linux.git/fs/configfs, branch v4.8

configfs: Return -EFBIG from configfs_write_bin_file.

2016-09-16T10:58:28+00:00

The check for writing more than cb_max_size bytes does not 'goto out' so
it is a no-op which allows users to vmalloc an arbitrary amount.

Fixes: 03607ace807b ("configfs: implement binary attributes")
Cc: stable@kernel.org
Signed-off-by: Phil Turnbull 
Signed-off-by: Christoph Hellwig

configfs: don't set buffer_needs_fill to zero if show() returns error

2016-07-10T12:02:18+00:00

A confgifs attribute's show() callback is called once the first time
the user attempts to read from it. If it returns an error, that
error is returned to the user. However, the open file's
buffer_needs_fill is still set to zero and consecutive read() calls
will find an empty buffer that doesn't need filling and return 0 to
the user. This could give the user the wrong impression that the
attribute was read successfully.

Fix this by not setting buffer_needs_fill if show() returns an error,
making consecutive read() calls call show() again and either get an
error again or get data.

Signed-off-by: Tal Shorer 
Signed-off-by: Christoph Hellwig

configfs: Remove ppos increment in configfs_write_bin_file

2016-06-30T09:28:55+00:00

The simple_write_to_buffer() already increments the @ppos on success,
see fs/libfs.c simple_write_to_buffer() comment:

"
On success, the number of bytes written is returned and the offset @ppos
advanced by this number, or negative value is returned on error.
"

If the configfs_write_bin_file() is invoked with @count smaller than the
total length of the written binary file, it will be invoked multiple times.
Since configfs_write_bin_file() increments @ppos on success, after calling
simple_write_to_buffer(), the @ppos is incremented twice.

Subsequent invocation of configfs_write_bin_file() will result in the next
piece of data being written to the offset twice as long as the length of
the previous write, thus creating buffer with "holes" in it.

The simple testcase using DTO follows:
  $ mkdir /sys/kernel/config/device-tree/overlays/1
  $ dd bs=1 if=foo.dtbo of=/sys/kernel/config/device-tree/overlays/1/dtbo
Without this patch, the testcase will result in twice as big buffer in the
kernel, which is then passed to the cfs_overlay_item_dtbo_write() .

Signed-off-by: Marek Vasut 
Cc: Geert Uytterhoeven 
Cc: Christoph Hellwig 
Cc: Pantelis Antoniou

configfs_readdir(): make safe under shared lock

2016-05-09T15:41:13+00:00

Signed-off-by: Al Viro

parallel lookups: actual switch to rwsem

2016-05-02T23:49:28+00:00

ta-da!

The main issue is the lack of down_write_killable(), so the places
like readdir.c switched to plain inode_lock(); once killable
variants of rwsem primitives appear, that'll be dealt with.

lockdep side also might need more work

Signed-off-by: Al Viro

configfs_detach_prep(): make sure that wait_mutex won't go away

2016-05-02T23:47:22+00:00

grab a reference to dentry we'd got the sucker from, and return
that dentry via *wait, rather than just returning the address of
->i_mutex.

Signed-off-by: Al Viro

mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros

2016-04-04T17:41:08+00:00

PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 -  << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> ;

 -  >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> ;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov 
Acked-by: Michal Hocko 
Signed-off-by: Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2016-03-20T01:52:29+00:00

Pull vfs updates from Al Viro:

 - Preparations of parallel lookups (the remaining main obstacle is the
   need to move security_d_instantiate(); once that becomes safe, the
   rest will be a matter of rather short series local to fs/*.c

 - preadv2/pwritev2 series from Christoph

 - assorted fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits)
  splice: handle zero nr_pages in splice_to_pipe()
  vfs: show_vfsstat: do not ignore errors from show_devname method
  dcache.c: new helper: __d_add()
  don't bother with __d_instantiate(dentry, NULL)
  untangle fsnotify_d_instantiate() a bit
  uninline d_add()
  replace d_add_unique() with saner primitive
  quota: use lookup_one_len_unlocked()
  cifs_get_root(): use lookup_one_len_unlocked()
  nfs_lookup: don't bother with d_instantiate(dentry, NULL)
  kill dentry_unhash()
  ceph_fill_trace(): don't bother with d_instantiate(dn, NULL)
  autofs4: don't bother with d_instantiate(dentry, NULL) in ->lookup()
  configfs: move d_rehash() into configfs_create() for regular files
  ceph: don't bother with d_rehash() in splice_dentry()
  namei: teach lookup_slow() to skip revalidate
  namei: massage lookup_slow() to be usable by lookup_one_len_unlocked()
  lookup_one_len_unlocked(): use lookup_dcache()
  namei: simplify invalidation logics in lookup_dcache()
  namei: change calling conventions for lookup_{fast,slow} and follow_managed()
  ...

configfs: move d_rehash() into configfs_create() for regular files

2016-03-14T04:15:55+00:00

... and turn it into d_add in there

Signed-off-by: Al Viro

configfs: switch ->default groups to a linked list

2016-03-06T15:11:24+00:00

Replace the current NULL-terminated array of default groups with a linked
list.  This gets rid of lots of nasty code to size and/or dynamically
allocate the array.

While we're at it also provide a conveniant helper to remove the default
groups.

Signed-off-by: Christoph Hellwig 
Acked-by: Felipe Balbi 		[drivers/usb/gadget]
Acked-by: Joel Becker 
Acked-by: Nicholas Bellinger 
Reviewed-by: Sagi Grimberg