syzbot reported a bug in in afs_put_vlserverlist.

  kAFS: bad VL server IP address
  BUG: unable to handle page fault for address: fffffffffffffffa
  ...
  Oops: Oops: 0002 [#1] SMP KASAN PTI
  ...
  RIP: 0010:refcount_dec_and_test include/linux/refcount.h:450 [inline]
  RIP: 0010:afs_put_vlserverlist+0x3a/0x220 fs/afs/vl_list.c:67
  ...
  Call Trace:
   <TASK>
   afs_alloc_cell fs/afs/cell.c:218 [inline]
   afs_lookup_cell+0x12a5/0x1680 fs/afs/cell.c:264
   afs_cell_init+0x17a/0x380 fs/afs/cell.c:386
   afs_proc_rootcell_write+0x21f/0x290 fs/afs/proc.c:247
   proc_simple_write+0x114/0x1b0 fs/proc/generic.c:825
   pde_write fs/proc/inode.c:330 [inline]
   proc_reg_write+0x23d/0x330 fs/proc/inode.c:342
   vfs_write+0x25c/0x1180 fs/read_write.c:682
   ksys_write+0x12a/0x240 fs/read_write.c:736
   do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
   do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94
   entry_SYSCALL_64_after_hwframe+0x77/0x7f

Because afs_parse_text_addrs() parses incorrectly, its return value -EINVAL
is assigned to vllist, which results in -EINVAL being used as the vllist
address when afs_put_vlserverlist() is executed.

Set the vllist value to NULL when a parsing error occurs to avoid this
issue.

Fixes: e2c2cb8ef07a ("afs: Simplify cell record handling")
Reported-by: syzbot+5c042fbab0b292c98fc6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5c042fbab0b292c98fc6
Tested-by: syzbot+5c042fbab0b292c98fc6@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/4119365.1753108011@warthog.procyon.org.uk
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>

Add a missing check for reaching the end of the string while attempting
to split a command.

Fixes: f94f70d39cc2 ("afs: Provide a way to configure address priorities")
Reported-by: syzbot+7741f872f3c53385a2e2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7741f872f3c53385a2e2
Signed-off-by: Leo Stone <leocstone@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/4119428.1753108152@warthog.procyon.org.uk
Acked-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>

Pull netfs updates from Christian Brauner:

 - The main API document has been extensively updated/rewritten

 - Fix an oops in write-retry due to mis-resetting the I/O iterator

 - Fix the recording of transferred bytes for short DIO reads

 - Fix a request's work item to not require a reference, thereby
   avoiding the need to get rid of it in BH/IRQ context

 - Fix waiting and waking to be consistent about the waitqueue used

 - Remove NETFS_SREQ_SEEK_DATA_READ, NETFS_INVALID_WRITE,
   NETFS_ICTX_WRITETHROUGH, NETFS_READ_HOLE_CLEAR,
   NETFS_RREQ_DONT_UNLOCK_FOLIOS, and NETFS_RREQ_BLOCKED

 - Reorder structs to eliminate holes

 - Remove netfs_io_request::ractl

 - Only provide proc_link field if CONFIG_PROC_FS=y

 - Remove folio_queue::marks3

 - Fix undifferentiation of DIO reads from unbuffered reads

* tag 'vfs-6.16-rc1.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  netfs: Fix undifferentiation of DIO reads from unbuffered reads
  netfs: Fix wait/wake to be consistent about the waitqueue used
  netfs: Fix the request's work item to not require a ref
  netfs: Fix setting of transferred bytes with short DIO reads
  netfs: Fix oops in write-retry from mis-resetting the subreq iterator
  fs/netfs: remove unused flag NETFS_RREQ_BLOCKED
  fs/netfs: remove unused flag NETFS_RREQ_DONT_UNLOCK_FOLIOS
  folio_queue: remove unused field `marks3`
  fs/netfs: declare field `proc_link` only if CONFIG_PROC_FS=y
  fs/netfs: remove `netfs_io_request.ractl`
  fs/netfs: reorder struct fields to eliminate holes
  fs/netfs: remove unused enum choice NETFS_READ_HOLE_CLEAR
  fs/netfs: remove unused flag NETFS_ICTX_WRITETHROUGH
  fs/netfs: remove unused source NETFS_INVALID_WRITE
  fs/netfs: remove unused flag NETFS_SREQ_SEEK_DATA_READ

Pull automount updates from Al Viro:
 "Automount wart removal

  A bunch of odd boilerplate gone from instances - the reason for
  those was the need to protect the yet-to-be-attched mount from
  mark_mounts_for_expiry() deciding to take it out.

  But that's easy to detect and take care of in mark_mounts_for_expiry()
  itself; no need to have every instance simulate mount being busy by
  grabbing an extra reference to it, with finish_automount() undoing
  that once it attaches that mount.

  Should've done it that way from the very beginning... This is a
  flagday change, thankfully there are very few instances.

  vfs_submount() is gone - its sole remaining user (trace_automount)
  had been switched to saner primitives"

* tag 'pull-automount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  kill vfs_submount()
  saner calling conventions for ->d_automount()

Pull networking updates from Paolo Abeni:
 "Core:

   - Implement the Device Memory TCP transmit path, allowing zero-copy
     data transmission on top of TCP from e.g. GPU memory to the wire.

   - Move all the IPv6 routing tables management outside the RTNL scope,
     under its own lock and RCU. The route control path is now 3x times
     faster.

   - Convert queue related netlink ops to instance lock, reducing again
     the scope of the RTNL lock. This improves the control plane
     scalability.

   - Refactor the software crc32c implementation, removing unneeded
     abstraction layers and improving significantly the related
     micro-benchmarks.

   - Optimize the GRO engine for UDP-tunneled traffic, for a 10%
     performance improvement in related stream tests.

   - Cover more per-CPU storage with local nested BH locking; this is a
     prep work to remove the current per-CPU lock in local_bh_disable()
     on PREMPT_RT.

   - Introduce and use nlmsg_payload helper, combining buffer bounds
     verification with accessing payload carried by netlink messages.

  Netfilter:

   - Rewrite the procfs conntrack table implementation, improving
     considerably the dump performance. A lot of user-space tools still
     use this interface.

   - Implement support for wildcard netdevice in netdev basechain and
     flowtables.

   - Integrate conntrack information into nft trace infrastructure.

   - Export set count and backend name to userspace, for better
     introspection.

  BPF:

   - BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
     programs and can be controlled in similar way to traditional qdiscs
     using the "tc qdisc" command.

   - Refactor the UDP socket iterator, addressing long standing issues
     WRT duplicate hits or missed sockets.

  Protocols:

   - Improve TCP receive buffer auto-tuning and increase the default
     upper bound for the receive buffer; overall this improves the
     single flow maximum thoughput on 200Gbs link by over 60%.

   - Add AFS GSSAPI security class to AF_RXRPC; it provides transport
     security for connections to the AFS fileserver and VL server.

   - Improve TCP multipath routing, so that the sources address always
     matches the nexthop device.

   - Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
     and thus preventing DoS caused by passing around problematic FDs.

   - Retire DCCP socket. DCCP only receives updates for bugs, and major
     distros disable it by default. Its removal allows for better
     organisation of TCP fields to reduce the number of cache lines hit
     in the fast path.

   - Extend TCP drop-reason support to cover PAWS checks.

  Driver API:

   - Reorganize PTP ioctl flag support to require an explicit opt-in for
     the drivers, avoiding the problem of drivers not rejecting new
     unsupported flags.

   - Converted several device drivers to timestamping APIs.

   - Introduce per-PHY ethtool dump helpers, improving the support for
     dump operations targeting PHYs.

  Tests and tooling:

   - Add support for classic netlink in user space C codegen, so that
     ynl-c can now read, create and modify links, routes addresses and
     qdisc layer configuration.

   - Add ynl sub-types for binary attributes, allowing ynl-c to output
     known struct instead of raw binary data, clarifying the classic
     netlink output.

   - Extend MPTCP selftests to improve the code-coverage.

   - Add tests for XDP tail adjustment in AF_XDP.

  New hardware / drivers:

   - OpenVPN virtual driver: offload OpenVPN data channels processing to
     the kernel-space, increasing the data transfer throughput WRT the
     user-space implementation.

   - Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.

   - Broadcom asp-v3.0 ethernet driver.

   - AMD Renoir ethernet device.

   - ReakTek MT9888 2.5G ethernet PHY driver.

   - Aeonsemi 10G C45 PHYs driver.

  Drivers:

   - Ethernet high-speed NICs:
       - nVidia/Mellanox (mlx5):
           - refactor the steering table handling to significantly
             reduce the amount of memory used
           - add support for complex matches in H/W flow steering
           - improve flow streeing error handling
           - convert to netdev instance locking
       - Intel (100G, ice, igb, ixgbe, idpf):
           - ice: add switchdev support for LLDP traffic over VF
           - ixgbe: add firmware manipulation and regions devlink support
           - igb: introduce support for frame transmission premption
           - igb: adds persistent NAPI configuration
           - idpf: introduce RDMA support
           - idpf: add initial PTP support
       - Meta (fbnic):
           - extend hardware stats coverage
           - add devlink dev flash support
       - Broadcom (bnxt):
           - add support for RX-side device memory TCP
       - Wangxun (txgbe):
           - implement support for udp tunnel offload
           - complete PTP and SRIOV support for AML 25G/10G devices

   - Ethernet NICs embedded and virtual:
       - Google (gve):
           - add device memory TCP TX support
       - Amazon (ena):
           - support persistent per-NAPI config
       - Airoha:
           - add H/W support for L2 traffic offload
           - add per flow stats for flow offloading
       - RealTek (rtl8211): add support for WoL magic packet
       - Synopsys (stmmac):
           - dwmac-socfpga 1000BaseX support
           - add Loongson-2K3000 support
           - introduce support for hardware-accelerated VLAN stripping
       - Broadcom (bcmgenet):
           - expose more H/W stats
       - Freescale (enetc, dpaa2-eth):
           - enetc: add MAC filter, VLAN filter RSS and loopback support
           - dpaa2-eth: convert to H/W timestamping APIs
       - vxlan: convert FDB table to rhashtable, for better scalabilty
       - veth: apply qdisc backpressure on full ring to reduce TX drops

   - Ethernet switches:
       - Microchip (kzZ88x3): add ETS scheduler support

   - Ethernet PHYs:
       - RealTek (rtl8211):
           - add support for WoL magic packet
           - add support for PHY LEDs

   - CAN:
       - Adds RZ/G3E CANFD support to the rcar_canfd driver.
       - Preparatory work for CAN-XL support.
       - Add self-tests framework with support for CAN physical interfaces.

   - WiFi:
       - mac80211:
           - scan improvements with multi-link operation (MLO)
       - Qualcomm (ath12k):
           - enable AHB support for IPQ5332
           - add monitor interface support to QCN9274
           - add multi-link operation support to WCN7850
           - add 802.11d scan offload support to WCN7850
           - monitor mode for WCN7850, better 6 GHz regulatory
       - Qualcomm (ath11k):
           - restore hibernation support
       - MediaTek (mt76):
           - WiFi-7 improvements
           - implement support for mt7990
       - Intel (iwlwifi):
           - enhanced multi-link single-radio (EMLSR) support on 5 GHz links
           - rework device configuration
       - RealTek (rtw88):
           - improve throughput for RTL8814AU
       - RealTek (rtw89):
           - add multi-link operation support
           - STA/P2P concurrency improvements
           - support different SAR configs by antenna

   - Bluetooth:
       - introduce HCI Driver protocol
       - btintel_pcie: do not generate coredump for diagnostic events
       - btusb: add HCI Drv commands for configuring altsetting
       - btusb: add RTL8851BE device 0x0bda:0xb850
       - btusb: add new VID/PID 13d3/3584 for MT7922
       - btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
       - btnxpuart: implement host-wakeup feature"

* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
  selftests/bpf: Fix bpf selftest build warning
  selftests: netfilter: Fix skip of wildcard interface test
  net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
  net: openvswitch: Fix the dead loop of MPLS parse
  calipso: Don't call calipso functions for AF_INET sk.
  selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
  net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
  octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
  octeontx2-pf: QOS: Perform cache sync on send queue teardown
  net: mana: Add support for Multi Vports on Bare metal
  net: devmem: ncdevmem: remove unused variable
  net: devmem: ksft: upgrade rx test to send 1K data
  net: devmem: ksft: add 5 tuple FS support
  net: devmem: ksft: add exit_wait to make rx test pass
  net: devmem: ksft: add ipv4 support
  net: devmem: preserve sockc_err
  page_pool: fix ugly page_pool formatting
  net: devmem: move list_add to net_devmem_bind_dmabuf.
  selftests: netfilter: nft_queue.sh: include file transfer duration in log message
  net: phy: mscc: Fix memory leak when using one step timestamping
  ...

Pull vfs directory lookup updates from Christian Brauner:
 "This contains cleanups for the lookup_one*() family of helpers.

