linux.git/fs/block_dev.c, branch v5.3-rc2

Merge tag 'for-linus-20190726' of git://git.kernel.dk/linux-block

2019-07-26T17:32:12+00:00

Pull block fixes from Jens Axboe:

 - Several io_uring fixes/improvements:
     - Blocking fix for O_DIRECT (me)
     - Latter page slowness for registered buffers (me)
     - Fix poll hang under certain conditions (me)
     - Defer sequence check fix for wrapped rings (Zhengyuan)
     - Mismatch in async inc/dec accounting (Zhengyuan)
     - Memory ordering issue that could cause stall (Zhengyuan)
      - Track sequential defer in bytes, not pages (Zhengyuan)

 - NVMe pull request from Christoph

 - Set of hang fixes for wbt (Josef)

 - Redundant error message kill for libahci (Ding)

 - Remove unused blk_mq_sched_started_request() and related ops (Marcos)

 - drbd dynamic alloc shash descriptor to reduce stack use (Arnd)

 - blkcg ->pd_stat() non-debug print (Tejun)

 - bcache memory leak fix (Wei)

 - Comment fix (Akinobu)

 - BFQ perf regression fix (Paolo)

* tag 'for-linus-20190726' of git://git.kernel.dk/linux-block: (24 commits)
  io_uring: ensure ->list is initialized for poll commands
  Revert "nvme-pci: don't create a read hctx mapping without read queues"
  nvme: fix multipath crash when ANA is deactivated
  nvme: fix memory leak caused by incorrect subsystem free
  nvme: ignore subnqn for ADATA SX6000LNP
  drbd: dynamically allocate shash descriptor
  block: blk-mq: Remove blk_mq_sched_started_request and started_request
  bcache: fix possible memory leak in bch_cached_dev_run()
  io_uring: track io length in async_list based on bytes
  io_uring: don't use iov_iter_advance() for fixed buffers
  block: properly handle IOCB_NOWAIT for async O_DIRECT IO
  blk-mq: allow REQ_NOWAIT to return an error inline
  io_uring: add a memory barrier before atomic_read
  rq-qos: use a mb for got_token
  rq-qos: set ourself TASK_UNINTERRUPTIBLE after we schedule
  rq-qos: don't reset has_sleepers on spurious wakeups
  rq-qos: fix missed wake-ups in rq_qos_throttle
  wait: add wq_has_single_sleeper helper
  block, bfq: check also in-flight I/O in dispatch plugging
  block: fix sysfs module parameters directory path in comment
  ...

block: properly handle IOCB_NOWAIT for async O_DIRECT IO

2019-07-22T03:46:29+00:00

A caller is supposed to pass in REQ_NOWAIT if we can't block for any
given operation, but O_DIRECT for block devices just ignore this. Hence
we'll block for various resource shortages on the block layer side,
like having to wait for requests.

Use the new REQ_NOWAIT_INLINE to ask for this error to be returned
inline, so we can handle it appropriately and return -EAGAIN to the
caller.

Signed-off-by: Jens Axboe

Merge branch 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2019-07-19T17:42:02+00:00

Pull vfs mount updates from Al Viro:
 "The first part of mount updates.

  Convert filesystems to use the new mount API"

* 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  mnt_init(): call shmem_init() unconditionally
  constify ksys_mount() string arguments
  don't bother with registering rootfs
  init_rootfs(): don't bother with init_ramfs_fs()
  vfs: Convert smackfs to use the new mount API
  vfs: Convert selinuxfs to use the new mount API
  vfs: Convert securityfs to use the new mount API
  vfs: Convert apparmorfs to use the new mount API
  vfs: Convert openpromfs to use the new mount API
  vfs: Convert xenfs to use the new mount API
  vfs: Convert gadgetfs to use the new mount API
  vfs: Convert oprofilefs to use the new mount API
  vfs: Convert ibmasmfs to use the new mount API
  vfs: Convert qib_fs/ipathfs to use the new mount API
  vfs: Convert efivarfs to use the new mount API
  vfs: Convert configfs to use the new mount API
  vfs: Convert binfmt_misc to use the new mount API
  convenience helper: get_tree_single()
  convenience helper get_tree_nodev()
  vfs: Kill sget_userns()
  ...

block_dev: use bio_release_pages in bio_unmap_user

2019-06-29T15:47:31+00:00

Use bio_release_pages instead of duplicating it.

Reviewed-by: Chaitanya Kulkarni 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

block_dev: use bio_release_pages in blkdev_bio_end_io

2019-06-29T15:47:31+00:00

Use bio_release_pages instead of duplicating it.

Reviewed-by: Minwoo Im 
Reviewed-by: Chaitanya Kulkarni 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

block: Don't revalidate bdev of hidden gendisk

2019-05-27T13:35:02+00:00

When hidden gendisk is revalidated, there's no point in revalidating
associated block device as there's none. We would thus just create new
bdev inode, report "detected capacity change from 0 to XXX" message and
evict the bdev inode again. Avoid this pointless dance and confusing
message in the kernel log.

Reviewed-by: Hannes Reinecke 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Jan Kara 
Signed-off-by: Jens Axboe

vfs: Convert bdev to use the new mount API

2019-05-25T22:00:05+00:00

Convert the bdev filesystem to the new internal mount API as the old
one will be obsoleted and removed.  This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.

See Documentation/filesystems/mount_api.txt for more information.

Signed-off-by: David Howells 
cc: Jens Axboe 
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Al Viro

mount_pseudo(): drop 'name' argument, switch to d_make_root()

2019-05-25T21:59:24+00:00

Once upon a time we used to set ->d_name of e.g. pipefs root
so that d_path() on pipes would work.  These days it's
completely pointless - dentries of pipes are not even connected
to pipefs root.  However, mount_pseudo() had set the root
dentry name (passed as the second argument) and callers
kept inventing names to pass to it.  Including those that
didn't *have* any non-root dentries to start with...

All of that had been pointless for about 8 years now; it's
time to get rid of that cargo-culting...

Signed-off-by: Al Viro

treewide: Add SPDX license identifier for missed files

2019-05-21T08:50:45+00:00

Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have EXPORT_.*_SYMBOL_GPL inside which was used in the
   initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

fs/block_dev.c: Remove duplicate header

2019-05-15T02:52:52+00:00

linux/dax.h is included more than once.

Link: http://lkml.kernel.org/r/5c867e95.1c69fb81.4f15a.e5e4@mx.google.com
Signed-off-by: Sabyasachi Gupta 
Acked-by: Souptick Joarder 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds