<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/fs/dcache.c, branch v2.6.23</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>mm: Remove slab destructors from kmem_cache_create().</title>
<updated>2007-07-20T01:11:58+00:00</updated>
<author>
<name>Paul Mundt</name>
<email>lethal@linux-sh.org</email>
</author>
<published>2007-07-20T01:11:58+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=20c2df83d25c6a95affe6157a4c9cac4cf5ffaac'/>
<id>20c2df83d25c6a95affe6157a4c9cac4cf5ffaac</id>
<content type='text'>
Slab destructors were no longer supported after Christoph's
c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).

Signed-off-by: Paul Mundt &lt;lethal@linux-sh.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Slab destructors were no longer supported after Christoph's
c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).

Signed-off-by: Paul Mundt &lt;lethal@linux-sh.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mm: clean up and kernelify shrinker registration</title>
<updated>2007-07-17T17:23:00+00:00</updated>
<author>
<name>Rusty Russell</name>
<email>rusty@rustcorp.com.au</email>
</author>
<published>2007-07-17T11:03:17+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=8e1f936b73150f5095448a0fee6d4f30a1f9001d'/>
<id>8e1f936b73150f5095448a0fee6d4f30a1f9001d</id>
<content type='text'>
I can never remember what the function to register to receive VM pressure
is called.  I have to trace down from __alloc_pages() to find it.

It's called "set_shrinker()", and it needs Your Help.

1) Don't hide struct shrinker.  It contains no magic.
2) Don't allocate "struct shrinker".  It's not helpful.
3) Call them "register_shrinker" and "unregister_shrinker".
4) Call the function "shrink" not "shrinker".
5) Reduce the 17 lines of waffly comments to 13, but document it properly.

Signed-off-by: Rusty Russell &lt;rusty@rustcorp.com.au&gt;
Cc: David Chinner &lt;dgc@sgi.com&gt;
Cc: Trond Myklebust &lt;trond.myklebust@fys.uio.no&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
I can never remember what the function to register to receive VM pressure
is called.  I have to trace down from __alloc_pages() to find it.

It's called "set_shrinker()", and it needs Your Help.

1) Don't hide struct shrinker.  It contains no magic.
2) Don't allocate "struct shrinker".  It's not helpful.
3) Call them "register_shrinker" and "unregister_shrinker".
4) Call the function "shrink" not "shrinker".
5) Reduce the 17 lines of waffly comments to 13, but document it properly.

Signed-off-by: Rusty Russell &lt;rusty@rustcorp.com.au&gt;
Cc: David Chinner &lt;dgc@sgi.com&gt;
Cc: Trond Myklebust &lt;trond.myklebust@fys.uio.no&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>header cleaning: don't include smp_lock.h when not used</title>
<updated>2007-05-08T18:15:07+00:00</updated>
<author>
<name>Randy Dunlap</name>
<email>randy.dunlap@oracle.com</email>
</author>
<published>2007-05-08T07:28:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=e63340ae6b6205fef26b40a75673d1c9c0c8bb90'/>
<id>e63340ae6b6205fef26b40a75673d1c9c0c8bb90</id>
<content type='text'>
Remove includes of &lt;linux/smp_lock.h&gt; where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap &lt;randy.dunlap@oracle.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Remove includes of &lt;linux/smp_lock.h&gt; where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap &lt;randy.dunlap@oracle.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>VFS: delay the dentry name generation on sockets and pipes</title>
<updated>2007-05-08T18:15:03+00:00</updated>
<author>
<name>Eric Dumazet</name>
<email>dada1@cosmosbay.com</email>
</author>
<published>2007-05-08T07:26:18+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=c23fbb6bcb3eb9cdf39a103edadf57bde8ce309c'/>
<id>c23fbb6bcb3eb9cdf39a103edadf57bde8ce309c</id>
<content type='text'>
1) Introduces a new method in 'struct dentry_operations'.  This method
   called d_dname() might be called from d_path() to build a pathname for
   special filesystems.  It is called without locks.

