linux.git/fs/btrfs/compression.c, branch v5.3

btrfs: lift bio_set_dev from bio allocation helpers

2019-07-02T10:30:51+00:00

The block device is passed around for the only purpose to set it in new
bios. Move the assignment one level up. This is a preparatory patch for
further bdev cleanups.

Signed-off-by: David Sterba

btrfs: correctly validate compression type

2019-07-02T10:30:48+00:00

Nikolay reported the following KASAN splat when running btrfs/048:

[ 1843.470920] ==================================================================
[ 1843.471971] BUG: KASAN: slab-out-of-bounds in strncmp+0x66/0xb0
[ 1843.472775] Read of size 1 at addr ffff888111e369e2 by task btrfs/3979

[ 1843.473904] CPU: 3 PID: 3979 Comm: btrfs Not tainted 5.2.0-rc3-default #536
[ 1843.475009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1843.476322] Call Trace:
[ 1843.476674]  dump_stack+0x7c/0xbb
[ 1843.477132]  ? strncmp+0x66/0xb0
[ 1843.477587]  print_address_description+0x114/0x320
[ 1843.478256]  ? strncmp+0x66/0xb0
[ 1843.478740]  ? strncmp+0x66/0xb0
[ 1843.479185]  __kasan_report+0x14e/0x192
[ 1843.479759]  ? strncmp+0x66/0xb0
[ 1843.480209]  kasan_report+0xe/0x20
[ 1843.480679]  strncmp+0x66/0xb0
[ 1843.481105]  prop_compression_validate+0x24/0x70
[ 1843.481798]  btrfs_xattr_handler_set_prop+0x65/0x160
[ 1843.482509]  __vfs_setxattr+0x71/0x90
[ 1843.483012]  __vfs_setxattr_noperm+0x84/0x130
[ 1843.483606]  vfs_setxattr+0xac/0xb0
[ 1843.484085]  setxattr+0x18c/0x230
[ 1843.484546]  ? vfs_setxattr+0xb0/0xb0
[ 1843.485048]  ? __mod_node_page_state+0x1f/0xa0
[ 1843.485672]  ? _raw_spin_unlock+0x24/0x40
[ 1843.486233]  ? __handle_mm_fault+0x988/0x1290
[ 1843.486823]  ? lock_acquire+0xb4/0x1e0
[ 1843.487330]  ? lock_acquire+0xb4/0x1e0
[ 1843.487842]  ? mnt_want_write_file+0x3c/0x80
[ 1843.488442]  ? debug_lockdep_rcu_enabled+0x22/0x40
[ 1843.489089]  ? rcu_sync_lockdep_assert+0xe/0x70
[ 1843.489707]  ? __sb_start_write+0x158/0x200
[ 1843.490278]  ? mnt_want_write_file+0x3c/0x80
[ 1843.490855]  ? __mnt_want_write+0x98/0xe0
[ 1843.491397]  __x64_sys_fsetxattr+0xba/0xe0
[ 1843.492201]  ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 1843.493201]  do_syscall_64+0x6c/0x230
[ 1843.493988]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1843.495041] RIP: 0033:0x7fa7a8a7707a
[ 1843.495819] Code: 48 8b 0d 21 de 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 be 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ee dd 2b 00 f7 d8 64 89 01 48
[ 1843.499203] RSP: 002b:00007ffcb73bca38 EFLAGS: 00000202 ORIG_RAX: 00000000000000be
[ 1843.500210] RAX: ffffffffffffffda RBX: 00007ffcb73bda9d RCX: 00007fa7a8a7707a
[ 1843.501170] RDX: 00007ffcb73bda9d RSI: 00000000006dc050 RDI: 0000000000000003
[ 1843.502152] RBP: 00000000006dc050 R08: 0000000000000000 R09: 0000000000000000
[ 1843.503109] R10: 0000000000000002 R11: 0000000000000202 R12: 00007ffcb73bda91
[ 1843.504055] R13: 0000000000000003 R14: 00007ffcb73bda82 R15: ffffffffffffffff

[ 1843.505268] Allocated by task 3979:
[ 1843.505771]  save_stack+0x19/0x80
[ 1843.506211]  __kasan_kmalloc.constprop.5+0xa0/0xd0
[ 1843.506836]  setxattr+0xeb/0x230
[ 1843.507264]  __x64_sys_fsetxattr+0xba/0xe0
[ 1843.507886]  do_syscall_64+0x6c/0x230
[ 1843.508429]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

[ 1843.509558] Freed by task 0:
[ 1843.510188] (stack is not available)

