Pull ->s_options removal from Al Viro:
 "Preparations for fsmount/fsopen stuff (coming next cycle). Everything
  gets moved to explicit ->show_options(), killing ->s_options off +
  some cosmetic bits around fs/namespace.c and friends. Basically, the
  stuff needed to work with fsmount series with minimum of conflicts
  with other work.

  It's not strictly required for this merge window, but it would reduce
  the PITA during the coming cycle, so it would be nice to have those
  bits and pieces out of the way"

* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  isofs: Fix isofs_show_options()
  VFS: Kill off s_options and helpers
  orangefs: Implement show_options
  9p: Implement show_options
  isofs: Implement show_options
  afs: Implement show_options
  affs: Implement show_options
  befs: Implement show_options
  spufs: Implement show_options
  bpf: Implement show_options
  ramfs: Implement show_options
  pstore: Implement show_options
  omfs: Implement show_options
  hugetlbfs: Implement show_options
  VFS: Don't use save/replace_mount_options if not using generic_show_options
  VFS: Provide empty name qstr
  VFS: Make get_filesystem() return the affected filesystem
  VFS: Clean up whitespace in fs/namespace.c and fs/super.c
  Provide a function to create a NUL-terminated string from unterminated data

Implement the show_options superblock op for afs as part of a bid to get
rid of s_options and generic_show_options() to make it easier to implement
a context-based mount where the mount options can be passed individually
over a file descriptor.

Also implement the show_devname op to display the correct device name and thus
avoid the need to display the cell= and volume= options.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add xattrs to allow the user to get/set metadata in lieu of having pioctl()
available.  The following xattrs are now available:

 - "afs.cell"

   The name of the cell in which the vnode's volume resides.

 - "afs.fid"

   The volume ID, vnode ID and vnode uniquifier of the file as three hex
   numbers separated by colons.

 - "afs.volume"

   The name of the volume in which the vnode resides.

For example:

	# getfattr -d -m ".*" /mnt/scratch
	getfattr: Removing leading '/' from absolute path names
	# file: mnt/scratch
	afs.cell="mycell.myorg.org"
	afs.fid="10000b:1:1"
	afs.volume="scratch"

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The AFS_ACE_READ and AFS_ACE_WRITE permission bits should not
be used to make access decisions for the directory itself.  They
are meant to control access for the objects contained in that
directory.

Reading a directory is allowed if the AFS_ACE_LOOKUP bit is set.
This would cause an incorrect access denied error for a directory
with AFS_ACE_LOOKUP but not AFS_ACE_READ.

The AFS_ACE_WRITE bit does not allow operations that modify the
directory.  For a directory with AFS_ACE_WRITE but neither
AFS_ACE_INSERT nor AFS_ACE_DELETE, this would result in trying
operations that would ultimately be denied by the server.

Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking updates from David Miller:
 "Reasonably busy this cycle, but perhaps not as busy as in the 4.12
  merge window:

   1) Several optimizations for UDP processing under high load from
      Paolo Abeni.

   2) Support pacing internally in TCP when using the sch_fq packet
      scheduler for this is not practical. From Eric Dumazet.

   3) Support mutliple filter chains per qdisc, from Jiri Pirko.

   4) Move to 1ms TCP timestamp clock, from Eric Dumazet.

   5) Add batch dequeueing to vhost_net, from Jason Wang.

   6) Flesh out more completely SCTP checksum offload support, from
      Davide Caratti.

   7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
      Neira Ayuso, and Matthias Schiffer.

   8) Add devlink support to nfp driver, from Simon Horman.

   9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
      Prabhu.

  10) Add stack depth tracking to BPF verifier and use this information
      in the various eBPF JITs. From Alexei Starovoitov.

  11) Support XDP on qed device VFs, from Yuval Mintz.

  12) Introduce BPF PROG ID for better introspection of installed BPF
      programs. From Martin KaFai Lau.

  13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.

  14) For loads, allow narrower accesses in bpf verifier checking, from
      Yonghong Song.

  15) Support MIPS in the BPF selftests and samples infrastructure, the
      MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
      Daney.

  16) Support kernel based TLS, from Dave Watson and others.

  17) Remove completely DST garbage collection, from Wei Wang.

  18) Allow installing TCP MD5 rules using prefixes, from Ivan
      Delalande.

  19) Add XDP support to Intel i40e driver, from Björn Töpel

  20) Add support for TC flower offload in nfp driver, from Simon
      Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
      Kicinski, and Bert van Leeuwen.