   Future patches (if we succeed in having one common dentry for all
   pipes/sockets) may need to change prototype of this method, but we now
   use : char *d_dname(struct dentry *dentry, char *buffer, int buflen);

2) Adds a dynamic_dname() helper function that eases d_dname() implementations

3) Defines d_dname method for sockets : No more sprintf() at socket
   creation.  This is delayed up to the moment someone does an access to
   /proc/pid/fd/...

4) Defines d_dname method for pipes : No more sprintf() at pipe
   creation.  This is delayed up to the moment someone does an access to
   /proc/pid/fd/...

A benchmark consisting of 1.000.000 calls to pipe()/close()/close() gives a
*nice* speedup on my Pentium(M) 1.6 Ghz :

3.090 s instead of 3.450 s

Signed-off-by: Eric Dumazet &lt;dada1@cosmosbay.com&gt;
Acked-by: Christoph Hellwig &lt;hch@infradead.org&gt;
Acked-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
1) Introduces a new method in 'struct dentry_operations'.  This method
   called d_dname() might be called from d_path() to build a pathname for
   special filesystems.  It is called without locks.

   Future patches (if we succeed in having one common dentry for all
   pipes/sockets) may need to change prototype of this method, but we now
   use : char *d_dname(struct dentry *dentry, char *buffer, int buflen);

2) Adds a dynamic_dname() helper function that eases d_dname() implementations

3) Defines d_dname method for sockets : No more sprintf() at socket
   creation.  This is delayed up to the moment someone does an access to
   /proc/pid/fd/...

4) Defines d_dname method for pipes : No more sprintf() at pipe
   creation.  This is delayed up to the moment someone does an access to
   /proc/pid/fd/...

A benchmark consisting of 1.000.000 calls to pipe()/close()/close() gives a
*nice* speedup on my Pentium(M) 1.6 Ghz :

3.090 s instead of 3.450 s

Signed-off-by: Eric Dumazet &lt;dada1@cosmosbay.com&gt;
Acked-by: Christoph Hellwig &lt;hch@infradead.org&gt;
Acked-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mm: shrink parent dentries when shrinking slab</title>
<updated>2007-05-08T18:14:58+00:00</updated>
<author>
<name>Andrew Morton</name>
<email>akpm@linux-foundation.org</email>
</author>
<published>2007-05-08T07:23:49+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=24c32d733dd44dbc5b9dcd0b8de58e16fdbeac76'/>
<id>24c32d733dd44dbc5b9dcd0b8de58e16fdbeac76</id>
<content type='text'>
Teach the dentry slab shrinker to aggressively shrink parent dentries when
shrinking the dentry cache.

This is done to attempt to improve the situation where the dentry slab cache
gets a lot of internal fragmentation due to pages containing directory
dentries.  It is expected that this change will cause some of those dentries
to be reaped earlier, and with less scanning.

Needs careful testing.

Cc: Miklos Szeredi &lt;mszeredi@suse.cz&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Teach the dentry slab shrinker to aggressively shrink parent dentries when
shrinking the dentry cache.

This is done to attempt to improve the situation where the dentry slab cache
gets a lot of internal fragmentation due to pages containing directory
dentries.  It is expected that this change will cause some of those dentries
to be reaped earlier, and with less scanning.

Needs careful testing.

Cc: Miklos Szeredi &lt;mszeredi@suse.cz&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>fix quadratic behavior of shrink_dcache_parent()</title>
<updated>2007-05-08T18:14:58+00:00</updated>
<author>
<name>Miklos Szeredi</name>
<email>mszeredi@suse.cz</email>
</author>
<published>2007-05-08T07:23:46+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=d52b908646b88cb1952ab8c9b2d4423908a23f11'/>
<id>d52b908646b88cb1952ab8c9b2d4423908a23f11</id>
<content type='text'>
The time shrink_dcache_parent() takes, grows quadratically with the depth
of the tree under 'parent'.  This starts to get noticable at about 10,000.

These kinds of depths don't occur normally, and filesystems which invoke
shrink_dcache_parent() via d_invalidate() seem to have other depth
dependent timings, so it's not even easy to expose this problem.

However with FUSE it's easy to create a deep tree and d_invalidate()
will also get called.  This can make a syscall hang for a very long
time.

This is the original discovery of the problem by Russ Cox:

  http://article.gmane.org/gmane.comp.file-systems.fuse.devel/3826

The following patch fixes the quadratic behavior, by optionally allowing
prune_dcache() to prune ancestors of a dentry in one go, instead of doing
it one at a time.

Common code in dput() and prune_one_dentry() is extracted into a new helper
function d_kill().

shrink_dcache_parent() as well as shrink_dcache_sb() are converted to use
the ancestry-pruner option.  Only for shrink_dcache_memory() is this
behavior not desirable, so it keeps using the old algorithm.

Signed-off-by: Miklos Szeredi &lt;mszeredi@suse.cz&gt;
Cc: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
Cc: Maneesh Soni &lt;maneesh@in.ibm.com&gt;
Acked-by: "Paul E. McKenney" &lt;paulmck@us.ibm.com&gt;
Cc: Dipankar Sarma &lt;dipankar@in.ibm.com&gt;
Cc: Neil Brown &lt;neilb@suse.de&gt;
Cc: Trond Myklebust &lt;trond.myklebust@fys.uio.no&gt;
Cc: Christoph Hellwig &lt;hch@lst.de&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The time shrink_dcache_parent() takes, grows quadratically with the depth
of the tree under 'parent'.  This starts to get noticable at about 10,000.

These kinds of depths don't occur normally, and filesystems which invoke
shrink_dcache_parent() via d_invalidate() seem to have other depth
dependent timings, so it's not even easy to expose this problem.

However with FUSE it's easy to create a deep tree and d_invalidate()
will also get called.  This can make a syscall hang for a very long
time.

This is the original discovery of the problem by Russ Cox:

  http://article.gmane.org/gmane.comp.file-systems.fuse.devel/3826

The following patch fixes the quadratic behavior, by optionally allowing
prune_dcache() to prune ancestors of a dentry in one go, instead of doing
it one at a time.

Common code in dput() and prune_one_dentry() is extracted into a new helper
function d_kill().

shrink_dcache_parent() as well as shrink_dcache_sb() are converted to use
the ancestry-pruner option.  Only for shrink_dcache_memory() is this
behavior not desirable, so it keeps using the old algorithm.

Signed-off-by: Miklos Szeredi &lt;mszeredi@suse.cz&gt;
Cc: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
Cc: Maneesh Soni &lt;maneesh@in.ibm.com&gt;
Acked-by: "Paul E. McKenney" &lt;paulmck@us.ibm.com&gt;
Cc: Dipankar Sarma &lt;dipankar@in.ibm.com&gt;
Cc: Neil Brown &lt;neilb@suse.de&gt;
Cc: Trond Myklebust &lt;trond.myklebust@fys.uio.no&gt;
Cc: Christoph Hellwig &lt;hch@lst.de&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>KMEM_CACHE(): simplify slab cache creation</title>
<updated>2007-05-07T19:12:55+00:00</updated>
<author>
<name>Christoph Lameter</name>
<email>clameter@sgi.com</email>
</author>
<published>2007-05-06T21:49:57+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=0a31bd5f2bbb6473ef9d24f0063ca91cfa678b64'/>
<id>0a31bd5f2bbb6473ef9d24f0063ca91cfa678b64</id>
<content type='text'>
This patch provides a new macro

KMEM_CACHE(&lt;struct&gt;, &lt;flags&gt;)

to simplify slab creation. KMEM_CACHE creates a slab with the name of the
struct, with the size of the struct and with the alignment of the struct.
Additional slab flags may be specified if necessary.

Example

struct test_slab {
	int a,b,c;
	struct list_head;
} __cacheline_aligned_in_smp;

test_slab_cache = KMEM_CACHE(test_slab, SLAB_PANIC)

will create a new slab named "test_slab" of the size sizeof(struct
test_slab) and aligned to the alignment of test slab.  If it fails then we
panic.

Signed-off-by: Christoph Lameter &lt;clameter@sgi.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This patch provides a new macro

KMEM_CACHE(&lt;struct&gt;, &lt;flags&gt;)

to simplify slab creation. KMEM_CACHE creates a slab with the name of the
struct, with the size of the struct and with the alignment of the struct.
Additional slab flags may be specified if necessary.

