, but in a follow up patch the ioctl provided to
the user only allows setting a value from 0 to S32_MAX.

Signed-off-by: Joe Damato &lt;jdamato@fastly.com&gt;
Acked-by: Stanislav Fomichev &lt;sdf@google.com&gt;
Reviewed-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Allow busy polling on a per-epoll context basis. The per-epoll context
usec timeout value is preferred, but the pre-existing system wide sysctl
value is still supported if it specified.

busy_poll_usecs is a u32, but in a follow up patch the ioctl provided to
the user only allows setting a value from 0 to S32_MAX.

Signed-off-by: Joe Damato &lt;jdamato@fastly.com&gt;
Acked-by: Stanislav Fomichev &lt;sdf@google.com&gt;
Reviewed-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>epoll: Remove ep_scan_ready_list() in comments</title>
<updated>2024-02-06T12:55:33+00:00</updated>
<author>
<name>Huang Xiaojia</name>
<email>huangxiaojia2@huawei.com</email>
</author>
<published>2024-02-06T01:43:53+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=e6f7958042a7b1dc9a4dfc19fca74217bc0c4865'/>
<id>e6f7958042a7b1dc9a4dfc19fca74217bc0c4865</id>
<content type='text'>
Since commit 443f1a042233 ("lift the calls of ep_send_events_proc()
into the callers"), ep_scan_ready_list() has been removed.
But there are still several in comments. All of them should
be replaced with other caller functions.

Signed-off-by: Huang Xiaojia &lt;huangxiaojia2@huawei.com&gt;
Link: https://lore.kernel.org/r/20240206014353.4191262-1-huangxiaojia2@huawei.com
Reviewed-by: Jan Kara &lt;jack@suse.cz&gt;
Signed-off-by: Christian Brauner &lt;brauner@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Since commit 443f1a042233 ("lift the calls of ep_send_events_proc()
into the callers"), ep_scan_ready_list() has been removed.
But there are still several in comments. All of them should
be replaced with other caller functions.

Signed-off-by: Huang Xiaojia &lt;huangxiaojia2@huawei.com&gt;
Link: https://lore.kernel.org/r/20240206014353.4191262-1-huangxiaojia2@huawei.com
Reviewed-by: Jan Kara &lt;jack@suse.cz&gt;
Signed-off-by: Christian Brauner &lt;brauner@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>fs: Remove the now superfluous sentinel elements from ctl_table array</title>
<updated>2023-12-28T12:57:57+00:00</updated>
<author>
<name>Joel Granados</name>
<email>j.granados@samsung.com</email>
</author>
<published>2023-11-21T11:35:12+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=9d5b9475356635d018b4d22f7e58fce32e2e89a7'/>
<id>9d5b9475356635d018b4d22f7e58fce32e2e89a7</id>
<content type='text'>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)

Remove sentinel elements ctl_table struct. Special attention was placed in
making sure that an empty directory for fs/verity was created when
CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not defined. In this case we use the
register sysctl call that expects a size.

Signed-off-by: Joel Granados &lt;j.granados@samsung.com&gt;
Reviewed-by: Jan Kara &lt;jack@suse.cz&gt;
Reviewed-by: "Darrick J. Wong" &lt;djwong@kernel.org&gt;
Acked-by: Christian Brauner &lt;brauner@kernel.org&gt;
Signed-off-by: Luis Chamberlain &lt;mcgrof@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)

Remove sentinel elements ctl_table struct. Special attention was placed in
making sure that an empty directory for fs/verity was created when
CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not defined. In this case we use the
register sysctl call that expects a size.

Signed-off-by: Joel Granados &lt;j.granados@samsung.com&gt;
Reviewed-by: Jan Kara &lt;jack@suse.cz&gt;
Reviewed-by: "Darrick J. Wong" &lt;djwong@kernel.org&gt;
Acked-by: Christian Brauner &lt;brauner@kernel.org&gt;
Signed-off-by: Luis Chamberlain &lt;mcgrof@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>treewide: mark stuff as __ro_after_init</title>
<updated>2023-10-18T21:43:23+00:00</updated>
<author>
<name>Alexey Dobriyan</name>
<email>adobriyan@gmail.com</email>
</author>
<published>2023-10-11T16:55:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=68279f9c9f592e75d30a9ba5154a15e0a0b42ae8'/>
<id>68279f9c9f592e75d30a9ba5154a15e0a0b42ae8</id>
<content type='text'>
__read_mostly predates __ro_after_init. Many variables which are marked
__read_mostly should have been __ro_after_init from day 1.

Also, mark some stuff as "const" and "__init" while I'm at it.

[akpm@linux-foundation.org: revert sysctl_nr_open_min, sysctl_nr_open_max changes due to arm warning]
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/4f6bb9c0-abba-4ee4-a7aa-89265e886817@p183
Signed-off-by: Alexey Dobriyan &lt;adobriyan@gmail.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
__read_mostly predates __ro_after_init. Many variables which are marked
__read_mostly should have been __ro_after_init from day 1.

Also, mark some stuff as "const" and "__init" while I'm at it.

[akpm@linux-foundation.org: revert sysctl_nr_open_min, sysctl_nr_open_max changes due to arm warning]
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/4f6bb9c0-abba-4ee4-a7aa-89265e886817@p183
Signed-off-by: Alexey Dobriyan &lt;adobriyan@gmail.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
