The HCIUARTGETDEVICE, HCIUARTSETFLAGS and HCIUARTGETFLAGS ioctl are
missing the COMPATIBLE_IOCTL declaration.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>

Pull misc vfs updates from Al Viro:
 "All kinds of stuff.  That probably should've been 5 or 6 separate
  branches, but by the time I'd realized how large and mixed that bag
  had become it had been too close to -final to play with rebasing.

  Some fs/namei.c cleanups there, memdup_user_nul() introduction and
  switching open-coded instances, burying long-dead code, whack-a-mole
  of various kinds, several new helpers for ->llseek(), assorted
  cleanups and fixes from various people, etc.

  One piece probably deserves special mention - Neil's
  lookup_one_len_unlocked().  Similar to lookup_one_len(), but gets
  called without ->i_mutex and tries to avoid ever taking it.  That, of
  course, means that it's not useful for any directory modifications,
  but things like getting inode attributes in nfds readdirplus are fine
  with that.  I really should've asked for moratorium on lookup-related
  changes this cycle, but since I hadn't done that early enough...  I
  *am* asking for that for the coming cycle, though - I'm going to try
  and get conversion of i_mutex to rwsem with ->lookup() done under lock
  taken shared.

  There will be a patch closer to the end of the window, along the lines
  of the one Linus had posted last May - mechanical conversion of
  ->i_mutex accesses to inode_lock()/inode_unlock()/inode_trylock()/
  inode_is_locked()/inode_lock_nested().  To quote Linus back then:

    -----
    |    This is an automated patch using
    |
    |        sed 's/mutex_lock(&\(.*\)->i_mutex)/inode_lock(\1)/'
    |        sed 's/mutex_unlock(&\(.*\)->i_mutex)/inode_unlock(\1)/'
    |        sed 's/mutex_lock_nested(&\(.*\)->i_mutex,[     ]*I_MUTEX_\([A-Z0-9_]*\))/inode_lock_nested(\1, I_MUTEX_\2)/'
    |        sed 's/mutex_is_locked(&\(.*\)->i_mutex)/inode_is_locked(\1)/'
    |        sed 's/mutex_trylock(&\(.*\)->i_mutex)/inode_trylock(\1)/'
    |
    |    with a very few manual fixups
    -----

  I'm going to send that once the ->i_mutex-affecting stuff in -next
  gets mostly merged (or when Linus says he's about to stop taking
  merges)"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  nfsd: don't hold i_mutex over userspace upcalls
  fs:affs:Replace time_t with time64_t
  fs/9p: use fscache mutex rather than spinlock
  proc: add a reschedule point in proc_readfd_common()
  logfs: constify logfs_block_ops structures
  fcntl: allow to set O_DIRECT flag on pipe
  fs: __generic_file_splice_read retry lookup on AOP_TRUNCATED_PAGE
  fs: xattr: Use kvfree()
  [s390] page_to_phys() always returns a multiple of PAGE_SIZE
  nbd: use ->compat_ioctl()
  fs: use block_device name vsprintf helper
  lib/vsprintf: add %*pg format specifier
  fs: use gendisk->disk_name where possible
  poll: plug an unused argument to do_poll
  amdkfd: don't open-code memdup_user()
  cdrom: don't open-code memdup_user()
  rsxx: don't open-code memdup_user()
  mtip32xx: don't open-code memdup_user()
  [um] mconsole: don't open-code memdup_user_nul()
  [um] hostaudio: don't open-code memdup_user()
  ...

Pull vfs copy_file_range updates from Al Viro:
 "Several series around copy_file_range/CLONE"

* 'work.copy_file_range' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  btrfs: use new dedupe data function pointer
  vfs: hoist the btrfs deduplication ioctl to the vfs
  vfs: wire up compat ioctl for CLONE/CLONE_RANGE
  cifs: avoid unused variable and label
  nfsd: implement the NFSv4.2 CLONE operation
  nfsd: Pass filehandle to nfs4_preprocess_stateid_op()
  vfs: pull btrfs clone API to vfs layer
  locks: new locks_mandatory_area calling convention
  vfs: Add vfs_copy_file_range() support for pagecache copies
  btrfs: add .copy_file_range file operation
  x86: add sys_copy_file_range to syscall tables
  vfs: add copy_file_range syscall and vfs helper

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

This replaces all code in fs/compat_ioctl.c that translated
ioctl arguments into a in-kernel structure, then performed
do_ioctl under set_fs(KERNEL_DS), with code that allocates
data on the user stack and can call the VFS ioctl handler
under USER_DS.

This is done as a hardening measure because the caller
does not know what kind of ioctl handler will be invoked,
only that no corresponding compat_ioctl handler exists and
what the ioctl command number is. The accidental
invocation of an unlocked_ioctl handler that unexpectedly
calls copy_to_user could be a severe security issue.

Signed-off-by: Jann Horn <jann@thejh.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

In code in fs/compat_ioctl.c that translates ioctl arguments
into a in-kernel structure, then performs sys_ioctl, possibly
under set_fs(KERNEL_DS), this commit changes the sys_ioctl
calls to do_ioctl calls. do_ioctl is a new function that does
the same thing as sys_ioctl, but doesn't look up the fd again.

This change is made to avoid (potential) security issues
because of ioctl handlers that accept one of the ioctl
commands I2C_FUNCS, VIDEO_GET_EVENT, MTIOCPOS, MTIOCGET,
TIOCGSERIAL, TIOCSSERIAL, RTC_IRQP_READ, RTC_EPOCH_READ.
This can happen for multiple reasons:

 - The ioctl command number could be reused.
 - The ioctl handler might not check the full ioctl
   command. This is e.g. true for drm_ioctl.
 - The ioctl handler is very special, e.g. cuse_file_ioctl

The real issue is that set_fs(KERNEL_DS) is used here,
but that's fixed in a separate commit
"compat_ioctl: don't call do_ioctl under set_fs(KERNEL_DS)".

This change mitigates potential security issues by
preventing a race that permits invocation of
unlocked_ioctl handlers under KERNEL_DS through compat
code even if a corresponding compat_ioctl handler exists.

So far, no way has been identified to use this to damage
kernel memory without having CAP_SYS_ADMIN in the init ns
(with the capability, doing reads/writes at arbitrary
kernel addresses should be easy through CUSE's ioctl
handler with FUSE_IOCTL_UNRESTRICTED set).

[AV: two missed sys_ioctl() taken care of]

Signed-off-by: Jann Horn <jann@thejh.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Hoist the btrfs EXTENT_SAME ioctl up to the VFS and make the name
more systematic (FIDEDUPERANGE).

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The ioctl is named I2C_RDWR for "I2C read/write". But references to it
were misspelled "rdrw". Fix them.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>