linux.git/fs/ceph/super.c, branch v4.18

ceph: show ino32 if the value is different with default

2018-06-04T18:46:02+00:00

In current ceph_show_options(), there is no item for showing 'ino32',
so add showing mount option 'ino32' if the value is different with
default.

Signed-off-by: Chengguang Xu 
Reviewed-by: Ilya Dryomov 
Signed-off-by: Ilya Dryomov

ceph: strengthen rsize/wsize/readdir_max_bytes validation

2018-06-04T18:46:01+00:00

The check (intval < PAGE_SIZE) will involve type cast, so even when
specifying negative value to rsize/wsize/readdir_max_bytes, it will
pass the validation check successfully.

Signed-off-by: Chengguang Xu 
Reviewed-by: Ilya Dryomov 
Signed-off-by: Ilya Dryomov

ceph: fix alignment of rasize

2018-06-04T18:46:01+00:00

On currently logic:
when I specify rasize=0~1 then it will be 4096.
when I specify rasize=2~4097 then it will be 8192.

Make it the same as rsize & wsize.

Signed-off-by: Chengguang Xu 
Reviewed-by: "Yan, Zheng" 
Signed-off-by: Ilya Dryomov

ceph: fix use-after-free in ceph_statfs()

2018-06-04T18:46:01+00:00

KASAN found an UAF in ceph_statfs.  This was a one-off bug but looking at
the code it looks like the monmap access needs to be protected as it can
be modified while we're accessing it.  Fix this by protecting the access
with the monc->mutex.

  BUG: KASAN: use-after-free in ceph_statfs+0x21d/0x2c0
  Read of size 8 at addr ffff88006844f2e0 by task trinity-c5/304

  CPU: 0 PID: 304 Comm: trinity-c5 Not tainted 4.17.0-rc6+ #172
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
  Call Trace:
   dump_stack+0xa5/0x11b
   ? show_regs_print_info+0x5/0x5
   ? kmsg_dump_rewind+0x118/0x118
   ? ceph_statfs+0x21d/0x2c0
   print_address_description+0x73/0x2b0
   ? ceph_statfs+0x21d/0x2c0
   kasan_report+0x243/0x360
   ceph_statfs+0x21d/0x2c0
   ? ceph_umount_begin+0x80/0x80
   ? kmem_cache_alloc+0xdf/0x1a0
   statfs_by_dentry+0x79/0xb0
   vfs_statfs+0x28/0x110
   user_statfs+0x8c/0xe0
   ? vfs_statfs+0x110/0x110
   ? __fdget_raw+0x10/0x10
   __se_sys_statfs+0x5d/0xa0
   ? user_statfs+0xe0/0xe0
   ? mutex_unlock+0x1d/0x40
   ? __x64_sys_statfs+0x20/0x30
   do_syscall_64+0xee/0x290
   ? syscall_return_slowpath+0x1c0/0x1c0
   ? page_fault+0x1e/0x30
   ? syscall_return_slowpath+0x13c/0x1c0
   ? prepare_exit_to_usermode+0xdb/0x140
   ? syscall_trace_enter+0x330/0x330
   ? __put_user_4+0x1c/0x30
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

  Allocated by task 130:
   __kmalloc+0x124/0x210
   ceph_monmap_decode+0x1c1/0x400
   dispatch+0x113/0xd20
   ceph_con_workfn+0xa7e/0x44e0
   process_one_work+0x5f0/0xa30
   worker_thread+0x184/0xa70
   kthread+0x1a0/0x1c0
   ret_from_fork+0x35/0x40

  Freed by task 130:
   kfree+0xb8/0x210
   dispatch+0x15a/0xd20
   ceph_con_workfn+0xa7e/0x44e0
   process_one_work+0x5f0/0xa30
   worker_thread+0x184/0xa70
   kthread+0x1a0/0x1c0
   ret_from_fork+0x35/0x40

Signed-off-by: Luis Henriques 
Reviewed-by: "Yan, Zheng" 
Signed-off-by: Ilya Dryomov

libceph: make abort_on_full a per-osdc setting

2018-06-04T18:46:00+00:00

The intent behind making it a per-request setting was that it would be
set for writes, but not for reads.  As it is, the flag is set for all
fs/ceph requests except for pool perm check stat request (technically
a read).

ceph_osdc_abort_on_full() skips reads since the previous commit and
I don't see a use case for marking individual requests.

Signed-off-by: Ilya Dryomov 
Acked-by: Jeff Layton 
Reviewed-by: "Yan, Zheng"

ceph: flush pending works before shutdown super

2018-06-04T18:45:57+00:00

Pending works hold inode references, which cause "Busy inodes after
unmount" warning.

Signed-off-by: "Yan, Zheng" 
Signed-off-by: Ilya Dryomov

ceph: abort osd requests on force umount

2018-06-04T18:45:57+00:00

This avoid force umount waiting on page writeback:

  io_schedule+0xd/0x30
  wait_on_page_bit_common+0xc6/0x130
  __filemap_fdatawait_range+0xbd/0x100
  filemap_fdatawait_keep_errors+0x15/0x40
  sync_inodes_sb+0x1cf/0x240
  sync_filesystem+0x52/0x90
  generic_shutdown_super+0x1d/0x110
  ceph_kill_sb+0x28/0x80 [ceph]
  deactivate_locked_super+0x35/0x60
  cleanup_mnt+0x36/0x70
  task_work_run+0x79/0xa0
  exit_to_usermode_loop+0x62/0x70
  do_syscall_64+0xdb/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  0xffffffffffffffff

Signed-off-by: "Yan, Zheng" 
Signed-off-by: Ilya Dryomov

ceph: show wsize only if non-default

2018-06-04T18:45:56+00:00

This is how it was before commit 95cca2b44e54 ("ceph: limit osd write
size") went in.

Signed-off-by: Ilya Dryomov

ceph: quota: report root dir quota usage in statfs

2018-04-02T09:17:53+00:00

This commit changes statfs default behaviour when reporting usage
statistics.  Instead of using the overall filesystem usage, statfs now
reports the quota for the filesystem root, if ceph.quota.max_bytes has
been set for this inode.  If quota hasn't been set, it falls back to the
old statfs behaviour.

A new mount option is also added ('noquotadf') to disable this behaviour.

Signed-off-by: Luis Henriques 
Reviewed-by: "Yan, Zheng" 
Signed-off-by: Ilya Dryomov

ceph: optimize memory usage

2018-04-02T08:12:49+00:00

In current code, regular file and directory use same struct
ceph_file_info to store fs specific data so the struct has to
include some fields which are only used for directory
(e.g., readdir related info), when having plenty of regular files,
it will lead to memory waste.

This patch introduces dedicated ceph_dir_file_info cache for
readdir related thins. So that regular file does not include those
unused fields anymore.

Signed-off-by: Chengguang Xu 
Reviewed-by: "Yan, Zheng" 
Signed-off-by: Ilya Dryomov