  We expose a set of functions with names containing "lookup_one_len"
  and others without the "_len". This difference has nothing to do with
  "len". It's rater a historical accident that can be confusing.

  The functions without "_len" take a "mnt_idmap" pointer. This is found
  in the "vfsmount" and that is an important question when choosing
  which to use: do you have a vfsmount, or are you "inside" the
  filesystem. A related question is "is permission checking relevant
  here?".

  nfsd and cachefiles *do* have a vfsmount but *don't* use the non-_len
  functions. They pass nop_mnt_idmap and refuse to work on filesystems
  which have any other idmap.

  This work changes nfsd and cachefile to use the lookup_one family of
  functions and to explictily pass &nop_mnt_idmap which is consistent
  with all other vfs interfaces used where &nop_mnt_idmap is explicitly
  passed.

  The remaining uses of the "_one" functions do not require permission
  checks so these are renamed to be "_noperm" and the permission
  checking is removed.

  This series also changes these lookup function to take a qstr instead
  of separate name and len. In many cases this simplifies the call"

* tag 'vfs-6.16-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  VFS: change lookup_one_common and lookup_noperm_common to take a qstr
  Use try_lookup_noperm() instead of d_hash_and_lookup() outside of VFS
  VFS: rename lookup_one_len family to lookup_noperm and remove permission check
  cachefiles: Use lookup_one() rather than lookup_one_len()
  nfsd: Use lookup_one() rather than lookup_one_len()
  VFS: improve interface for lookup_one functions

On cifs, "DIO reads" (specified by O_DIRECT) need to be differentiated from
"unbuffered reads" (specified by cache=none in the mount parameters).  The
difference is flagged in the protocol and the server may behave
differently: Windows Server will, for example, mandate that DIO reads are
block aligned.

Fix this by adding a NETFS_UNBUFFERED_READ to differentiate this from
NETFS_DIO_READ, parallelling the write differentiation that already exists.
cifs will then do the right thing.

Fixes: 016dc8516aec ("netfs: Implement unbuffered/DIO read support")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/3444961.1747987072@warthog.procyon.org.uk
Reviewed-by: "Paulo Alcantara (Red Hat)" <pc@manguebit.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
cc: Steve French <sfrench@samba.org>
cc: netfs@lists.linux.dev
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>

When the netfs_io_request struct's work item is queued, it must be supplied
with a ref to the work item struct to prevent it being deallocated whilst
on the queue or whilst it is being processed.  This is tricky to manage as
we have to get a ref before we try and queue it and then we may find it's
already queued and is thus already holding a ref - in which case we have to
try and get rid of the ref again.

The problem comes if we're in BH or IRQ context and need to drop the ref:
if netfs_put_request() reduces the count to 0, we have to do the cleanup -
but the cleanup may need to wait.

Fix this by adding a new work item to the request, ->cleanup_work, and
dispatching that when the refcount hits zero.  That can then synchronously
cancel any outstanding work on the main work item before doing the cleanup.

Adding a new work item also deals with another problem upstream where it's
sometimes changing the work func in the put function and requeuing it -
which has occasionally in the past caused the cleanup to happen
incorrectly.

As a bonus, this allows us to get rid of the 'was_async' parameter from a
bunch of functions.  This indicated whether the put function might not be
permitted to sleep.

Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250519090707.2848510-4-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Steve French <stfrench@microsoft.com>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>

Currently the calling conventions for ->d_automount() instances have
an odd wart - returned new mount to be attached is expected to have
refcount 2.

That kludge is intended to make sure that mark_mounts_for_expiry() called
before we get around to attaching that new mount to the tree won't decide
to take it out.  finish_automount() drops the extra reference after it's
done with attaching mount to the tree - or drops the reference twice in
case of error.  ->d_automount() instances have rather counterintuitive
boilerplate in them.

There's a much simpler approach: have mark_mounts_for_expiry() skip the
mounts that are yet to be mounted.  And to hell with grabbing/dropping
those extra references.  Makes for simpler correctness analysis, at that...

Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Acked-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Cross-merge networking fixes after downstream PR (net-6.15-rc3).

No conflicts. Adjacent changes:

tools/net/ynl/pyynl/ynl_gen_c.py
  4d07bbf2d456 ("tools: ynl-gen: don't declare loop iterator in place")
  7e8ba0c7de2b ("tools: ynl: don't use genlmsghdr in classic netlink")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>