Example

struct test_slab {
	int a,b,c;
	struct list_head;
} __cacheline_aligned_in_smp;

test_slab_cache = KMEM_CACHE(test_slab, SLAB_PANIC)

will create a new slab named "test_slab" of the size sizeof(struct
test_slab) and aligned to the alignment of test slab.  If it fails then we
panic.

Signed-off-by: Christoph Lameter &lt;clameter@sgi.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Revert "[PATCH] Fix d_path for lazy unmounts"</title>
<updated>2007-02-13T20:08:18+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@woody.linux-foundation.org</email>
</author>
<published>2007-02-13T20:08:18+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=552ce544edfbe9bce79952a8c0f8d65b7f2d16bb'/>
<id>552ce544edfbe9bce79952a8c0f8d65b7f2d16bb</id>
<content type='text'>
This reverts commit eb3dfb0cb1f4a44e2d0553f89514ce9f2a9fcaf1.

It causes some strange Gnome problem with dbus-daemon getting stuck, so
we'll revert it until that problem is understood.

Reported by both walt and Greg KH, who both independently git-bisected
the problem to this commit.

Andreas is looking at it.

Reported-by: walt &lt;wa1ter@myrealbox.com&gt;
Reported-by: Greg KH &lt;greg@kroah.com&gt;
Acked-by: Andreas Gruenbacher &lt;agruen@suse.de&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This reverts commit eb3dfb0cb1f4a44e2d0553f89514ce9f2a9fcaf1.

It causes some strange Gnome problem with dbus-daemon getting stuck, so
we'll revert it until that problem is understood.

Reported by both walt and Greg KH, who both independently git-bisected
the problem to this commit.

Andreas is looking at it.

Reported-by: walt &lt;wa1ter@myrealbox.com&gt;
Reported-by: Greg KH &lt;greg@kroah.com&gt;
Acked-by: Andreas Gruenbacher &lt;agruen@suse.de&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>[PATCH] Fix d_path for lazy unmounts</title>
<updated>2007-02-12T17:48:27+00:00</updated>
<author>
<name>Andreas Gruenbacher</name>
<email>agruen@suse.de</email>
</author>
<published>2007-02-12T08:51:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=eb3dfb0cb1f4a44e2d0553f89514ce9f2a9fcaf1'/>
<id>eb3dfb0cb1f4a44e2d0553f89514ce9f2a9fcaf1</id>
<content type='text'>
Here is a bugfix to d_path.

First, when d_path() hits a lazily unmounted mount point, it tries to
prepend the name of the lazily unmounted dentry to the path name.  It gets
this wrong, and also overwrites the slash that separates the name from the
following pathname component.  This is demonstrated by the attached test
case, which prints "getcwd returned d_path-bugsubdir" with the bug.  The
correct result would be "getcwd returned d_path-bug/subdir".

It could be argued that the name of the root dentry should not be part of
the result of d_path in the first place.  On the other hand, what the
unconnected namespace was once reachable as may provide some useful hints
to users, and so that seems okay.

Second, it isn't always possible to tell from the __d_path result whether
the specified root and rootmnt (i.e., the chroot) was reached: lazy
unmounts of bind mounts will produce a path that does start with a
non-slash so we can tell from that, but other lazy unmounts will produce a
path that starts with a slash, just like "ordinary" paths.

The attached patch cleans up __d_path() to fix the bug with overlapping
pathname components.  It also adds a @fail_deleted argument, which allows
to get rid of some of the mess in sys_getcwd().  Grabbing the dcache_lock
can then also be moved into __d_path().  The patch also makes sure that
paths will only start with a slash for paths which are connected to the
root and rootmnt.

The @fail_deleted argument could be added to d_path() as well: this would
allow callers to recognize deleted files, without having to resort to the
ambiguous check for the " (deleted)" string at the end of the pathnames.
This is not currently done, but it might be worthwhile.

Signed-off-by: Andreas Gruenbacher &lt;agruen@suse.de&gt;
Cc: Neil Brown &lt;neilb@suse.de&gt;
Cc: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
Cc: Christoph Hellwig &lt;hch@lst.de&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Here is a bugfix to d_path.

