linux.git/fs/dlm/lockspace.c, branch v5.15

fs: dlm: avoid comms shutdown delay in release_lockspace

2021-09-01T16:29:14+00:00

When dlm_release_lockspace does active shutdown on connections to
other nodes, the active shutdown will wait for any exisitng passive
shutdowns to be resolved.  But, the sequence of operations during
dlm_release_lockspace can prevent the normal resolution of passive
shutdowns (processed normally by way of lockspace recovery.)
This disruption of passive shutdown handling can cause the active
shutdown to wait for a full timeout period, delaying the completion
of dlm_release_lockspace.

To fix this, make dlm_release_lockspace resolve existing passive
shutdowns (by calling dlm_clear_members earlier), before it does
active shutdowns.  The active shutdowns will not find any passive
shutdowns to wait for, and will not be delayed.

Reported-by: Chris Mackowski 
Signed-off-by: Alexander Aring 
Signed-off-by: David Teigland

fs: dlm: use READ_ONCE for config var

2021-07-19T16:53:43+00:00

This patch will use READ_ONCE to signal the compiler to read this
variable only one time. If we don't do that it could be that the
compiler read this value more than one time, because some optimizations,
from the configure data which might can be changed during this time.

Signed-off-by: Alexander Aring 
Signed-off-by: David Teigland

fs: dlm: rename socket and app buffer defines

2021-06-02T16:53:04+00:00

This patch renames DEFAULT_BUFFER_SIZE to DLM_MAX_SOCKET_BUFSIZE and
LOWCOMMS_MAX_TX_BUFFER_LEN to DLM_MAX_APP_BUFSIZE as they are proper
names to define what's behind those values. The DLM_MAX_SOCKET_BUFSIZE
defines the maximum size of buffer which can be handled on socket layer,
the DLM_MAX_APP_BUFSIZE defines the maximum size of buffer which can be
handled by the DLM application layer.

Signed-off-by: Alexander Aring 
Signed-off-by: David Teigland

fs: dlm: add reliable connection if reconnect

2021-05-25T14:22:20+00:00

This patch introduce to make a tcp lowcomms connection reliable even if
reconnects occurs. This is done by an application layer re-transmission
handling and sequence numbers in dlm protocols. There are three new dlm
commands:

DLM_OPTS:

This will encapsulate an existing dlm message (and rcom message if they
don't have an own application side re-transmission handling). As optional
handling additional tlv's (type length fields) can be appended. This can
be for example a sequence number field. However because in DLM_OPTS the
lockspace field is unused and a sequence number is a mandatory field it
isn't made as a tlv and we put the sequence number inside the lockspace
id. The possibility to add optional options are still there for future
purposes.

DLM_ACK:

Just a dlm header to acknowledge the receive of a DLM_OPTS message to
it's sender.

DLM_FIN:

This provides a 4 way handshake for connection termination inclusive
support for half-closed connections. It's provided on application layer
because SCTP doesn't support half-closed sockets, the shutdown() call
can interrupted by e.g. TCP resets itself and a hard logic to implement
it because the othercon paradigm in lowcomms. The 4-way termination
handshake also solve problems to synchronize peer EOF arrival and that
the cluster manager removes the peer in the node membership handling of
DLM. In some cases messages can be still transmitted in this time and we
need to wait for the node membership event.

To provide a reliable connection the node will retransmit all
unacknowledges message to it's peer on reconnect. The receiver will then
filtering out the next received message and drop all messages which are
duplicates.

As RCOM_STATUS and RCOM_NAMES messages are the first messages which are
exchanged and they have they own re-transmission handling, there exists
logic that these messages must be first. If these messages arrives we
store the dlm version field. This handling is on DLM 3.1 and after this
patch 3.2 the same. A backwards compatibility handling has been added
which seems to work on tests without tcpkill, however it's not recommended
to use DLM 3.1 and 3.2 at the same time, because DLM 3.2 tries to fix long
term bugs in the DLM protocol.

Signed-off-by: Alexander Aring 
Signed-off-by: David Teigland

fs: dlm: add more midcomms hooks

2021-05-25T14:22:20+00:00

This patch prepares hooks to redirect to the midcomms layer which will
be used by the midcomms re-transmit handling.

There exists the new concept of stateless buffers allocation and
commits. This can be used to bypass the midcomms re-transmit handling. It
is used by RCOM_STATUS and RCOM_NAMES messages, because they have their
own ping-like re-transmit handling. As well these two messages will be
used to determine the DLM version per node, because these two messages
are per observation the first messages which are exchanged.

Cluster manager events for node membership are added to add support for
half-closed connections in cases that the peer connection get to
an end of file but DLM still holds membership of the node. In
this time DLM can still trigger new message which we should allow. After
the cluster manager node removal event occurs it safe to close the
connection.

