linux.git/fs/dlm, branch v5.13

fs: dlm: fix missing unlock on error in accept_from_sock()

2021-03-29T18:28:18+00:00

Add the missing unlock before return from accept_from_sock()
in the error handling case.

Fixes: 6cde210a9758 ("fs: dlm: add helper for init connection")
Reported-by: Hulk Robot 
Signed-off-by: Yang Yingliang 
Signed-off-by: David Teigland

fs: dlm: add shutdown hook

2021-03-09T14:56:42+00:00

This patch fixes issues which occurs when dlm lowcomms synchronize their
workqueues but dlm application layer already released the lockspace. In
such cases messages like:

dlm: gfs2: release_lockspace final free
dlm: invalid lockspace 3841231384 from 1 cmd 1 type 11

are printed on the kernel log. This patch is solving this issue by
introducing a new "shutdown" hook before calling "stop" hook when the
lockspace is going to be released finally. This should pretend any
dlm messages sitting in the workqueues during or after lockspace
removal.

It's necessary to call dlm_scand_stop() as I instrumented
dlm_lowcomms_get_buffer() code to report a warning after it's called after
dlm_midcomms_shutdown() functionality, see below:

WARNING: CPU: 1 PID: 3794 at fs/dlm/midcomms.c:1003 dlm_midcomms_get_buffer+0x167/0x180
Modules linked in: joydev iTCO_wdt intel_pmc_bxt iTCO_vendor_support drm_ttm_helper ttm pcspkr serio_raw i2c_i801 i2c_smbus drm_kms_helper virtio_scsi lpc_ich virtio_balloon virtio_console xhci_pci xhci_pci_renesas cec qemu_fw_cfg drm [last unloaded: qxl]
CPU: 1 PID: 3794 Comm: dlm_scand Tainted: G        W         5.11.0+ #26
Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014
RIP: 0010:dlm_midcomms_get_buffer+0x167/0x180
Code: 5d 41 5c 41 5d 41 5e 41 5f c3 0f 0b 45 31 e4 5b 5d 4c 89 e0 41 5c 41 5d 41 5e 41 5f c3 4c 89 e7 45 31 e4 e8 3b f1 ec ff eb 86 <0f> 0b 4c 89 e7 45 31 e4 e8 2c f1 ec ff e9 74 ff ff ff 0f 1f 80 00
RSP: 0018:ffffa81503f8fe60 EFLAGS: 00010202
RAX: 0000000000000008 RBX: ffff8f969827f200 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffffffffad1e89a0 RDI: ffff8f96a5294160
RBP: 0000000000000001 R08: 0000000000000000 R09: ffff8f96a250bc60
R10: 00000000000045d3 R11: 0000000000000000 R12: ffff8f96a250bc60
R13: ffffa81503f8fec8 R14: 0000000000000070 R15: 0000000000000c40
FS:  0000000000000000(0000) GS:ffff8f96fbc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055aa3351c000 CR3: 000000010bf22000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 dlm_scan_rsbs+0x420/0x670
 ? dlm_uevent+0x20/0x20
 dlm_scand+0xbf/0xe0
 kthread+0x13a/0x150
 ? __kthread_bind_mask+0x60/0x60
 ret_from_fork+0x22/0x30

To synchronize all dlm scand messages we stop it right before shutdown
hook.

Signed-off-by: Alexander Aring 
Signed-off-by: David Teigland

fs: dlm: flush swork on shutdown

2021-03-09T14:56:42+00:00

This patch fixes the flushing of send work before shutdown. The function
cancel_work_sync() is not the right workqueue functionality to use here
as it would cancel the work if the work queues itself. In cases of
EAGAIN in send() for dlm message we need to be sure that everything is
send out before. The function flush_work() will ensure that every send
work is be done inclusive in EAGAIN cases.

Signed-off-by: Alexander Aring 
Signed-off-by: David Teigland

fs: dlm: remove unaligned memory access handling

2021-03-09T14:56:42+00:00

This patch removes unaligned memory access handling for receiving
midcomms messages. This handling will not fix the unaligned memory
access in general. All messages should be length aligned to 8 bytes,
there exists cases where this isn't the case. It's part of the sending
handling to not send such messages. As the sending handling itself, with
the internal allocator of page buffers, can occur in unaligned memory
access of dlm message fields we just ignore that problem for now as it
seems this code is used by architecture which can handle it.

This patch adds a comment to take care about that problem in a major
bump of dlm protocol.

Signed-off-by: Alexander Aring 
Signed-off-by: David Teigland

fs: dlm: check on minimum msglen size

2021-03-09T14:56:42+00:00

This patch adds an additional check for minimum dlm header size which is
an invalid dlm message and signals a broken stream. A msglen field cannot
be less than the dlm header size because the field is inclusive header
lengths.

Signed-off-by: Alexander Aring 
Signed-off-by: David Teigland

fs: dlm: simplify writequeue handling

2021-03-09T14:56:42+00:00

This patch cleans up the current dlm sending allocator handling by using
some named macros, list functionality and removes some goto statements.

Signed-off-by: Alexander Aring 
Signed-off-by: David Teigland

fs: dlm: use GFP_ZERO for page buffer

2021-03-09T14:56:42+00:00

This patch uses GFP_ZERO for allocate a page for the internal dlm
sending buffer allocator instead of calling memset zero after every
allocation. An already allocated space will never be reused again.

Signed-off-by: Alexander Aring 
Signed-off-by: David Teigland

fs: dlm: change allocation limits

2021-03-09T14:56:42+00:00

While running tcpkill I experienced invalid header length values while
receiving to check that a node doesn't try to send a invalid dlm message
we also check on applications minimum allocation limit. Also use
DEFAULT_BUFFER_SIZE as maximum allocation limit. The define
LOWCOMMS_MAX_TX_BUFFER_LEN is to calculate maximum buffer limits on
application layer, future midcomms layer will subtract their needs from
this define.

Signed-off-by: Alexander Aring 
Signed-off-by: David Teigland

fs: dlm: add check if dlm is currently running

2021-03-09T14:56:42+00:00

This patch adds checks for dlm config attributes regarding to protocol
parameters as it makes only sense to change them when dlm is not running.
It also adds a check for valid protocol specifiers and return invalid
argument if they are not supported.

Signed-off-by: Alexander Aring 
Signed-off-by: David Teigland

fs: dlm: add errno handling to check callback

2021-03-09T14:56:42+00:00

This allows to return individual errno values for the config attribute
check callback instead of returning invalid argument only.

Signed-off-by: Alexander Aring 
Signed-off-by: David Teigland