linux.git/fs/ceph/file.c, branch v5.9

Merge tag 'ceph-for-5.9-rc3' of git://github.com/ceph/ceph-client

2020-08-28T17:33:04+00:00

Pull ceph fixes from Ilya Dryomov:
 "We have an inode number handling change, prompted by s390x which is a
  64-bit architecture with a 32-bit ino_t, a patch to disallow leases to
  avoid potential data integrity issues when CephFS is re-exported via
  NFS or CIFS and a fix for the bulk of W=1 compilation warnings"

* tag 'ceph-for-5.9-rc3' of git://github.com/ceph/ceph-client:
  ceph: don't allow setlease on cephfs
  ceph: fix inode number handling on arches with 32-bit ino_t
  libceph: add __maybe_unused to DEFINE_CEPH_FEATURE

ceph: don't allow setlease on cephfs

2020-08-24T18:06:54+00:00

Leases don't currently work correctly on kcephfs, as they are not broken
when caps are revoked. They could eventually be implemented similarly to
how we did them in libcephfs, but for now don't allow them.

[ idryomov: no need for simple_nosetlease() in ceph_dir_fops and
  ceph_snapdir_fops ]

Signed-off-by: Jeff Layton 
Reviewed-by: Ilya Dryomov 
Signed-off-by: Ilya Dryomov

ceph: fix inode number handling on arches with 32-bit ino_t

2020-08-24T15:25:26+00:00

Tuan and Ulrich mentioned that they were hitting a problem on s390x,
which has a 32-bit ino_t value, even though it's a 64-bit arch (for
historical reasons).

I think the current handling of inode numbers in the ceph driver is
wrong. It tries to use 32-bit inode numbers on 32-bit arches, but that's
actually not a problem. 32-bit arches can deal with 64-bit inode numbers
just fine when userland code is compiled with LFS support (the common
case these days).

What we really want to do is just use 64-bit numbers everywhere, unless
someone has mounted with the ino32 mount option. In that case, we want
to ensure that we hash the inode number down to something that will fit
in 32 bits before presenting the value to userland.

Add new helper functions that do this, and only do the conversion before
presenting these values to userland in getattr and readdir.

The inode table hashvalue is changed to just cast the inode number to
unsigned long, as low-order bits are the most likely to vary anyway.

While it's not strictly required, we do want to put something in
inode->i_ino. Instead of basing it on BITS_PER_LONG, however, base it on
the size of the ino_t type.

NOTE: This is a user-visible change on 32-bit arches:

1/ inode numbers will be seen to have changed between kernel versions.
   32-bit arches will see large inode numbers now instead of the hashed
   ones they saw before.

2/ any really old software not built with LFS support may start failing
   stat() calls with -EOVERFLOW on inode numbers >2^32. Nothing much we
   can do about these, but hopefully the intersection of people running
   such code on ceph will be very small.

The workaround for both problems is to mount with "-o ino32".

[ idryomov: changelog tweak ]

URL: https://tracker.ceph.com/issues/46828
Reported-by: Ulrich Weigand 
Reported-and-Tested-by: Tuan Hoang1 
Signed-off-by: Jeff Layton 
Reviewed-by: "Yan, Zheng" 
Signed-off-by: Ilya Dryomov

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59+00:00

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva

ceph: do not access the kiocb after aio requests

2020-08-03T09:05:25+00:00

In aio case, if the completion comes very fast just before the
ceph_read_iter() returns to fs/aio.c, the kiocb will be freed in
the completion callback, then if ceph_read_iter() access again
we will potentially hit the use-after-free bug.

[ jlayton: initialize direct_lock early, and use it everywhere ]

URL: https://tracker.ceph.com/issues/45649
Signed-off-by: Xiubo Li 
Signed-off-by: Jeff Layton 
Signed-off-by: Ilya Dryomov

ceph: add read/write latency metric support

2020-06-01T11:22:51+00:00

Calculate the latency for OSD read requests. Add a new r_end_stamp
field to struct ceph_osd_request that will hold the time of that
the reply was received. Use that to calculate the RTT for each call,
and divide the sum of those by number of calls to get averate RTT.

Keep a tally of RTT for OSD writes and number of calls to track average
latency of OSD writes.

URL: https://tracker.ceph.com/issues/43215
Signed-off-by: Xiubo Li 
Reviewed-by: Jeff Layton 
Signed-off-by: Ilya Dryomov

ceph: fix potential bad pointer deref in async dirops cb's

2020-04-13T17:33:47+00:00

The new async dirops callback routines can pass ERR_PTR values to
ceph_mdsc_free_path, which could cause an oops. Make ceph_mdsc_free_path
ignore ERR_PTR values. Also, ensure that the pr_warn messages look sane
even if ceph_mdsc_build_path fails.

Reported-by: Dan Carpenter 
Signed-off-by: Jeff Layton 
Reviewed-by: Ilya Dryomov 
Signed-off-by: Ilya Dryomov

ceph: simplify calling of ceph_get_fmode()

2020-03-30T10:42:42+00:00

Originally, calling ceph_get_fmode() for open files is by thread that
handles request reply. There is a small window between updating caps and
and waking the request initiator. We need to prevent ceph_check_caps()
from releasing wanted caps in the window.

Previous patches made fill_inode() call __ceph_touch_fmode() for open file
requests. This prevented ceph_check_caps() from releasing wanted caps for
'caps_wanted_delay_min' seconds, enough for request initiator to get
woken up and call ceph_get_fmode().

This allows us to now call ceph_get_fmode() in ceph_open() instead.

Signed-off-by: "Yan, Zheng" 
Reviewed-by: Jeff Layton 
Signed-off-by: Ilya Dryomov

ceph: remove delay check logic from ceph_check_caps()

2020-03-30T10:42:42+00:00

__ceph_caps_file_wanted() already checks 'caps_wanted_delay_min' and
'caps_wanted_delay_max'. There is no need to duplicate the logic in
ceph_check_caps() and __send_cap()

Signed-off-by: "Yan, Zheng" 
Reviewed-by: Jeff Layton 
Signed-off-by: Ilya Dryomov

ceph: consider inode's last read/write when calculating wanted caps

2020-03-30T10:42:42+00:00

Add i_last_rd and i_last_wr to ceph_inode_info. These fields are
used to track the last time the client acquired read/write caps for
the inode.

If there is no read/write on an inode for 'caps_wanted_delay_max'
seconds, __ceph_caps_file_wanted() does not request caps for read/write
even there are open files.

Call __ceph_touch_fmode() for dir operations. __ceph_caps_file_wanted()
calculates dir's wanted caps according to last dir read/modification. If
there is recent dir read, dir inode wants CEPH_CAP_ANY_SHARED caps. If
there is recent dir modification, also wants CEPH_CAP_FILE_EXCL.

Readdir is a special case. Dir inode wants CEPH_CAP_FILE_EXCL after
readdir, as with that, modifications do not need to release
CEPH_CAP_FILE_SHARED or invalidate all dentry leases issued by readdir.

Signed-off-by: "Yan, Zheng" 
Reviewed-by: Jeff Layton 
Signed-off-by: Ilya Dryomov