[ 1843.511309] The buggy address belongs to the object at ffff888111e369e0
                which belongs to the cache kmalloc-8 of size 8
[ 1843.514095] The buggy address is located 2 bytes inside of
                8-byte region [ffff888111e369e0, ffff888111e369e8)
[ 1843.516524] The buggy address belongs to the page:
[ 1843.517561] page:ffff88813f478d80 refcount:1 mapcount:0 mapping:ffff88811940c300 index:0xffff888111e373b8 compound_mapcount: 0
[ 1843.519993] flags: 0x4404000010200(slab|head)
[ 1843.520951] raw: 0004404000010200 ffff88813f48b008 ffff888119403d50 ffff88811940c300
[ 1843.522616] raw: ffff888111e373b8 000000000016000f 00000001ffffffff 0000000000000000
[ 1843.524281] page dumped because: kasan: bad access detected

[ 1843.525936] Memory state around the buggy address:
[ 1843.526975]  ffff888111e36880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.528479]  ffff888111e36900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.530138] >ffff888111e36980: fc fc fc fc fc fc fc fc fc fc fc fc 02 fc fc fc
[ 1843.531877]                                                        ^
[ 1843.533287]  ffff888111e36a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.534874]  ffff888111e36a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.536468] ==================================================================

This is caused by supplying a too short compression value ('lz') in the
test-case and comparing it to 'lzo' with strncmp() and a length of 3.
strncmp() read past the 'lz' when looking for the 'o' and thus caused an
out-of-bounds read.

Introduce a new check 'btrfs_compress_is_valid_type()' which not only
checks the user-supplied value against known compression types, but also
employs checks for too short values.

Reported-by: Nikolay Borisov 
Fixes: 272e5326c783 ("btrfs: prop: fix vanished compression property after failed set")
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Nikolay Borisov 
Signed-off-by: Johannes Thumshirn 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba

btrfs: remove assumption about csum type form btrfs_print_data_csum_error()

2019-07-01T11:35:02+00:00

btrfs_print_data_csum_error() still assumed checksums to be 32 bit in
size.  Make it size agnostic.

Reviewed-by: Nikolay Borisov 
Signed-off-by: Johannes Thumshirn 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba

btrfs: directly call into crypto framework for checksumming

2019-07-01T11:35:02+00:00

Currently btrfs_csum_data() relied on the crc32c() wrapper around the
crypto framework for calculating the CRCs.

As we have our own crypto_shash structure in the fs_info now, we can
directly call into the crypto framework without going trough the wrapper.

This way we can even remove the btrfs_csum_data() and btrfs_csum_final()
wrappers.

The module dependency on crc32c is preserved via MODULE_SOFTDEP("pre:
crc32c"), which was previously provided by LIBCRC32C config option doing
the same.

Signed-off-by: Johannes Thumshirn 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba

btrfs: don't assume compressed_bio sums to be 4 bytes

2019-07-01T11:35:01+00:00

BTRFS has the implicit assumption that a checksum in compressed_bio is 4
bytes. While this is true for CRC32C, it is not for any other checksum.

Change the data type to be a byte array and adjust loop index calculation
accordingly.

Signed-off-by: Johannes Thumshirn 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba

btrfs: don't assume ordered sums to be 4 bytes

2019-07-01T11:35:00+00:00

BTRFS has the implicit assumption that a checksum in btrfs_orderd_sums
is 4 bytes. While this is true for CRC32C, it is not for any other
checksum.

Change the data type to be a byte array and adjust loop index
calculation accordingly.

This includes moving the adjustment of 'index' by 'ins_size' in
btrfs_csum_file_blocks() before dividing 'ins_size' by the checksum
size, because before this patch the 'sums' member of 'struct
btrfs_ordered_sum' was 4 Bytes in size and afterwards it is only one
byte.

Reviewed-by: Nikolay Borisov 
Signed-off-by: Johannes Thumshirn 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba

Merge tag 'for-5.2-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

2019-05-20T16:52:35+00:00

Pull btrfs fixes from David Sterba:
 "Notable highlights:

   - fixes for some long-standing bugs in fsync that were quite hard to
     catch but now finaly fixed

   - some fixups to error handling paths that did not properly clean up
     (locking, memory)

   - fix to space reservation for inheriting properties"

