Pull vfs mount infrastructure updates from Al Viro:
 "The rest of core infrastructure; no new syscalls in that pile, but the
  old parts are switched to new infrastructure. At that point
  conversions of individual filesystems can happen independently; some
  are done here (afs, cgroup, procfs, etc.), there's also a large series
  outside of that pile dealing with NFS (quite a bit of option-parsing
  stuff is getting used there - it's one of the most convoluted
  filesystems in terms of mount-related logics), but NFS bits are the
  next cycle fodder.

  It got seriously simplified since the last cycle; documentation is
  probably the weakest bit at the moment - I considered dropping the
  commit introducing Documentation/filesystems/mount_api.txt (cutting
  the size increase by quarter ;-), but decided that it would be better
  to fix it up after -rc1 instead.

  That pile allows to do followup work in independent branches, which
  should make life much easier for the next cycle. fs/super.c size
  increase is unpleasant; there's a followup series that allows to
  shrink it considerably, but I decided to leave that until the next
  cycle"

* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (41 commits)
  afs: Use fs_context to pass parameters over automount
  afs: Add fs_context support
  vfs: Add some logging to the core users of the fs_context log
  vfs: Implement logging through fs_context
  vfs: Provide documentation for new mount API
  vfs: Remove kern_mount_data()
  hugetlbfs: Convert to fs_context
  cpuset: Use fs_context
  kernfs, sysfs, cgroup, intel_rdt: Support fs_context
  cgroup: store a reference to cgroup_ns into cgroup_fs_context
  cgroup1_get_tree(): separate "get cgroup_root to use" into a separate helper
  cgroup_do_mount(): massage calling conventions
  cgroup: stash cgroup_root reference into cgroup_fs_context
  cgroup2: switch to option-by-option parsing
  cgroup1: switch to option-by-option parsing
  cgroup: take options parsing into ->parse_monolithic()
  cgroup: fold cgroup1_mount() into cgroup1_get_tree()
  cgroup: start switching to fs_context
  ipc: Convert mqueue fs to fs_context
  proc: Add fs_context support to procfs
  ...

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
  hisi_sas, target/iscsi and target/core.

  Additionally Christoph refactored gdth as part of the dma changes. The
  major mid-layer change this time is the removal of bidi commands and
  with them the whole of the osd/exofs driver and filesystem. This is a
  major simplification for block and mq in particular"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits)
  scsi: cxgb4i: validate tcp sequence number only if chip version <= T5
  scsi: cxgb4i: get pf number from lldi->pf
  scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
  scsi: mpt3sas: Add missing breaks in switch statements
  scsi: aacraid: Fix missing break in switch statement
  scsi: kill command serial number
  scsi: csiostor: drop serial_number usage
  scsi: mvumi: use request tag instead of serial_number
  scsi: dpt_i2o: remove serial number usage
  scsi: st: osst: Remove negative constant left-shifts
  scsi: ufs-bsg: Allow reading descriptors
  scsi: ufs: Allow reading descriptor via raw upiu
  scsi: ufs-bsg: Change the calling convention for write descriptor
  scsi: ufs: Remove unused device quirks
  Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  scsi: megaraid_sas: Remove a bunch of set but not used variables
  scsi: clean obsolete return values of eh_timed_out
  scsi: sd: Optimal I/O size should be a multiple of physical block size
  scsi: MAINTAINERS: SCSI initiator and target tweaks
  scsi: fcoe: make use of fip_mode enum complete
  ...

Pull io_uring IO interface from Jens Axboe:
 "Second attempt at adding the io_uring interface.

  Since the first one, we've added basic unit testing of the three
  system calls, that resides in liburing like the other unit tests that
  we have so far. It'll take a while to get full coverage of it, but
  we're working towards it. I've also added two basic test programs to
  tools/io_uring. One uses the raw interface and has support for all the
  various features that io_uring supports outside of standard IO, like
  fixed files, fixed IO buffers, and polled IO. The other uses the
  liburing API, and is a simplified version of cp(1).

  This adds support for a new IO interface, io_uring.

  io_uring allows an application to communicate with the kernel through
  two rings, the submission queue (SQ) and completion queue (CQ) ring.
  This allows for very efficient handling of IOs, see the v5 posting for
  some basic numbers:

    https://lore.kernel.org/linux-block/20190116175003.17880-1-axboe@kernel.dk/

  Outside of just efficiency, the interface is also flexible and
  extendable, and allows for future use cases like the upcoming NVMe
  key-value store API, networked IO, and so on. It also supports async
  buffered IO, something that we've always failed to support in the
  kernel.

  Outside of basic IO features, it supports async polled IO as well.
  This particular feature has already been tested at Facebook months ago
  for flash storage boxes, with 25-33% improvements. It makes polled IO
  actually useful for real world use cases, where even basic flash sees
  a nice win in terms of efficiency, latency, and performance. These
  boxes were IOPS bound before, now they are not.

  This series adds three new system calls. One for setting up an
  io_uring instance (io_uring_setup(2)), one for submitting/completing
  IO (io_uring_enter(2)), and one for aux functions like registrating
  file sets, buffers, etc (io_uring_register(2)). Through the help of
  Arnd, I've coordinated the syscall numbers so merge on that front
  should be painless.

  Jon did a writeup of the interface a while back, which (except for
  minor details that have been tweaked) is still accurate. Find that
  here:

    https://lwn.net/Articles/776703/

  Huge thanks to Al Viro for helping getting the reference cycle code
  correct, and to Jann Horn for his extensive reviews focused on both
  security and bugs in general.

  There's a userspace library that provides basic functionality for
  applications that don't need or want to care about how to fiddle with
  the rings directly. It has helpers to allow applications to easily set
  up an io_uring instance, and submit/complete IO through it without
  knowing about the intricacies of the rings. It also includes man pages
  (thanks to Jeff Moyer), and will continue to grow support helper
  functions and features as time progresses. Find it here:

    git://git.kernel.dk/liburing

  Fio has full support for the raw interface, both in the form of an IO
  engine (io_uring), but also with a small test application (t/io_uring)
  that can exercise and benchmark the interface"

* tag 'io_uring-2019-03-06' of git://git.kernel.dk/linux-block:
  io_uring: add a few test tools
  io_uring: allow workqueue item to handle multiple buffered requests
  io_uring: add support for IORING_OP_POLL
  io_uring: add io_kiocb ref count
  io_uring: add submission polling
  io_uring: add file set registration
  net: split out functions related to registering inflight socket files
  io_uring: add support for pre-mapped user IO buffers
  block: implement bio helper to add iter bvec pages to bio
  io_uring: batch io_kiocb allocation
  io_uring: use fget/fput_many() for file references
  fs: add fget_many() and fput_many()
  io_uring: support for IO polling
  io_uring: add fsync support
  Add io_uring IO interface

The submission queue (SQ) and completion queue (CQ) rings are shared
between the application and the kernel. This eliminates the need to
copy data back and forth to submit and complete IO.

IO submissions use the io_uring_sqe data structure, and completions
are generated in the form of io_uring_cqe data structures. The SQ
ring is an index into the io_uring_sqe array, which makes it possible
to submit a batch of IOs without them being contiguous in the ring.
The CQ ring is always contiguous, as completion events are inherently
unordered, and hence any io_uring_cqe entry can point back to an
arbitrary submission.

Two new system calls are added for this:

io_uring_setup(entries, params)
	Sets up an io_uring instance for doing async IO. On success,
	returns a file descriptor that the application can mmap to
	gain access to the SQ ring, CQ ring, and io_uring_sqes.

io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize)
	Initiates IO against the rings mapped to this fd, or waits for
	them to complete, or both. The behavior is controlled by the
	parameters passed in. If 'to_submit' is non-zero, then we'll
	try and submit new IO. If IORING_ENTER_GETEVENTS is set, the
	kernel will wait for 'min_complete' events, if they aren't
	already available. It's valid to set IORING_ENTER_GETEVENTS
	and 'min_complete' == 0 at the same time, this allows the
	kernel to return already completed events without waiting
	for them. This is useful only for polling, as for IRQ
	driven IO, the application can just check the CQ ring
	without entering the kernel.

With this setup, it's possible to do async IO with a single system
call. Future developments will enable polled IO with this interface,
and polled submission as well. The latter will enable an application
to do IO without doing ANY system calls at all.

For IRQ driven IO, an application only needs to enter the kernel for
completions if it wants to wait for them to occur.

