linux.git/fs/afs, branch v4.14 Linux kernel source tree License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02T10:10:55+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2017-11-01T14:07:57+00:00 b24413180f5600bcb3bb70fbed5cf186b60864bd Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge branch 'akpm' (patches from Andrew) 2017-09-07T03:49:49+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-09-07T03:49:49+00:00 d34fc1adf01ff87026da85fb972dc259dc347540 Merge updates from Andrew Morton: - various misc bits - DAX updates - OCFS2 - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (119 commits) mm,fork: introduce MADV_WIPEONFORK x86,mpx: make mpx depend on x86-64 to free up VMA flag mm: add /proc/pid/smaps_rollup mm: hugetlb: clear target sub-page last when clearing huge page mm: oom: let oom_reap_task and exit_mmap run concurrently swap: choose swap device according to numa node mm: replace TIF_MEMDIE checks by tsk_is_oom_victim mm, oom: do not rely on TIF_MEMDIE for memory reserves access z3fold: use per-cpu unbuddied lists mm, swap: don't use VMA based swap readahead if HDD is used as swap mm, swap: add sysfs interface for VMA based swap readahead mm, swap: VMA based swap readahead mm, swap: fix swap readahead marking mm, swap: add swap readahead hit statistics mm/vmalloc.c: don't reinvent the wheel but use existing llist API mm/vmstat.c: fix wrong comment selftests/memfd: add memfd_create hugetlbfs selftest mm/shmem: add hugetlbfs support to memfd_create() mm, devm_memremap_pages: use multi-order radix for ZONE_DEVICE lookups mm/vmalloc.c: halve the number of comparisons performed in pcpu_get_vm_areas() ... 
Merge updates from Andrew Morton:

 - various misc bits

 - DAX updates

 - OCFS2

 - most of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (119 commits)
  mm,fork: introduce MADV_WIPEONFORK
  x86,mpx: make mpx depend on x86-64 to free up VMA flag
  mm: add /proc/pid/smaps_rollup
  mm: hugetlb: clear target sub-page last when clearing huge page
  mm: oom: let oom_reap_task and exit_mmap run concurrently
  swap: choose swap device according to numa node
  mm: replace TIF_MEMDIE checks by tsk_is_oom_victim
  mm, oom: do not rely on TIF_MEMDIE for memory reserves access
  z3fold: use per-cpu unbuddied lists
  mm, swap: don't use VMA based swap readahead if HDD is used as swap
  mm, swap: add sysfs interface for VMA based swap readahead
  mm, swap: VMA based swap readahead
  mm, swap: fix swap readahead marking
  mm, swap: add swap readahead hit statistics
  mm/vmalloc.c: don't reinvent the wheel but use existing llist API
  mm/vmstat.c: fix wrong comment
  selftests/memfd: add memfd_create hugetlbfs selftest
  mm/shmem: add hugetlbfs support to memfd_create()
  mm, devm_memremap_pages: use multi-order radix for ZONE_DEVICE lookups
  mm/vmalloc.c: halve the number of comparisons performed in pcpu_get_vm_areas()
  ...
fscache: remove unused ->now_uncached callback 2017-09-07T00:27:26+00:00 Jan Kara jack@suse.cz 2017-09-06T23:21:15+00:00 26b433d0da062d6e19d75350c0171d3cf8ff560d Patch series "Ranged pagevec lookup", v2. In this series I make pagevec_lookup() update the index (to be consistent with pagevec_lookup_tag() and also as a preparation for ranged lookups), provide ranged variant of pagevec_lookup() and use it in places where it makes sense. This not only removes some common code but is also a measurable performance win for some use cases (see patch 4/10) where radix tree is sparse and searching & grabing of a page after the end of the range has measurable overhead. This patch (of 10): The callback doesn't ever get called. Remove it. Link: http://lkml.kernel.org/r/20170726114704.7626-2-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Patch series "Ranged pagevec lookup", v2.

In this series I make pagevec_lookup() update the index (to be
consistent with pagevec_lookup_tag() and also as a preparation for
ranged lookups), provide ranged variant of pagevec_lookup() and use it
in places where it makes sense.  This not only removes some common code
but is also a measurable performance win for some use cases (see patch
4/10) where radix tree is sparse and searching & grabing of a page after
the end of the range has measurable overhead.

