linux.git/fs/ceph, branch v6.5-rc2

Merge tag 'ceph-for-6.5-rc1' of https://github.com/ceph/ceph-client

2023-07-07T22:07:20+00:00

Pull ceph updates from Ilya Dryomov:
 "A bunch of CephFS fixups from Xiubo, mostly around dropping caps,
  along with a fix for a regression in the readahead handling code which
  sneaked in with the switch to netfs helpers"

* tag 'ceph-for-6.5-rc1' of https://github.com/ceph/ceph-client:
  ceph: don't let check_caps skip sending responses for revoke msgs
  ceph: issue a cap release immediately if no cap exists
  ceph: trigger to flush the buffer when making snapshot
  ceph: fix blindly expanding the readahead windows
  ceph: add a dedicated private data for netfs rreq
  ceph: voluntarily drop Xx caps for requests those touch parent mtime
  ceph: try to dump the msgs when decoding fails
  ceph: only send metrics when the MDS rank is ready

ceph: don't let check_caps skip sending responses for revoke msgs

2023-06-30T10:08:55+00:00

If a client sends out a cap update dropping caps with the prior 'seq'
just before an incoming cap revoke request, then the client may drop
the revoke because it believes it's already released the requested
capabilities.

This causes the MDS to wait indefinitely for the client to respond
to the revoke. It's therefore always a good idea to ack the cap
revoke request with the bumped up 'seq'.

Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/61782
Signed-off-by: Xiubo Li 
Reviewed-by: Milind Changire 
Reviewed-by: Patrick Donnelly 
Signed-off-by: Ilya Dryomov

ceph: issue a cap release immediately if no cap exists

2023-06-30T10:08:55+00:00

In case:

           mds                             client
                                - Releases cap and put Inode
  - Increase cap->seq and sends
    revokes req to the client
  - Receives release req and    - Receives & drops the revoke req
    skip removing the cap and
    then eval the CInode and
    issue or revoke caps again.
                                - Receives & drops the caps update
                                  or revoke req
  - Health warning for client
    isn't responding to
    mclientcaps(revoke)

All the IMPORT/REVOKE/GRANT cap ops will increase the session seq
in MDS side and then the client need to issue a cap release to
unblock MDS to remove the corresponding cap to unblock possible
waiters.

Link: https://tracker.ceph.com/issues/61332
Signed-off-by: Xiubo Li 
Reviewed-by: Milind Changire 
Signed-off-by: Ilya Dryomov

ceph: trigger to flush the buffer when making snapshot

2023-06-30T10:08:55+00:00

The 'i_wr_ref' is used to track the 'Fb' caps, while whenever the 'Fb'
caps is took the kclient will always take the 'Fw' caps at the same
time. That means it will always be a false check in __ceph_finish_cap_snap().

When writing to buffer the kclient will take both 'Fb|Fw' caps and then
write the contents to the buffer pages by increasing the 'i_wrbuffer_ref'
and then just release both 'Fb|Fw'. This is different with the user
space libcephfs, which will keep the 'Fb' being took and use 'i_wr_ref'
instead of 'i_wrbuffer_ref' to track this until the buffer is flushed
to Rados.

We need to defer flushing the capsnap until the corresponding buffer
pages are all flushed to Rados, and at the same time just trigger to
flush the buffer pages immediately.

Link: https://tracker.ceph.com/issues/48640
Link: https://tracker.ceph.com/issues/59343
Signed-off-by: Xiubo Li 
Reviewed-by: Milind Changire 
Signed-off-by: Ilya Dryomov

ceph: fix blindly expanding the readahead windows

2023-06-30T10:08:55+00:00

Blindly expanding the readahead windows will cause unneccessary
pagecache thrashing and also will introduce the network workload.
We should disable expanding the windows if the readahead is disabled
and also shouldn't expand the windows too much.

Expanding forward firstly instead of expanding backward for possible
sequential reads.

Bound `rreq->len` to the actual file size to restore the previous page
cache usage.

The posix_fadvise may change the maximum size of a file readahead.

Cc: stable@vger.kernel.org
Fixes: 49870056005c ("ceph: convert ceph_readpages to ceph_readahead")
Link: https://lore.kernel.org/ceph-devel/20230504082510.247-1-sehuww@mail.scut.edu.cn
Link: https://www.spinics.net/lists/ceph-users/msg76183.html
Signed-off-by: Xiubo Li 
Reviewed-and-tested-by: Hu Weiwen 
Reviewed-by: Milind Changire 
Signed-off-by: Ilya Dryomov

ceph: add a dedicated private data for netfs rreq

2023-06-30T10:08:55+00:00

We need to save the 'f_ra.ra_pages' to expand the readahead window
later.

Cc: stable@vger.kernel.org
Fixes: 49870056005c ("ceph: convert ceph_readpages to ceph_readahead")
Link: https://lore.kernel.org/ceph-devel/20230504082510.247-1-sehuww@mail.scut.edu.cn
Link: https://www.spinics.net/lists/ceph-users/msg76183.html
Signed-off-by: Xiubo Li 
Reviewed-and-tested-by: Hu Weiwen 
Reviewed-by: Milind Changire 
Signed-off-by: Ilya Dryomov

ceph: voluntarily drop Xx caps for requests those touch parent mtime

2023-06-30T10:08:55+00:00

For write requests the parent's mtime will be updated correspondingly.
And if the 'Xx' caps is issued and when releasing other caps together
with the write requests the MDS Locker will try to eval the xattr lock,
which need to change the locker state excl --> sync and need to do Xx
caps revocation.

Just voluntarily dropping CEPH_CAP_XATTR_EXCL caps to avoid a cap
revoke message, which could cause the mtime will be overwrote by stale
one.

[ idryomov: break unnecessarily long lines ]

Link: https://tracker.ceph.com/issues/61584
Signed-off-by: Xiubo Li 
Reviewed-by: Milind Changire 
Signed-off-by: Ilya Dryomov

ceph: try to dump the msgs when decoding fails

2023-06-30T10:08:54+00:00

When the msgs are corrupted we need to dump them and then it will
be easier to dig what has happened and where the issue is.

Signed-off-by: Xiubo Li 
Reviewed-by: Milind Changire 
Signed-off-by: Ilya Dryomov

ceph: only send metrics when the MDS rank is ready

2023-06-30T10:08:54+00:00

When the MDS rank is in clientreplay state, the metrics requests
will be discarded directly. Also, when there are a lot of known
client requests to recover from, the metrics requests will slow
down the MDS rank from getting to the active state sooner.

With this patch, we will send the metrics requests only when the
MDS rank is in active state.

Link: https://tracker.ceph.com/issues/61524
Signed-off-by: Xiubo Li 
Reviewed-by: Milind Changire 
Signed-off-by: Ilya Dryomov

Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2023-06-28T17:28:11+00:00

Pull mm updates from Andrew Morton:

 - Yosry Ahmed brought back some cgroup v1 stats in OOM logs

 - Yosry has also eliminated cgroup's atomic rstat flushing

 - Nhat Pham adds the new cachestat() syscall. It provides userspace
   with the ability to query pagecache status - a similar concept to
   mincore() but more powerful and with improved usability

 - Mel Gorman provides more optimizations for compaction, reducing the
   prevalence of page rescanning

 - Lorenzo Stoakes has done some maintanance work on the
   get_user_pages() interface

 - Liam Howlett continues with cleanups and maintenance work to the
   maple tree code. Peng Zhang also does some work on maple tree

 - Johannes Weiner has done some cleanup work on the compaction code

 - David Hildenbrand has contributed additional selftests for
   get_user_pages()

 - Thomas Gleixner has contributed some maintenance and optimization
   work for the vmalloc code

 - Baolin Wang has provided some compaction cleanups,

 - SeongJae Park continues maintenance work on the DAMON code

 - Huang Ying has done some maintenance on the swap code's usage of
   device refcounting

 - Christoph Hellwig has some cleanups for the filemap/directio code

 - Ryan Roberts provides two patch series which yield some
   rationalization of the kernel's access to pte entries - use the
   provided APIs rather than open-coding accesses

 - Lorenzo Stoakes has some fixes to the interaction between pagecache
   and directio access to file mappings

 - John Hubbard has a series of fixes to the MM selftesting code

 - ZhangPeng continues the folio conversion campaign

 - Hugh Dickins has been working on the pagetable handling code, mainly
   with a view to reducing the load on the mmap_lock

 - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
   from 128 to 8

 - Domenico Cerasuolo has improved the zswap reclaim mechanism by
   reorganizing the LRU management

 - Matthew Wilcox provides some fixups to make gfs2 work better with the
   buffer_head code

 - Vishal Moola also has done some folio conversion work

 - Matthew Wilcox has removed the remnants of the pagevec code - their
   functionality is migrated over to struct folio_batch

* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
  mm/hugetlb: remove hugetlb_set_page_subpool()
  mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
  hugetlb: revert use of page_cache_next_miss()
  Revert "page cache: fix page_cache_next/prev_miss off by one"
  mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
  mm: memcg: rename and document global_reclaim()
  mm: kill [add|del]_page_to_lru_list()
  mm: compaction: convert to use a folio in isolate_migratepages_block()
  mm: zswap: fix double invalidate with exclusive loads
  mm: remove unnecessary pagevec includes
  mm: remove references to pagevec
  mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
  mm: remove struct pagevec
  net: convert sunrpc from pagevec to folio_batch
  i915: convert i915_gpu_error to use a folio_batch
  pagevec: rename fbatch_count()
  mm: remove check_move_unevictable_pages()
  drm: convert drm_gem_put_pages() to use a folio_batch
  i915: convert shmem_sg_free_table() to use a folio_batch
  scatterlist: add sg_set_folio()
  ...