linux.git/fs/btrfs/tests, branch v5.5

btrfs: return error pointer from alloc_test_extent_buffer

2019-12-13T13:09:24+00:00

Callers of alloc_test_extent_buffer have not correctly interpreted the
return value as error pointer, as alloc_test_extent_buffer should behave
as alloc_extent_buffer. The self-tests were unaffected but
btrfs_find_create_tree_block could call both functions and that would
cause problems up in the call chain.

Fixes: faa2dbf004e8 ("Btrfs: add sanity tests for new qgroup accounting code")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Dan Carpenter 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba

btrfs: rename btrfs_block_group_cache

2019-11-18T16:51:51+00:00

The type name is misleading, a single entry is named 'cache' while this
normally means a collection of objects. Rename that everywhere. Also the
identifier was quite long, making function prototypes harder to format.

Suggested-by: Nikolay Borisov 
Reviewed-by: Qu Wenruo 
Signed-off-by: David Sterba

btrfs: add dedicated members for start and length of a block group

2019-11-18T16:51:45+00:00

The on-disk format of block group item makes use of the key that stores
the offset and length. This is further used in the code, although this
makes thing harder to understand. The key is also packed so the
offset/length is not properly aligned as u64.

Add start (key.objectid) and length (key.offset) members to block group
and remove the embedded key.  When the item is searched or written, a
local variable for key is used.

Reviewed-by: Johannes Thumshirn 
Reviewed-by: Nikolay Borisov 
Reviewed-by: Qu Wenruo 
Signed-off-by: David Sterba

Btrfs: fix selftests failure due to uninitialized i_mode in test inodes

2019-09-24T12:45:02+00:00

Some of the self tests create a test inode, setup some extents and then do
calls to btrfs_get_extent() to test that the corresponding extent maps
exist and are correct. However btrfs_get_extent(), since the 5.2 merge
window, now errors out when it finds a regular or prealloc extent for an
inode that does not correspond to a regular file (its ->i_mode is not
S_IFREG). This causes the self tests to fail sometimes, specially when
KASAN, slub_debug and page poisoning are enabled:

  $ modprobe btrfs
  modprobe: ERROR: could not insert 'btrfs': Invalid argument

  $ dmesg
  [ 9414.691648] Btrfs loaded, crc32c=crc32c-intel, debug=on, assert=on, integrity-checker=on, ref-verify=on
  [ 9414.692655] BTRFS: selftest: sectorsize: 4096  nodesize: 4096
  [ 9414.692658] BTRFS: selftest: running btrfs free space cache tests
  [ 9414.692918] BTRFS: selftest: running extent only tests
  [ 9414.693061] BTRFS: selftest: running bitmap only tests
  [ 9414.693366] BTRFS: selftest: running bitmap and extent tests
  [ 9414.696455] BTRFS: selftest: running space stealing from bitmap to extent tests
  [ 9414.697131] BTRFS: selftest: running extent buffer operation tests
  [ 9414.697133] BTRFS: selftest: running btrfs_split_item tests
  [ 9414.697564] BTRFS: selftest: running extent I/O tests
  [ 9414.697583] BTRFS: selftest: running find delalloc tests
  [ 9415.081125] BTRFS: selftest: running find_first_clear_extent_bit test
  [ 9415.081278] BTRFS: selftest: running extent buffer bitmap tests
  [ 9415.124192] BTRFS: selftest: running inode tests
  [ 9415.124195] BTRFS: selftest: running btrfs_get_extent tests
  [ 9415.127909] BTRFS: selftest: running hole first btrfs_get_extent test
  [ 9415.128343] BTRFS critical (device (efault)): regular/prealloc extent found for non-regular inode 256
  [ 9415.131428] BTRFS: selftest: fs/btrfs/tests/inode-tests.c:904 expected a real extent, got 0

This happens because the test inodes are created without ever initializing
the i_mode field of the inode, and neither VFS's new_inode() nor the btrfs
callback btrfs_alloc_inode() initialize the i_mode. Initialization of the
i_mode is done through the various callbacks used by the VFS to create
new inodes (regular files, directories, symlinks, tmpfiles, etc), which
all call btrfs_new_inode() which in turn calls inode_init_owner(), which
sets the inode's i_mode. Since the tests only uses new_inode() to create
the test inodes, the i_mode was never initialized.

This always happens on a VM I used with kasan, slub_debug and many other
debug facilities enabled. It also happened to someone who reported this
on bugzilla (on a 5.3-rc).

Fix this by setting i_mode to S_IFREG at btrfs_new_test_inode().

Fixes: 6bf9e4bd6a2778 ("btrfs: inode: Verify inode mode to avoid NULL pointer dereference")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204397
Signed-off-by: Filipe Manana 
Reviewed-by: Qu Wenruo 
Signed-off-by: David Sterba

btrfs: stop clearing EXTENT_DIRTY in inode I/O tree

2019-09-09T12:59:17+00:00

Since commit fee187d9d9dd ("Btrfs: do not set EXTENT_DIRTY along with
EXTENT_DELALLOC"), we never set EXTENT_DIRTY in inode->io_tree, so we
can simplify and stop trying to clear it.

Reviewed-by: Josef Bacik 
Signed-off-by: Omar Sandoval 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba

Btrfs: make test_find_first_clear_extent_bit fail on incorrect results

2019-09-09T12:59:05+00:00

If any call to find_first_clear_extent_bit() returns an unexpected result,
the test should fail and not just print an error message, otherwise it
makes detection of regressions much harder to notice.

Fixes: 1eaebb341d2b41 ("btrfs: Don't trim returned range based on input value in find_first_clear_extent_bit")
Reviewed-by: Nikolay Borisov 
Signed-off-by: Filipe Manana 
Signed-off-by: David Sterba

Btrfs: fix memory leaks in the test test_find_first_clear_extent_bit

2019-09-09T12:59:05+00:00

The test creates an extent io tree and sets several ranges with the
CHUNK_ALLOCATED and CHUNK_TRIMMED bits, resulting in the allocation of
several extent state structures. However the test never clears those
ranges, resulting in memory leaks of the extent state structures.

This is detected when CONFIG_BTRFS_DEBUG is set once we remove the
btrfs module (rmmod btrfs):

[57399.787918] BTRFS: state leak: start 67108864 end 75497471 state 1 in tree 1 refs 1
[57399.790155] BTRFS: state leak: start 33554432 end 67108863 state 33 in tree 1 refs 1
[57399.791941] BTRFS: state leak: start 1048576 end 4194303 state 33 in tree 1 refs 1
[57399.793753] BTRFS: state leak: start 67108864 end 75497471 state 1 in tree 1 refs 1
[57399.795188] BTRFS: state leak: start 33554432 end 67108863 state 33 in tree 1 refs 1
[57399.796453] BTRFS: state leak: start 1048576 end 4194303 state 33 in tree 1 refs 1
[57399.797765] BTRFS: state leak: start 67108864 end 75497471 state 1 in tree 1 refs 1
[57399.799049] BTRFS: state leak: start 33554432 end 67108863 state 33 in tree 1 refs 1
[57399.800142] BTRFS: state leak: start 1048576 end 4194303 state 33 in tree 1 refs 1
[57399.801126] BTRFS: state leak: start 67108864 end 75497471 state 1 in tree 1 refs 1
[57399.802106] BTRFS: state leak: start 33554432 end 67108863 state 33 in tree 1 refs 1
[57399.803119] BTRFS: state leak: start 1048576 end 4194303 state 33 in tree 1 refs 1
[57399.804153] BTRFS: state leak: start 67108864 end 75497471 state 1 in tree 1 refs 1
[57399.805196] BTRFS: state leak: start 33554432 end 67108863 state 33 in tree 1 refs 1
[57399.806191] BTRFS: state leak: start 1048576 end 4194303 state 33 in tree 1 refs 1

The start and end offsets reported correspond exactly to the ranges
used by the test.

So fix that by clearing all the ranges when the test finishes.

Fixes: 1eaebb341d2b41 ("btrfs: Don't trim returned range based on input value in find_first_clear_extent_bit")
Signed-off-by: Filipe Manana 
Signed-off-by: David Sterba

btrfs: move basic block_group definitions to their own header

2019-09-09T12:59:03+00:00

This is prep work for moving all of the block group cache code into its
own file.

Signed-off-by: Josef Bacik 
Reviewed-by: David Sterba 
[ minor comment updates ]
Signed-off-by: David Sterba

btrfs: Remove leftover of in-band dedupe

2019-09-09T12:58:59+00:00

It's unlikely in-band dedupe is going to land so just remove any
leftovers - dedupe.h header as well as the 'dedupe' parameter to
btrfs_set_extent_delalloc.

Signed-off-by: Nikolay Borisov 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba

Merge branch 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2019-07-19T17:42:02+00:00

Pull vfs mount updates from Al Viro:
 "The first part of mount updates.

  Convert filesystems to use the new mount API"

* 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  mnt_init(): call shmem_init() unconditionally
  constify ksys_mount() string arguments
  don't bother with registering rootfs
  init_rootfs(): don't bother with init_ramfs_fs()
  vfs: Convert smackfs to use the new mount API
  vfs: Convert selinuxfs to use the new mount API
  vfs: Convert securityfs to use the new mount API
  vfs: Convert apparmorfs to use the new mount API
  vfs: Convert openpromfs to use the new mount API
  vfs: Convert xenfs to use the new mount API
  vfs: Convert gadgetfs to use the new mount API
  vfs: Convert oprofilefs to use the new mount API
  vfs: Convert ibmasmfs to use the new mount API
  vfs: Convert qib_fs/ipathfs to use the new mount API
  vfs: Convert efivarfs to use the new mount API
  vfs: Convert configfs to use the new mount API
  vfs: Convert binfmt_misc to use the new mount API
  convenience helper: get_tree_single()
  convenience helper get_tree_nodev()
  vfs: Kill sget_userns()
  ...