Pull char / misc driver fixes from Greg KH:
 "Here are some small char/misc and other driver fixes for 6.9-rc5.
  Included in here are the following:

   - binder driver fix for reported problem

   - speakup crash fix

   - mei driver fixes for reported problems

   - comdei driver fix

   - interconnect driver fixes

   - rtsx driver fix

   - peci.h kernel doc fix

  All of these have been in linux-next for over a week with no reported
  problems"

* tag 'char-misc-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  peci: linux/peci.h: fix Excess kernel-doc description warning
  binder: check offset alignment in binder_get_object()
  comedi: vmk80xx: fix incomplete endpoint checking
  mei: vsc: Unregister interrupt handler for system suspend
  Revert "mei: vsc: Call wake_up() in the threaded IRQ handler"
  misc: rtsx: Fix rts5264 driver status incorrect when card removed
  mei: me: disable RPL-S on SPS and IGN firmwares
  speakup: Avoid crash on very long word
  interconnect: Don't access req_list while it's being manipulated
  interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.9-rc5 that
  resolve a bunch of reported problems. Included in here are:

   - MAINTAINERS and .mailmap update for Richard Genoud

   - serial core regression fixes from 6.9-rc1 changes

   - pci id cleanups

   - serial core crash fix

   - stm32 driver fixes

   - 8250 driver fixes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: stm32: Reset .throttled state in .startup()
  serial: stm32: Return IRQ_NONE in the ISR if no handling happend
  serial: core: Fix missing shutdown and startup for serial base port
  serial: core: Clearing the circular buffer before NULLifying it
  MAINTAINERS: mailmap: update Richard Genoud's email address
  serial/pmac_zilog: Remove flawed mitigation for rx irq flood
  serial: 8250_pci: Remove redundant PCI IDs
  serial: core: Fix regression when runtime PM is not enabled
  serial: mxs-auart: add spinlock around changing cts state
  serial: 8250_dw: Revert: Do not reclock if already at correct rate
  serial: 8250_lpc18xx: disable clks on error in probe()

Pull USB / Thunderbolt driver fixes from Greg KH:
 "Here are some small USB and Thunderbolt driver fixes for 6.9-rc5.
  Included in here are:

   - MAINTAINER file update for invalid email address

   - usb-serial device id updates

   - typec driver fixes

   - thunderbolt / usb4 driver fixes

   - usb core shutdown fixes

   - cdc-wdm driver revert for reported problem in -rc1

   - usb gadget driver fixes

   - xhci driver fixes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'usb-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
  USB: serial: option: add Telit FN920C04 rmnet compositions
  usb: dwc3: ep0: Don't reset resource alloc flag
  Revert "usb: cdc-wdm: close race between read and workqueue"
  USB: serial: option: add Rolling RW101-GL and RW135-GL support
  USB: serial: option: add Lonsung U8300/U9300 product
  USB: serial: option: add support for Fibocom FM650/FG650
  USB: serial: option: support Quectel EM060K sub-models
  USB: serial: option: add Fibocom FM135-GL variants
  usb: misc: onboard_usb_hub: Disable the USB hub clock on failure
  thunderbolt: Avoid notify PM core about runtime PM resume
  thunderbolt: Fix wake configurations after device unplug
  usb: dwc2: host: Fix dereference issue in DDMA completion flow.
  usb: typec: mux: it5205: Fix ChipID value typo
  MAINTAINERS: Drop Li Yang as their email address stopped working
  usb: gadget: fsl: Initialize udc before using it
  usb: Disable USB3 LPM at shutdown
  usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error
  usb: typec: tcpm: Correct the PDO counting in pd_set
  usb: gadget: functionfs: Wait for fences before enqueueing DMABUF
  usb: gadget: functionfs: Fix inverted DMA fence direction
  ...

Pull clk fixes from Stephen Boyd:
 "A couple clk driver fixes, a build fix, and a deadlock fix:

   - Mediatek mt7988 has broken PCIe because the wrong parent is used

   - Mediatek clk drivers may deadlock when registering their clks
     because the clk provider device is repeatedly runtime PM resumed
     and suspended during probe and clk registration.

     Resuming the clk provider device deadlocks with an ABBA deadlock
     due to genpd_lock and the clk prepare_lock. The fix is to keep the
     device runtime resumed while registering clks.

   - Another runtime PM related deadlock, this time with disabling
     unused clks during late init.

     We get an ABBA deadlock where a device is runtime PM resuming (or
     suspending) while the disabling of unused clks is happening in
     parallel. That runtime PM action calls into the clk framework and
     tries to grab the clk prepare_lock while the disabling of unused
     clks holds the prepare_lock and is waiting for that runtime PM
     action to complete.

     The fix is to runtime resume all the clk provider devices before
     grabbing the clk prepare_lock during disable unused.