This patch (of 10):

The callback doesn't ever get called.  Remove it.

Link: http://lkml.kernel.org/r/20170726114704.7626-2-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2017-09-06T21:45:08+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-09-06T21:45:08+00:00 aae3dbb4776e7916b6cd442d00159bea27a695c1 Pull networking updates from David Miller: 1) Support ipv6 checksum offload in sunvnet driver, from Shannon Nelson. 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric Dumazet. 3) Allow generic XDP to work on virtual devices, from John Fastabend. 4) Add bpf device maps and XDP_REDIRECT, which can be used to build arbitrary switching frameworks using XDP. From John Fastabend. 5) Remove UFO offloads from the tree, gave us little other than bugs. 6) Remove the IPSEC flow cache, from Florian Westphal. 7) Support ipv6 route offload in mlxsw driver. 8) Support VF representors in bnxt_en, from Sathya Perla. 9) Add support for forward error correction modes to ethtool, from Vidya Sagar Ravipati. 10) Add time filter for packet scheduler action dumping, from Jamal Hadi Salim. 11) Extend the zerocopy sendmsg() used by virtio and tap to regular sockets via MSG_ZEROCOPY. From Willem de Bruijn. 12) Significantly rework value tracking in the BPF verifier, from Edward Cree. 13) Add new jump instructions to eBPF, from Daniel Borkmann. 14) Rework rtnetlink plumbing so that operations can be run without taking the RTNL semaphore. From Florian Westphal. 15) Support XDP in tap driver, from Jason Wang. 16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal. 17) Add Huawei hinic ethernet driver. 18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan Delalande. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits) i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq i40e: avoid NVM acquire deadlock during NVM update drivers: net: xgene: Remove return statement from void function drivers: net: xgene: Configure tx/rx delay for ACPI drivers: net: xgene: Read tx/rx delay for ACPI rocker: fix kcalloc parameter order rds: Fix non-atomic operation on shared flag variable net: sched: don't use GFP_KERNEL under spin lock vhost_net: correctly check tx avail during rx busy polling net: mdio-mux: add mdio_mux parameter to mdio_mux_init() rxrpc: Make service connection lookup always check for retry net: stmmac: Delete dead code for MDIO registration gianfar: Fix Tx flow control deactivation cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6 cxgb4: Fix pause frame count in t4_get_port_stats cxgb4: fix memory leak tun: rename generic_xdp to skb_xdp tun: reserve extra headroom only when XDP is set net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping net: dsa: bcm_sf2: Advertise number of egress queues ... 
Pull networking updates from David Miller:

 1) Support ipv6 checksum offload in sunvnet driver, from Shannon
    Nelson.

 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
    Dumazet.

 3) Allow generic XDP to work on virtual devices, from John Fastabend.

 4) Add bpf device maps and XDP_REDIRECT, which can be used to build
    arbitrary switching frameworks using XDP. From John Fastabend.

 5) Remove UFO offloads from the tree, gave us little other than bugs.

 6) Remove the IPSEC flow cache, from Florian Westphal.

 7) Support ipv6 route offload in mlxsw driver.

 8) Support VF representors in bnxt_en, from Sathya Perla.

 9) Add support for forward error correction modes to ethtool, from
    Vidya Sagar Ravipati.

10) Add time filter for packet scheduler action dumping, from Jamal Hadi
    Salim.

11) Extend the zerocopy sendmsg() used by virtio and tap to regular
    sockets via MSG_ZEROCOPY. From Willem de Bruijn.

12) Significantly rework value tracking in the BPF verifier, from Edward
    Cree.

13) Add new jump instructions to eBPF, from Daniel Borkmann.

14) Rework rtnetlink plumbing so that operations can be run without
    taking the RTNL semaphore. From Florian Westphal.

15) Support XDP in tap driver, from Jason Wang.

16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.

17) Add Huawei hinic ethernet driver.