* tag 'for-5.2-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: tree-checker: detect file extent items with overlapping ranges
  Btrfs: fix race between ranged fsync and writeback of adjacent ranges
  Btrfs: avoid fallback to transaction commit during fsync of files with holes
  btrfs: extent-tree: Fix a bug that btrfs is unable to add pinned bytes
  btrfs: sysfs: don't leak memory when failing add fsid
  btrfs: sysfs: Fix error path kobject memory leak
  Btrfs: do not abort transaction at btrfs_update_root() after failure to COW path
  btrfs: use the existing reserved items for our first prop for inheritance
  btrfs: don't double unlock on error in btrfs_punch_hole
  btrfs: Check the compression level before getting a workspace

Merge tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block

2019-05-08T01:14:36+00:00

Pull block updates from Jens Axboe:
 "Nothing major in this series, just fixes and improvements all over the
  map. This contains:

   - Series of fixes for sed-opal (David, Jonas)

   - Fixes and performance tweaks for BFQ (via Paolo)

   - Set of fixes for bcache (via Coly)

   - Set of fixes for md (via Song)

   - Enabling multi-page for passthrough requests (Ming)

   - Queue release fix series (Ming)

   - Device notification improvements (Martin)

   - Propagate underlying device rotational status in loop (Holger)

   - Removal of mtip32xx trim support, which has been disabled for years
     (Christoph)

   - Improvement and cleanup of nvme command handling (Christoph)

   - Add block SPDX tags (Christoph)

   - Cleanup/hardening of bio/bvec iteration (Christoph)

   - A few NVMe pull requests (Christoph)

   - Removal of CONFIG_LBDAF (Christoph)

   - Various little fixes here and there"

* tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block: (164 commits)
  block: fix mismerge in bvec_advance
  block: don't drain in-progress dispatch in blk_cleanup_queue()
  blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release
  blk-mq: always free hctx after request queue is freed
  blk-mq: split blk_mq_alloc_and_init_hctx into two parts
  blk-mq: free hw queue's resource in hctx's release handler
  blk-mq: move cancel of requeue_work into blk_mq_release
  blk-mq: grab .q_usage_counter when queuing request from plug code path
  block: fix function name in comment
  nvmet: protect discovery change log event list iteration
  nvme: mark nvme_core_init and nvme_core_exit static
  nvme: move command size checks to the core
  nvme-fabrics: check more command sizes
  nvme-pci: check more command sizes
  nvme-pci: remove an unneeded variable initialization
  nvme-pci: unquiesce admin queue on shutdown
  nvme-pci: shutdown on timeout during deletion
  nvme-pci: fix psdt field for single segment sgls
  nvme-multipath: don't print ANA group state by default
  nvme-multipath: split bios with the ns_head bio_set before submitting
  ...

btrfs: Check the compression level before getting a workspace

2019-05-03T16:21:25+00:00

When a file's compression property is set as zlib or zstd but leave
the compression mount option not be set, that means btrfs will try
to compress the file with default compression level. But in
btrfs_compress_pages(), it calls get_workspace() with level = 0.
This will return a workspace with a wrong compression level.
For zlib, the compression level in the workspace will be 0
(that means "store only"). And for zstd, the compression in the
workspace will be 1, not the default level 3.

How to reproduce:
  mkfs -t btrfs /dev/sdb
  mount /dev/sdb /mnt/
  mkdir /mnt/zlib
  btrfs property set /mnt/zlib/ compression zlib
  dd if=/dev/zero of=/mnt/zlib/compression-friendly-file-10M bs=1M count=10
  sync
  btrfs-debugfs -f /mnt/zlib/compression-friendly-file-10M

btrfs-debugfs output:
* before:
  ...
  (258 9961472): ram 524288 disk 1106247680 disk_size 524288
  file: ... extents 20 disk size 10485760 logical size 10485760 ratio 1.00

* after:
 ...
 (258 10354688): ram 131072 disk 14217216 disk_size 4096
 file: ... extents 80 disk size 327680 logical size 10485760 ratio 32.00

The steps for zstd are similar, but need to put a debugging message to
show the level of the return workspace in zstd_get_workspace().

This commit adds a check of the compression level before getting a
workspace by set_level().

CC: stable@vger.kernel.org # 5.1+
Signed-off-by: Johnny Chang 
Reviewed-by: David Sterba 
Signed-off-by: David Sterba

block: remove the i argument to bio_for_each_segment_all

2019-04-30T15:26:13+00:00

We only have two callers that need the integer loop iterator, and they
can easily maintain it themselves.

Suggested-by: Matthew Wilcox 
Reviewed-by: Johannes Thumshirn 
Acked-by: David Sterba 
Reviewed-by: Hannes Reinecke 
Acked-by: Coly Li 
Reviewed-by: Matthew Wilcox 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe