linux.git/fs/btrfs/tests, branch v4.15

Btrfs: fix reported number of inode blocks after buffered append writes

2017-11-15T16:27:46+00:00

The patch from commit a7e3b975a0f9 ("Btrfs: fix reported number of inode
blocks") introduced a regression where if we do a buffered write starting
at position equal to or greater than the file's size and then stat(2) the
file before writeback is triggered, the number of used blocks does not
change (unless there's a prealloc/unwritten extent). Example:

  $ xfs_io -f -c "pwrite -S 0xab 0 64K" foobar
  $ du -h foobar
  0	foobar
  $ sync
  $ du -h foobar
  64K	foobar

The first version of that patch didn't had this regression and the second
version, which was the one committed, was made only to address some
performance regression detected by the intel test robots using fs_mark.

This fixes the regression by setting the new delaloc bit in the range, and
doing it at btrfs_dirty_pages() while setting the regular dealloc bit as
well, so that this way we set both bits at once avoiding navigation of the
inode's io tree twice. Doing it at btrfs_dirty_pages() is also the most
meaninful place, as we should set the new dellaloc bit when if we set the
delalloc bit, which happens only if we copied bytes into the pages at
__btrfs_buffered_write().

This was making some of LTP's du tests fail, which can be quickly run
using a command line like the following:

  $ ./runltp -q -p -l /ltp.log -f commands -s du -d /mnt

Fixes: a7e3b975a0f9 ("Btrfs: fix reported number of inode blocks")
Signed-off-by: Filipe Manana 
Signed-off-by: David Sterba

Btrfs: rework outstanding_extents

2017-11-01T19:45:35+00:00

Right now we do a lot of weird hoops around outstanding_extents in order
to keep the extent count consistent.  This is because we logically
transfer the outstanding_extent count from the initial reservation
through the set_delalloc_bits.  This makes it pretty difficult to get a
handle on how and when we need to mess with outstanding_extents.

Fix this by revamping the rules of how we deal with outstanding_extents.
Now instead everybody that is holding on to a delalloc extent is
required to increase the outstanding extents count for itself.  This
means we'll have something like this

btrfs_delalloc_reserve_metadata	- outstanding_extents = 1
 btrfs_set_extent_delalloc	- outstanding_extents = 2
btrfs_release_delalloc_extents	- outstanding_extents = 1

for an initial file write.  Now take the append write where we extend an
existing delalloc range but still under the maximum extent size

btrfs_delalloc_reserve_metadata - outstanding_extents = 2
  btrfs_set_extent_delalloc
    btrfs_set_bit_hook		- outstanding_extents = 3
    btrfs_merge_extent_hook	- outstanding_extents = 2
btrfs_delalloc_release_extents	- outstanding_extnets = 1

In order to make the ordered extent transition we of course must now
make ordered extents carry their own outstanding_extent reservation, so
for cow_file_range we end up with

btrfs_add_ordered_extent	- outstanding_extents = 2
clear_extent_bit		- outstanding_extents = 1
btrfs_remove_ordered_extent	- outstanding_extents = 0

This makes all manipulations of outstanding_extents much more explicit.
Every successful call to btrfs_delalloc_reserve_metadata _must_ now be
combined with btrfs_release_delalloc_extents, even in the error case, as
that is the only function that actually modifies the
outstanding_extents counter.

The drawback to this is now we are much more likely to have transient
cases where outstanding_extents is much larger than it actually should
be.  This could happen before as we manipulated the delalloc bits, but
now it happens basically at every write.  This may put more pressure on
the ENOSPC flushing code, but I think making this code simpler is worth
the cost.  I have another change coming to mitigate this side-effect
somewhat.

I also added trace points for the counter manipulation.  These were used
by a bpf script I wrote to help track down leak issues.

Signed-off-by: Josef Bacik 
Signed-off-by: David Sterba

btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents

2017-11-01T19:45:34+00:00

The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and
offset (encoded as a single logical address) to a list of extent refs.
LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping
(extent ref -> extent bytenr and offset, or logical address).  These are
useful capabilities for programs that manipulate extents and extent
references from userspace (e.g. dedup and defrag utilities).

When the extents are uncompressed (and not encrypted and not other),
check_extent_in_eb performs filtering of the extent refs to remove any
extent refs which do not contain the same extent offset as the 'logical'
parameter's extent offset.  This prevents LOGICAL_INO from returning
references to more than a single block.

To find the set of extent references to an uncompressed extent from [a, b),
userspace has to run a loop like this pseudocode:

	for (i = a; i < b; ++i)
		extent_ref_set += LOGICAL_INO(i);

At each iteration of the loop (up to 32768 iterations for a 128M extent),
data we are interested in is collected in the kernel, then deleted by
the filter in check_extent_in_eb.

When the extents are compressed (or encrypted or other), the 'logical'
parameter must be an extent bytenr (the 'a' parameter in the loop).
No filtering by extent offset is done (or possible?) so the result is
the complete set of extent refs for the entire extent.  This removes
the need for the loop, since we get all the extent refs in one call.

Add an 'ignore_offset' argument to iterate_inodes_from_logical,
[...several levels of function call graph...], and check_extent_in_eb, so
that we can disable the extent offset filtering for uncompressed extents.
This flag can be set by an improved version of the LOGICAL_INO ioctl to
get either behavior as desired.

There is no functional change in this patch.  The new flag is always
false.

Signed-off-by: Zygo Blaxell 
Reviewed-by: David Sterba 
[ minor coding style fixes ]
Signed-off-by: David Sterba

btrfs: Replace opencoded sizes with their symbolic constants

2017-10-30T11:28:01+00:00

Currently btrfs' code uses a mix of opencoded sizes and defines from sizes.h.
Let's unifiy the code base to always use the symbolic constants. No functional
changes

Signed-off-by: Nikolay Borisov 
Signed-off-by: David Sterba

btrfs: tests: Fix a memory leak in error handling path in 'run_test()'

2017-10-30T11:27:56+00:00

If 'btrfs_alloc_path()' fails, we must free the resources already
allocated, as done in the other error handling paths in this function.

Signed-off-by: Christophe JAILLET 
Reviewed-by: Qu Wenruo 
Signed-off-by: David Sterba

btrfs: remove unused sectorsize member

2017-08-16T12:19:53+00:00

The sectorsize member of btrfs_block_group_cache is unused. So remove it, this
reduces the number of holes in the struct.

With patch:
/* size: 856, cachelines: 14, members: 40 */
/* sum members: 837, holes: 4, sum holes: 19 */
/* bit holes: 1, sum bit holes: 29 bits */
/* last cacheline: 24 bytes */

Without patch:
/* size: 864, cachelines: 14, members: 41 */
/* sum members: 841, holes: 5, sum holes: 23 */
/* bit holes: 1, sum bit holes: 29 bits */
/* last cacheline: 32 bytes */

Signed-off-by: Nikolay Borisov 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba

Btrfs: replace tree->mapping with tree->private_data

2017-06-19T16:25:58+00:00

For extent_io tree's we have carried the address_mapping of the inode
around in the io tree in order to pull the inode back out for calling
into various tree ops hooks.  This works fine when everything that has
an extent_io_tree has an inode.  But we are going to remove the
btree_inode, so we need to change this.  Instead just have a generic
void * for private data that we can initialize with, and have all the
tree ops use that instead.  This had a lot of cascading changes but
should be relatively straightforward.

Signed-off-by: Josef Bacik 
Reviewed-by: Chandan Rajendra 
Reviewed-by: David Sterba 
[ minor reordering of the callback prototypes ]
Signed-off-by: David Sterba

btrfs: remove unused qgroup members from btrfs_trans_handle

2017-04-18T12:07:25+00:00

The members have been effectively unused since "Btrfs: rework qgroup
accounting" (fcebe4562dec83b3), there's no substitute for
assert_qgroups_uptodate so it's removed as well.

Reviewed-by: Qu Wenruo 
Signed-off-by: David Sterba

btrfs: Make get_extent_t take btrfs_inode

2017-02-28T10:30:11+00:00

In addition to changing the signature, this patch also switches
all the functions which are used as an argument to also take btrfs_inode.
Namely those are: btrfs_get_extent and btrfs_get_extent_filemap.

Signed-off-by: Nikolay Borisov 
Signed-off-by: David Sterba

btrfs: Make btrfs_drop_extent_cache take btrfs_inode

2017-02-28T10:30:08+00:00

Signed-off-by: Nikolay Borisov 
Signed-off-by: David Sterba