18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
    Delalande.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
  i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
  i40e: avoid NVM acquire deadlock during NVM update
  drivers: net: xgene: Remove return statement from void function
  drivers: net: xgene: Configure tx/rx delay for ACPI
  drivers: net: xgene: Read tx/rx delay for ACPI
  rocker: fix kcalloc parameter order
  rds: Fix non-atomic operation on shared flag variable
  net: sched: don't use GFP_KERNEL under spin lock
  vhost_net: correctly check tx avail during rx busy polling
  net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
  rxrpc: Make service connection lookup always check for retry
  net: stmmac: Delete dead code for MDIO registration
  gianfar: Fix Tx flow control deactivation
  cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
  cxgb4: Fix pause frame count in t4_get_port_stats
  cxgb4: fix memory leak
  tun: rename generic_xdp to skb_xdp
  tun: reserve extra headroom only when XDP is set
  net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
  net: dsa: bcm_sf2: Advertise number of egress queues
  ...
rxrpc: Add notification of end-of-Tx phase 2017-08-29T09:55:20+00:00 David Howells dhowells@redhat.com 2017-08-29T09:18:56+00:00 e833251ad813168253fef9915aaf6a8c883337b0 Add a callback to rxrpc_kernel_send_data() so that a kernel service can get a notification that the AF_RXRPC call has transitioned out the Tx phase and is now waiting for a reply or a final ACK. This is called from AF_RXRPC with the call state lock held so the notification is guaranteed to come before any reply is passed back. Further, modify the AFS filesystem to make use of this so that we don't have to change the afs_call state before sending the last bit of data. Signed-off-by: David Howells <dhowells@redhat.com> 
Add a callback to rxrpc_kernel_send_data() so that a kernel service can get
a notification that the AF_RXRPC call has transitioned out the Tx phase and
is now waiting for a reply or a final ACK.

This is called from AF_RXRPC with the call state lock held so the
notification is guaranteed to come before any reply is passed back.

Further, modify the AFS filesystem to make use of this so that we don't have
to change the afs_call state before sending the last bit of data.

Signed-off-by: David Howells <dhowells@redhat.com>
fs: convert a pile of fsync routines to errseq_t based reporting 2017-08-01T12:39:29+00:00 Jeff Layton jlayton@redhat.com 2017-07-07T19:20:52+00:00 3b49c9a1e984b524142afc7536041d8c66877113 This patch converts most of the in-kernel filesystems that do writeback out of the pagecache to report errors using the errseq_t-based infrastructure that was recently added. This allows them to report errors once for each open file description. Most filesystems have a fairly straightforward fsync operation. They call filemap_write_and_wait_range to write back all of the data and wait on it, and then (sometimes) sync out the metadata. For those filesystems this is a straightforward conversion from calling filemap_write_and_wait_range in their fsync operation to calling file_write_and_wait_range. Acked-by: Jan Kara <jack@suse.cz> Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> 
This patch converts most of the in-kernel filesystems that do writeback
out of the pagecache to report errors using the errseq_t-based
infrastructure that was recently added. This allows them to report
errors once for each open file description.

Most filesystems have a fairly straightforward fsync operation. They
call filemap_write_and_wait_range to write back all of the data and
wait on it, and then (sometimes) sync out the metadata.

For those filesystems this is a straightforward conversion from calling
filemap_write_and_wait_range in their fsync operation to calling
file_write_and_wait_range.

Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
rxrpc: Move the packet.h include file into net/rxrpc/ 2017-07-21T10:00:20+00:00 David Howells dhowells@redhat.com 2017-07-21T09:07:10+00:00 ddc6c70f07bb1f6dd39a2c6c430f7b4fa95199c8 Move the protocol description header file into net/rxrpc/ and rename it to protocol.h. It's no longer necessary to expose it as packets are no longer exposed to kernel services (such as AFS) that use the facility. The abort codes are transferred to the UAPI header instead as we pass these back to userspace and also to kernel services. Signed-off-by: David Howells <dhowells@redhat.com> 
Move the protocol description header file into net/rxrpc/ and rename it to
protocol.h.  It's no longer necessary to expose it as packets are no longer
exposed to kernel services (such as AFS) that use the facility.

The abort codes are transferred to the UAPI header instead as we pass these
back to userspace and also to kernel services.