Each io_uring is backed by a workqueue, to support buffered async IO
as well. We will only punt to an async context if the command would
need to wait for IO on the device side. Any data that can be accessed
directly in the page cache is done inline. This avoids the slowness
issue of usual threadpools, since cached data is accessed as quickly
as a sync interface.

Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Because the new API passes in key,value parameters, match_token() cannot be
used with it.  Instead, provide three new helpers to aid with parsing:

 (1) fs_parse().  This takes a parameter and a simple static description of
     all the parameters and maps the key name to an ID.  It returns 1 on a
     match, 0 on no match if unknowns should be ignored and some other
     negative error code on a parse error.

     The parameter description includes a list of key names to IDs, desired
     parameter types and a list of enumeration name -> ID mappings.

     [!] Note that for the moment I've required that the key->ID mapping
     array is expected to be sorted and unterminated.  The size of the
     array is noted in the fsconfig_parser struct.  This allows me to use
     bsearch(), but I'm not sure any performance gain is worth the hassle
     of requiring people to keep the array sorted.

     The parameter type array is sized according to the number of parameter
     IDs and is indexed directly.  The optional enum mapping array is an
     unterminated, unsorted list and the size goes into the fsconfig_parser
     struct.

     The function can do some additional things:

	(a) If it's not ambiguous and no value is given, the prefix "no" on
	    a key name is permitted to indicate that the parameter should
	    be considered negatory.

	(b) If the desired type is a single simple integer, it will perform
	    an appropriate conversion and store the result in a union in
	    the parse result.

	(c) If the desired type is an enumeration, {key ID, name} will be
	    looked up in the enumeration list and the matching value will
	    be stored in the parse result union.

	(d) Optionally generate an error if the key is unrecognised.

     This is called something like:

	enum rdt_param {
		Opt_cdp,
		Opt_cdpl2,
		Opt_mba_mpbs,
		nr__rdt_params
	};

	const struct fs_parameter_spec rdt_param_specs[nr__rdt_params] = {
		[Opt_cdp]	= { fs_param_is_bool },
		[Opt_cdpl2]	= { fs_param_is_bool },
		[Opt_mba_mpbs]	= { fs_param_is_bool },
	};

	const const char *const rdt_param_keys[nr__rdt_params] = {
		[Opt_cdp]	= "cdp",
		[Opt_cdpl2]	= "cdpl2",
		[Opt_mba_mpbs]	= "mba_mbps",
	};

	const struct fs_parameter_description rdt_parser = {
		.name		= "rdt",
		.nr_params	= nr__rdt_params,
		.keys		= rdt_param_keys,
		.specs		= rdt_param_specs,
		.no_source	= true,
	};

	int rdt_parse_param(struct fs_context *fc,
			    struct fs_parameter *param)
	{
		struct fs_parse_result parse;
		struct rdt_fs_context *ctx = rdt_fc2context(fc);
		int ret;

		ret = fs_parse(fc, &rdt_parser, param, &parse);
		if (ret < 0)
			return ret;

		switch (parse.key) {
		case Opt_cdp:
			ctx->enable_cdpl3 = true;
			return 0;
		case Opt_cdpl2:
			ctx->enable_cdpl2 = true;
			return 0;
		case Opt_mba_mpbs:
			ctx->enable_mba_mbps = true;
			return 0;
		}

		return -EINVAL;
	}

 (2) fs_lookup_param().  This takes a { dirfd, path, LOOKUP_EMPTY? } or
     string value and performs an appropriate path lookup to convert it
     into a path object, which it will then return.

     If the desired type was a blockdev, the type of the looked up inode
     will be checked to make sure it is one.

     This can be used like:

	enum foo_param {
		Opt_source,
		nr__foo_params
	};

	const struct fs_parameter_spec foo_param_specs[nr__foo_params] = {
		[Opt_source]	= { fs_param_is_blockdev },
	};

	const char *char foo_param_keys[nr__foo_params] = {
		[Opt_source]	= "source",
	};

	const struct constant_table foo_param_alt_keys[] = {
		{ "device",	Opt_source },
	};

	const struct fs_parameter_description foo_parser = {
		.name		= "foo",
		.nr_params	= nr__foo_params,
		.nr_alt_keys	= ARRAY_SIZE(foo_param_alt_keys),
		.keys		= foo_param_keys,
		.alt_keys	= foo_param_alt_keys,
		.specs		= foo_param_specs,
	};

	int foo_parse_param(struct fs_context *fc,
			    struct fs_parameter *param)
	{
		struct fs_parse_result parse;
		struct foo_fs_context *ctx = foo_fc2context(fc);
		int ret;

		ret = fs_parse(fc, &foo_parser, param, &parse);
		if (ret < 0)
			return ret;

		switch (parse.key) {
		case Opt_source:
			return fs_lookup_param(fc, &foo_parser, param,
					       &parse, &ctx->source);
		default:
			return -EINVAL;
		}
	}