  21) IPSEC offloading support in mlx5, from Ilan Tayari.

  22) Add HW PTP support to macb driver, from Rafal Ozieblo.

  23) Networking refcount_t conversions, From Elena Reshetova.

  24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
      for tuning the TCP sockopt settings of a group of applications,
      currently via CGROUPs"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
  net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
  dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
  cxgb4: Support for get_ts_info ethtool method
  cxgb4: Add PTP Hardware Clock (PHC) support
  cxgb4: time stamping interface for PTP
  nfp: default to chained metadata prepend format
  nfp: remove legacy MAC address lookup
  nfp: improve order of interfaces in breakout mode
  net: macb: remove extraneous return when MACB_EXT_DESC is defined
  bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
  bpf: fix return in load_bpf_file
  mpls: fix rtm policy in mpls_getroute
  net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
  net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
  ...

Provide a control message that can be specified on the first sendmsg() of a
client call or the first sendmsg() of a service response to indicate the
total length of the data to be transmitted for that call.

Currently, because the length of the payload of an encrypted DATA packet is
encrypted in front of the data, the packet cannot be encrypted until we
know how much data it will hold.

By specifying the length at the beginning of the transmit phase, each DATA
packet length can be set before we start loading data from userspace (where
several sendmsg() calls may contribute to a particular packet).

An error will be returned if too little or too much data is presented in
the Tx phase.

Signed-off-by: David Howells <dhowells@redhat.com>

This essentially is a partial revert of commit ff548773
("afs: Move UUID struct to linux/uuid.h") and moves struct uuid_v1 back into
fs/afs as struct afs_uuid.  It however keeps it as big endian structure
so that we can use the normal uuid generation helpers when casting to/from
struct afs_uuid.

The V1 uuid intrepretation in struct form isn't really useful to the
rest of the kernel, and not really compatible to it either, so move it
back to AFS instead of polluting the global uuid.h.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Howells <dhowells@redhat.com>

Pull networking updates from David Millar:
 "Here are some highlights from the 2065 networking commits that
  happened this development cycle:

   1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)

   2) Add a generic XDP driver, so that anyone can test XDP even if they
      lack a networking device whose driver has explicit XDP support
      (me).

   3) Sparc64 now has an eBPF JIT too (me)

   4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
      Starovoitov)

   5) Make netfitler network namespace teardown less expensive (Florian
      Westphal)

   6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)

   7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)

   8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)

   9) Multiqueue support in stmmac driver (Joao Pinto)

  10) Remove TCP timewait recycling, it never really could possibly work
      well in the real world and timestamp randomization really zaps any
      hint of usability this feature had (Soheil Hassas Yeganeh)

  11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
      Aleksandrov)

  12) Add socket busy poll support to epoll (Sridhar Samudrala)

  13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
      and several others)

  14) IPSEC hw offload infrastructure (Steffen Klassert)"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
  tipc: refactor function tipc_sk_recv_stream()
  tipc: refactor function tipc_sk_recvmsg()
  net: thunderx: Optimize page recycling for XDP
  net: thunderx: Support for XDP header adjustment
  net: thunderx: Add support for XDP_TX
  net: thunderx: Add support for XDP_DROP
  net: thunderx: Add basic XDP support
  net: thunderx: Cleanup receive buffer allocation
  net: thunderx: Optimize CQE_TX handling
  net: thunderx: Optimize RBDR descriptor handling
  net: thunderx: Support for page recycling
  ipx: call ipxitf_put() in ioctl error path
  net: sched: add helpers to handle extended actions
  qed*: Fix issues in the ptp filter config implementation.
  qede: Fix concurrency issue in PTP Tx path processing.
  stmmac: Add support for SIMATIC IOT2000 platform
  net: hns: fix ethtool_get_strings overflow in hns driver
  tcp: fix wraparound issue in tcp_lp
  bpf, arm64: fix jit branch offset related to ldimm64
  bpf, arm64: implement jiting of BPF_XADD
  ...

Allocate struct backing_dev_info separately instead of embedding it
inside the superblock. This unifies handling of bdi among users.

CC: David Howells <dhowells@redhat.com>
CC: linux-afs@lists.infradead.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>

Use negative error codes in struct rxrpc_call::error because that's what
the kernel normally deals with and to make the code consistent.  We only
turn them positive when transcribing into a cmsg for userspace recvmsg.

Signed-off-by: David Howells <dhowells@redhat.com>