Signed-off-by: David Howells <dhowells@redhat.com>
Merge branch 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 2017-07-15T19:00:42+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-07-15T19:00:42+00:00 78dcf73421a879d22319d3889119945b85954a68 Pull ->s_options removal from Al Viro: "Preparations for fsmount/fsopen stuff (coming next cycle). Everything gets moved to explicit ->show_options(), killing ->s_options off + some cosmetic bits around fs/namespace.c and friends. Basically, the stuff needed to work with fsmount series with minimum of conflicts with other work. It's not strictly required for this merge window, but it would reduce the PITA during the coming cycle, so it would be nice to have those bits and pieces out of the way" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: isofs: Fix isofs_show_options() VFS: Kill off s_options and helpers orangefs: Implement show_options 9p: Implement show_options isofs: Implement show_options afs: Implement show_options affs: Implement show_options befs: Implement show_options spufs: Implement show_options bpf: Implement show_options ramfs: Implement show_options pstore: Implement show_options omfs: Implement show_options hugetlbfs: Implement show_options VFS: Don't use save/replace_mount_options if not using generic_show_options VFS: Provide empty name qstr VFS: Make get_filesystem() return the affected filesystem VFS: Clean up whitespace in fs/namespace.c and fs/super.c Provide a function to create a NUL-terminated string from unterminated data 
Pull ->s_options removal from Al Viro:
 "Preparations for fsmount/fsopen stuff (coming next cycle). Everything
  gets moved to explicit ->show_options(), killing ->s_options off +
  some cosmetic bits around fs/namespace.c and friends. Basically, the
  stuff needed to work with fsmount series with minimum of conflicts
  with other work.

  It's not strictly required for this merge window, but it would reduce
  the PITA during the coming cycle, so it would be nice to have those
  bits and pieces out of the way"

* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  isofs: Fix isofs_show_options()
  VFS: Kill off s_options and helpers
  orangefs: Implement show_options
  9p: Implement show_options
  isofs: Implement show_options
  afs: Implement show_options
  affs: Implement show_options
  befs: Implement show_options
  spufs: Implement show_options
  bpf: Implement show_options
  ramfs: Implement show_options
  pstore: Implement show_options
  omfs: Implement show_options
  hugetlbfs: Implement show_options
  VFS: Don't use save/replace_mount_options if not using generic_show_options
  VFS: Provide empty name qstr
  VFS: Make get_filesystem() return the affected filesystem
  VFS: Clean up whitespace in fs/namespace.c and fs/super.c
  Provide a function to create a NUL-terminated string from unterminated data
afs: Implement show_options 2017-07-11T10:06:18+00:00 David Howells dhowells@redhat.com 2017-07-05T15:25:23+00:00 677018a6ce620c8ca85abae1a07a41d66247d420 Implement the show_options superblock op for afs as part of a bid to get rid of s_options and generic_show_options() to make it easier to implement a context-based mount where the mount options can be passed individually over a file descriptor. Also implement the show_devname op to display the correct device name and thus avoid the need to display the cell= and volume= options. Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-afs@lists.infradead.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 
Implement the show_options superblock op for afs as part of a bid to get
rid of s_options and generic_show_options() to make it easier to implement
a context-based mount where the mount options can be passed individually
over a file descriptor.

Also implement the show_devname op to display the correct device name and thus
avoid the need to display the cell= and volume= options.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
afs: Add metadata xattrs 2017-07-09T21:40:12+00:00 David Howells dhowells@redhat.com 2017-07-06T14:50:27+00:00 d3e3b7eac886fb1383db2f22b81550fa6d87f62f Add xattrs to allow the user to get/set metadata in lieu of having pioctl() available. The following xattrs are now available: - "afs.cell" The name of the cell in which the vnode's volume resides. - "afs.fid" The volume ID, vnode ID and vnode uniquifier of the file as three hex numbers separated by colons. - "afs.volume" The name of the volume in which the vnode resides. For example: # getfattr -d -m ".*" /mnt/scratch getfattr: Removing leading '/' from absolute path names # file: mnt/scratch afs.cell="mycell.myorg.org" afs.fid="10000b:1:1" afs.volume="scratch" Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Add xattrs to allow the user to get/set metadata in lieu of having pioctl()
available.  The following xattrs are now available:

 - "afs.cell"

   The name of the cell in which the vnode's volume resides.

 - "afs.fid"

   The volume ID, vnode ID and vnode uniquifier of the file as three hex
   numbers separated by colons.

 - "afs.volume"

   The name of the volume in which the vnode resides.

For example:

	# getfattr -d -m ".*" /mnt/scratch
	getfattr: Removing leading '/' from absolute path names
	# file: mnt/scratch
	afs.cell="mycell.myorg.org"
	afs.fid="10000b:1:1"
	afs.volume="scratch"

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>