 (3) lookup_constant().  This takes a table of named constants and looks up
     the given name within it.  The table is expected to be sorted such
     that bsearch() be used upon it.

     Possibly I should require the table be terminated and just use a
     for-loop to scan it instead of using bsearch() to reduce hassle.

     Tables look something like:

	static const struct constant_table bool_names[] = {
		{ "0",		false },
		{ "1",		true },
		{ "false",	false },
		{ "no",		false },
		{ "true",	true },
		{ "yes",	true },
	};

     and a lookup is done with something like:

	b = lookup_constant(bool_names, param->string, -1);

Additionally, optional validation routines for the parameter description
are provided that can be enabled at compile time.  A later patch will
invoke these when a filesystem is registered.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

This was an example for using the SCSI OSD protocol, which we're trying
to remove.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Introduce a filesystem context concept to be used during superblock
creation for mount and superblock reconfiguration for remount.  This is
allocated at the beginning of the mount procedure and into it is placed:

 (1) Filesystem type.

 (2) Namespaces.

 (3) Source/Device names (there may be multiple).

 (4) Superblock flags (SB_*).

 (5) Security details.

 (6) Filesystem-specific data, as set by the mount options.

Accessor functions are then provided to set up a context, parameterise it
from monolithic mount data (the data page passed to mount(2)) and tear it
down again.

A legacy wrapper is provided that implements what will be the basic
operations, wrapping access to filesystems that aren't yet aware of the
fs_context.

Finally, vfs_kern_mount() is changed to make use of the fs_context and
mount_fs() is replaced by vfs_get_tree(), called from vfs_kern_mount().
[AV -- add missing kstrdup()]
[AV -- put_cred() can be unconditional - fc->cred can't be NULL]
[AV -- take legacy_validate() contents into legacy_parse_monolithic()]
[AV -- merge KERNEL_MOUNT and USER_MOUNT]
[AV -- don't unlock superblock on success return from vfs_get_tree()]
[AV -- kill 'reference' argument of init_fs_context()]

Signed-off-by: David Howells <dhowells@redhat.com>
Co-developed-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Many file systems use a copy&paste implementation
of dirent to on-disk file type conversions.

Create a common implementation to be used by file systems
with some useful conversion helpers to reduce open coded
file type conversions in file system code.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Jan Kara <jack@suse.cz>

There's no need to retain the fs/autofs4 directory for backward
compatibility.

Adding an AUTOFS4_FS fragment to the autofs Kconfig and a module alias
for autofs4 is sufficient for almost all cases. Not keeping fs/autofs4
remnants will prevent "insmod <path>/autofs4/autofs4.ko" from working
but this shouldn't be used in automation scripts rather than
modprobe(8).

There were some comments about things to look out for with the module
rename in the fs/autofs4/Kconfig that is removed by this patch, see the
commit patch if you are interested.

One potential problem with this change is that when the
fs/autofs/Kconfig fragment for AUTOFS4_FS is removed any AUTOFS4_FS
entries will be removed from the kernel config, resulting in no autofs
file system being built if there is no AUTOFS_FS entry also.

This would have also happened if the fs/autofs4 remnants had remained
and is most likely to be a problem with automated builds.

Please check your build configurations before the removal which will
occur after the next couple of kernel releases.

Acked-by: Ian Kent <raven@themaw.net>
[ With edits and commit message from Ian Kent ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Create Makefile and Kconfig for autofs module.

[raven@themaw.net: make autofs4 Kconfig depend on AUTOFS_FS]
  Link: http://lkml.kernel.org/r/152687649097.8263.7046086367407522029.stgit@pluto.themaw.net
Link: http://lkml.kernel.org/r/152626705591.28589.356365986974038383.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>