linux.git/fs/ecryptfs/inode.c, branch v6.7

fs: Pass AT_GETATTR_NOSEC flag to getattr interface function

2023-11-18T13:54:07+00:00

When vfs_getattr_nosec() calls a filesystem's getattr interface function
then the 'nosec' should propagate into this function so that
vfs_getattr_nosec() can again be called from the filesystem's gettattr
rather than vfs_getattr(). The latter would add unnecessary security
checks that the initial vfs_getattr_nosec() call wanted to avoid.
Therefore, introduce the getattr flag GETATTR_NOSEC and allow to pass
with the new getattr_flags parameter to the getattr interface function.
In overlayfs and ecryptfs use this flag to determine which one of the
two functions to call.

In a recent code change introduced to IMA vfs_getattr_nosec() ended up
calling vfs_getattr() in overlayfs, which in turn called
security_inode_getattr() on an exiting process that did not have
current->fs set anymore, which then caused a kernel NULL pointer
dereference. With this change the call to security_inode_getattr() can
be avoided, thus avoiding the NULL pointer dereference.

Reported-by: 
Fixes: db1d1e8b9867 ("IMA: use vfs_getattr_nosec to get the i_version")
Cc: Alexander Viro 
Cc: 
Cc: Miklos Szeredi 
Cc: Amir Goldstein 
Cc: Tyler Hicks 
Cc: Mimi Zohar 
Suggested-by: Christian Brauner 
Co-developed-by: Amir Goldstein 
Signed-off-by: Stefan Berger 
Link: https://lore.kernel.org/r/20231002125733.1251467-1-stefanb@linux.vnet.ibm.com
Reviewed-by: Amir Goldstein 
Signed-off-by: Christian Brauner

ecryptfs: move ecryptfs_xattr_handlers to .rodata

2023-10-09T14:24:17+00:00

This makes it harder for accidental or malicious changes to
ecryptfs_xattr_handlers at runtime.

Cc: Tyler Hicks 
Cc: ecryptfs@vger.kernel.org
Signed-off-by: Wedson Almeida Filho 
Link: https://lore.kernel.org/r/20230930050033.41174-8-wedsonaf@gmail.com
Signed-off-by: Christian Brauner

fs: pass the request_mask to generic_fillattr

2023-08-09T06:56:36+00:00

generic_fillattr just fills in the entire stat struct indiscriminately
today, copying data from the inode. There is at least one attribute
(STATX_CHANGE_COOKIE) that can have side effects when it is reported,
and we're looking at adding more with the addition of multigrain
timestamps.

Add a request_mask argument to generic_fillattr and have most callers
just pass in the value that is passed to getattr. Have other callers
(e.g. ksmbd) just pass in STATX_BASIC_STATS. Also move the setting of
STATX_CHANGE_COOKIE into generic_fillattr.

Acked-by: Joseph Qi 
Reviewed-by: Xiubo Li 
Reviewed-by: "Paulo Alcantara (SUSE)" 
Reviewed-by: Jan Kara 
Signed-off-by: Jeff Layton 
Message-Id: <20230807-mgctime-v7-2-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner

ecryptfs: convert to ctime accessor functions

2023-07-13T08:28:06+00:00

In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.

Signed-off-by: Jeff Layton 
Reviewed-by: Jan Kara 
Message-Id: <20230705190309.579783-34-jlayton@kernel.org>
Signed-off-by: Christian Brauner

fs: drop unused posix acl handlers

2023-03-06T08:57:12+00:00

Remove struct posix_acl_{access,default}_handler for all filesystems
that don't depend on the xattr handler in their inode->i_op->listxattr()
method in any way. There's nothing more to do than to simply remove the
handler. It's been effectively unused ever since we introduced the new
posix acl api.

Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner (Microsoft)

fs: port xattr to mnt_idmap

2023-01-19T08:24:28+00:00

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner (Microsoft)

fs: port ->permission() to pass mnt_idmap

2023-01-19T08:24:28+00:00

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner (Microsoft)

fs: port ->fileattr_set() to pass mnt_idmap

2023-01-19T08:24:27+00:00

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner (Microsoft)

fs: port ->set_acl() to pass mnt_idmap

2023-01-19T08:24:27+00:00

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner (Microsoft)

fs: port ->get_acl() to pass mnt_idmap

2023-01-19T08:24:27+00:00

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Christian Brauner (Microsoft)