First, when d_path() hits a lazily unmounted mount point, it tries to
prepend the name of the lazily unmounted dentry to the path name.  It gets
this wrong, and also overwrites the slash that separates the name from the
following pathname component.  This is demonstrated by the attached test
case, which prints "getcwd returned d_path-bugsubdir" with the bug.  The
correct result would be "getcwd returned d_path-bug/subdir".

It could be argued that the name of the root dentry should not be part of
the result of d_path in the first place.  On the other hand, what the
unconnected namespace was once reachable as may provide some useful hints
to users, and so that seems okay.

Second, it isn't always possible to tell from the __d_path result whether
the specified root and rootmnt (i.e., the chroot) was reached: lazy
unmounts of bind mounts will produce a path that does start with a
non-slash so we can tell from that, but other lazy unmounts will produce a
path that starts with a slash, just like "ordinary" paths.

The attached patch cleans up __d_path() to fix the bug with overlapping
pathname components.  It also adds a @fail_deleted argument, which allows
to get rid of some of the mess in sys_getcwd().  Grabbing the dcache_lock
can then also be moved into __d_path().  The patch also makes sure that
paths will only start with a slash for paths which are connected to the
root and rootmnt.

The @fail_deleted argument could be added to d_path() as well: this would
allow callers to recognize deleted files, without having to resort to the
ambiguous check for the " (deleted)" string at the end of the pathnames.
This is not currently done, but it might be worthwhile.

Signed-off-by: Andreas Gruenbacher &lt;agruen@suse.de&gt;
Cc: Neil Brown &lt;neilb@suse.de&gt;
Cc: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
Cc: Christoph Hellwig &lt;hch@lst.de&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>[PATCH] dcache: avoid RCU for never-hashed dentries</title>
<updated>2006-12-07T16:39:41+00:00</updated>
<author>
<name>Eric Dumazet</name>
<email>dada1@cosmosbay.com</email>
</author>
<published>2006-12-07T04:38:48+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=b3423415fbc2e5461605826317da1c8dbbf21f97'/>
<id>b3423415fbc2e5461605826317da1c8dbbf21f97</id>
<content type='text'>
Some dentries don't need to be globally visible in dentry hashtable.
(pipes &amp; sockets)

Such dentries dont need to wait for a RCU grace period at delete time.
Being able to free them permits a better CPU cache use (hot cache)

This patch combined with (dont insert pipe dentries into dentry_hashtable)
reduced time of { pipe(p); close(p[0]); close(p[1]);} on my UP machine (1.6
GHz Pentium-M) from 3.23 us to 2.86 us (But this patch does not depend on
other patches, only bench results)

Signed-off-by: Eric Dumazet &lt;dada1@cosmosbay.com&gt;
Cc: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
Cc: Maneesh Soni &lt;maneesh@in.ibm.com&gt;
Cc: "Paul E. McKenney" &lt;paulmck@us.ibm.com&gt;
Cc: Dipankar Sarma &lt;dipankar@in.ibm.com&gt;
Acked-by: David Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Andrew Morton &lt;akpm@osdl.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@osdl.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Some dentries don't need to be globally visible in dentry hashtable.
(pipes &amp; sockets)

Such dentries dont need to wait for a RCU grace period at delete time.
Being able to free them permits a better CPU cache use (hot cache)

This patch combined with (dont insert pipe dentries into dentry_hashtable)
reduced time of { pipe(p); close(p[0]); close(p[1]);} on my UP machine (1.6
GHz Pentium-M) from 3.23 us to 2.86 us (But this patch does not depend on
other patches, only bench results)

Signed-off-by: Eric Dumazet &lt;dada1@cosmosbay.com&gt;
Cc: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
Cc: Maneesh Soni &lt;maneesh@in.ibm.com&gt;
Cc: "Paul E. McKenney" &lt;paulmck@us.ibm.com&gt;
Cc: Dipankar Sarma &lt;dipankar@in.ibm.com&gt;
Acked-by: David Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Andrew Morton &lt;akpm@osdl.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@osdl.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