   - A build fix to provide an empty devm_clk_rate_exclusive_get()
     function when CONFIG_COMMON_CLK=n"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: mediatek: mt7988-infracfg: fix clocks for 2nd PCIe port
  clk: mediatek: Do a runtime PM get on controllers during probe
  clk: Get runtime PM before walking tree for clk_summary
  clk: Get runtime PM before walking tree during disable_unused
  clk: Initialize struct clk_core kref earlier
  clk: Don't hold prepare_lock when calling kref_put()
  clk: Remove prepare_lock hold assertion in __clk_release()
  clk: Provide !COMMON_CLK dummy for devm_clk_rate_exclusive_get()

Pull iommufd fixes from Jason Gunthorpe:
 "Two fixes for the selftests:

   - CONFIG_IOMMUFD_TEST needs CONFIG_IOMMUFD_DRIVER to work

   - The kconfig fragment sshould include fault injection so the fault
     injection test can work"

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
  iommufd: Add config needed for iommufd_fail_nth
  iommufd: Add missing IOMMUFD_DRIVER kconfig for the selftest

Pull rdma fixes from Jason Gunthorpe:

 - Add a missing mutex_destroy() in rxe

 - Enhance the debugging print for cm_destroy failures to help debug
   these

 - Fix mlx5 MAD processing in cases where multiport devices are running
   in switchedev mode

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/mlx5: Fix port number for counter query in multi-port configuration
  RDMA/cm: Print the old state when cm_destroy_id gets timeout
  RDMA/rxe: Fix the problem "mutex_destroy missing"

Pull s390 updates from Alexander Gordeev:

 - Fix NULL pointer dereference in program check handler

 - Fake IRBs are important events relevant for problem analysis. Add
   traces when queueing and delivering

 - Fix a race condition in ccw_device_set_online() that can cause the
   online process to fail

 - Deferred condition code 1 response indicates that I/O was not started
   and should be retried. The current QDIO implementation handles a cc1
   response as an error, resulting in a failed QDIO setup. Fix that by
   retrying the setup when a cc1 response is received

* tag 's390-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/mm: Fix NULL pointer dereference
  s390/cio: log fake IRB events
  s390/cio: fix race condition during online processing
  s390/qdio: handle deferred cc1

Pull thermal control fix from Rafael Wysocki:
 "This prevents the thermal debug code from attempting to divide by zero
  and corrects trip point statistics (Rafael Wysocki)"

* tag 'thermal-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/debugfs: Add missing count increment to thermal_debug_tz_trip_up()

Pull drm fixes from Dave Airlie:
 "Regular week of fixes, seems to be about right for this time in the
  release cycle, amdgpu, and nouveau are the main one with some
  scattered fixes otherwise.

  ttm:
   - Stop pooling cached NUMA pages

  amdgpu:
   - Fix invalid resource->start check
   - USB-C DSC fix
   - Fix a potential UAF in VA IOCTL
   - Fix visible VRAM handling during faults

  amdkfd:
   - Fix memory leak in create_process failure

  radeon:
   - Silence UBSAN warnings from variable sized arrays

  nouveau:
   - dp: Don't probe DP ports twice
   - nv04: Fix OOB access
   - nv50: Disable AUX bus for disconnected DP ports
   - nvkm: Fix instmem race condition

  panel:
   - Don't unregister DSI devices in several drivers

  v3d:
   - Fix enabled_ns increment

  xe:
   - Fix bo leak on error path during fb init
   - Fix use-after-free due to order vm is put and destroyed"

* tag 'drm-fixes-2024-04-19' of https://gitlab.freedesktop.org/drm/kernel:
  drm/radeon: silence UBSAN warning (v3)
  drm/radeon: make -fstrict-flex-arrays=3 happy
  drm/amdgpu: fix visible VRAM handling during faults
  drm/amdgpu: validate the parameters of bo mapping operations more clearly
  Revert "drm/amd/display: fix USB-C flag update after enc10 feature init"
  drm/amdkfd: Fix memory leak in create_process failure
  drm/amdgpu: remove invalid resource->start check v2
  drm/xe/vm: prevent UAF with asid based lookup
  drm/xe: Fix bo leak in intel_fb_bo_framebuffer_init
  drm/panel: novatek-nt36682e: don't unregister DSI device
  drm/panel: visionox-rm69299: don't unregister DSI device
  drm/nouveau/dp: Don't probe eDP ports twice harder
  drm/nouveau/kms/nv50-: Disable AUX bus for disconnected DP ports
  drm/v3d: Don't increment `enabled_ns` twice
  drm/vmwgfx: Sort primary plane formats by order of preference
  drm/vmwgfx: Fix crtc's atomic check conditional
  drm/vmwgfx: Fix prime import/export
  drm/ttm: stop pooling cached NUMA pages v2
  drm: nv04: Fix out of bounds access
  nouveau: fix instmem race condition around ptr stores

Johan writes:

USB-serial device ids for 6.9-rc5

Here are some new modem device ids for 6.9-rc5.

All have been in linux-next with no reported issues.

* tag 'usb-serial-6.9-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: option: add Telit FN920C04 rmnet compositions
  USB: serial: option: add Rolling RW101-GL and RW135-GL support
  USB: serial: option: add Lonsung U8300/U9300 product
  USB: serial: option: add support for Fibocom FM650/FG650
  USB: serial: option: support Quectel EM060K sub-models
  USB: serial: option: add Fibocom FM135-GL variants