Signed-off-by: Alexander Aring 
Signed-off-by: David Teigland

fs: dlm: add shutdown hook

2021-03-09T14:56:42+00:00

This patch fixes issues which occurs when dlm lowcomms synchronize their
workqueues but dlm application layer already released the lockspace. In
such cases messages like:

dlm: gfs2: release_lockspace final free
dlm: invalid lockspace 3841231384 from 1 cmd 1 type 11

are printed on the kernel log. This patch is solving this issue by
introducing a new "shutdown" hook before calling "stop" hook when the
lockspace is going to be released finally. This should pretend any
dlm messages sitting in the workqueues during or after lockspace
removal.

It's necessary to call dlm_scand_stop() as I instrumented
dlm_lowcomms_get_buffer() code to report a warning after it's called after
dlm_midcomms_shutdown() functionality, see below:

WARNING: CPU: 1 PID: 3794 at fs/dlm/midcomms.c:1003 dlm_midcomms_get_buffer+0x167/0x180
Modules linked in: joydev iTCO_wdt intel_pmc_bxt iTCO_vendor_support drm_ttm_helper ttm pcspkr serio_raw i2c_i801 i2c_smbus drm_kms_helper virtio_scsi lpc_ich virtio_balloon virtio_console xhci_pci xhci_pci_renesas cec qemu_fw_cfg drm [last unloaded: qxl]
CPU: 1 PID: 3794 Comm: dlm_scand Tainted: G        W         5.11.0+ #26
Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014
RIP: 0010:dlm_midcomms_get_buffer+0x167/0x180
Code: 5d 41 5c 41 5d 41 5e 41 5f c3 0f 0b 45 31 e4 5b 5d 4c 89 e0 41 5c 41 5d 41 5e 41 5f c3 4c 89 e7 45 31 e4 e8 3b f1 ec ff eb 86 <0f> 0b 4c 89 e7 45 31 e4 e8 2c f1 ec ff e9 74 ff ff ff 0f 1f 80 00
RSP: 0018:ffffa81503f8fe60 EFLAGS: 00010202
RAX: 0000000000000008 RBX: ffff8f969827f200 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffffffffad1e89a0 RDI: ffff8f96a5294160
RBP: 0000000000000001 R08: 0000000000000000 R09: ffff8f96a250bc60
R10: 00000000000045d3 R11: 0000000000000000 R12: ffff8f96a250bc60
R13: ffffa81503f8fec8 R14: 0000000000000070 R15: 0000000000000c40
FS:  0000000000000000(0000) GS:ffff8f96fbc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055aa3351c000 CR3: 000000010bf22000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 dlm_scan_rsbs+0x420/0x670
 ? dlm_uevent+0x20/0x20
 dlm_scand+0xbf/0xe0
 kthread+0x13a/0x150
 ? __kthread_bind_mask+0x60/0x60
 ret_from_fork+0x22/0x30

To synchronize all dlm scand messages we stop it right before shutdown
hook.

Signed-off-by: Alexander Aring 
Signed-off-by: David Teigland

fs: dlm: define max send buffer

2020-11-10T18:14:20+00:00

This patch will set the maximum transmit buffer size for rcom messages
with "names" to 4096 bytes. It's a leftover change of
commit 4798cbbfbd00 ("fs: dlm: rework receive handling"). Fact is that we
cannot allocate a contiguous transmit buffer length above of 4096 bytes.
It seems at some places the upper layer protocol will calculate according
to dlm_config.ci_buffer_size the possible payload of a dlm recovery
message. As compiler setting we will use now the maximum possible
message which dlm can send out. Commit 4e192ee68e5af ("fs: dlm: disallow
buffer size below default") disallow a buffer setting smaller than the
4096 bytes and above 4096 bytes is definitely wrong because we will then
write out of buffer space as we cannot allocate a contiguous buffer above
4096 bytes. The ci_buffer_size is still there to define the possible
maximum receive buffer size of a recvmsg() which should be at least the
maximum possible dlm message size.

Signed-off-by: Alexander Aring 
Signed-off-by: David Teigland

dlm: Fix kobject memleak

2020-08-06T15:30:49+00:00

Currently the error return path from kobject_init_and_add() is not
followed by a call to kobject_put() - which means we are leaking
the kobject.

Set do_unreg = 1 before kobject_init_and_add() to ensure that
kobject_put() can be called in its error patch.

Fixes: 901195ed7f4b ("Kobject: change GFS2 to use kobject_init_and_add")
Reported-by: Hulk Robot 
Signed-off-by: Wang Hai 
Signed-off-by: David Teigland

dlm: Switch to using wait_event()

2020-05-12T19:06:17+00:00

We saw an issue in a production server on a customer deployment where
DLM 4.0.7 gets "stuck" and unable to join new lockspaces.

There is no useful response for the dlm in do_event() if
wait_event_interruptible() is interrupted, so switch to
wait_event().

Signed-off-by: Ross Lagerwall 
Signed-off-by: David Teigland

dlm: Replace default_attrs in dlm_ktype with default_groups

2019-06-13T11:50:22+00:00

The kobj_type default_attrs field is being replaced by the
default_groups field, so replace the default_attrs field in dlm_ktype
with default_groups. Use the ATTRIBUTE_GROUPS macro to create
dlm_groups.

Signed-off-by: Kimberly Brown 
Signed-off-by: Greg Kroah-Hartman