Pull ARM SoC fixes from Olof Johansson:
 "A few fixes that have trickled in through the merge window:

   - Video fixes for OMAP due to panel-dpi driver removal

   - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7

   - Fixing arch version on ASpeed ast2500

   - Two fixes for reset handling on ARM SCMI"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: aspeed: ast2500 is ARMv6K
  reset: reset-scmi: add missing handle initialisation
  firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset
  bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  ARM: dts: am3517-evm: Fix missing video
  ARM: dts: logicpd-torpedo-baseboard: Fix missing video
  ARM: omap2plus_defconfig: Fix missing video
  bus: ti-sysc: Fix handling of invalid clocks
  bus: ti-sysc: Fix clock handling for no-idle quirks

Pull more MMC updates from Ulf Hansson:
 "A couple more updates/fixes for MMC:

   - sdhci-pci: Add Genesys Logic GL975x support

   - sdhci-tegra: Recover loss in throughput for DMA

   - sdhci-of-esdhc: Fix DMA bug"

* tag 'mmc-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: host: sdhci-pci: Add Genesys Logic GL975x support
  mmc: tegra: Implement ->set_dma_mask()
  mmc: sdhci: Let drivers define their DMA mask
  mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence
  mmc: sdhci: improve ADMA error reporting

Merge active entropy generation updates.

This is admittedly partly "for discussion".  We need to have a way
forward for the boot time deadlocks where user space ends up waiting for
more entropy, but no entropy is forthcoming because the system is
entirely idle just waiting for something to happen.

While this was triggered by what is arguably a user space bug with
GDM/gnome-session asking for secure randomness during early boot, when
they didn't even need any such truly secure thing, the issue ends up
being that our "getrandom()" interface is prone to that kind of
confusion, because people don't think very hard about whether they want
to block for sufficient amounts of entropy.

The approach here-in is to decide to not just passively wait for entropy
to happen, but to start actively collecting it if it is missing.  This
is not necessarily always possible, but if the architecture has a CPU
cycle counter, there is a fair amount of noise in the exact timings of
reasonably complex loads.

We may end up tweaking the load and the entropy estimates, but this
should be at least a reasonable starting point.

As part of this, we also revert the revert of the ext4 IO pattern
improvement that ended up triggering the reported lack of external
entropy.

* getrandom() active entropy waiting:
  Revert "Revert "ext4: make __ext4_get_inode_loc plug""
  random: try to actively add entropy rather than passively wait for it

For 5.3 we had to revert a nice ext4 IO pattern improvement, because it
caused a bootup regression due to lack of entropy at bootup together
with arguably broken user space that was asking for secure random
numbers when it really didn't need to.

See commit 72dbcf721566 (Revert "ext4: make __ext4_get_inode_loc plug").

This aims to solve the issue by actively generating entropy noise using
the CPU cycle counter when waiting for the random number generator to
initialize.  This only works when you have a high-frequency time stamp
counter available, but that's the case on all modern x86 CPU's, and on
most other modern CPU's too.

What we do is to generate jitter entropy from the CPU cycle counter
under a somewhat complex load: calling the scheduler while also
guaranteeing a certain amount of timing noise by also triggering a
timer.

I'm sure we can tweak this, and that people will want to look at other
alternatives, but there's been a number of papers written on jitter
entropy, and this should really be fairly conservative by crediting one
bit of entropy for every timer-induced jump in the cycle counter.  Not
because the timer itself would be all that unpredictable, but because
the interaction between the timer and the loop is going to be.

Even if (and perhaps particularly if) the timer actually happens on
another CPU, the cacheline interaction between the loop that reads the
cycle counter and the timer itself firing is going to add perturbations
to the cycle counter values that get mixed into the entropy pool.

As Thomas pointed out, with a modern out-of-order CPU, even quite simple
loops show a fair amount of hard-to-predict timing variability even in
the absense of external interrupts.  But this tries to take that further
by actually having a fairly complex interaction.

This is not going to solve the entropy issue for architectures that have
no CPU cycle counter, but it's not clear how (and if) that is solvable,
and the hardware in question is largely starting to be irrelevant.  And
by doing this we can at least avoid some of the even more contentious
approaches (like making the entropy waiting time out in order to avoid
the possibly unbounded waiting).

Cc: Ahmed Darwish <darwish.07@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Nicholas Mc Guire <hofrat@opentech.at>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Alexander E. Patrakov <patrakov@gmail.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixes for omap variants

Few fixes for ti-sysc interconnect target module driver for no-idle
quirks that caused nfsroot to fail on some dra7 boards.

And let's fixes to get LCD working again for logicpd board that got
broken a while back with removal of panel-dpi driver. We need to now
use generic CONFIG_DRM_PANEL_SIMPLE instead.

* tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  ARM: dts: am3517-evm: Fix missing video
  ARM: dts: logicpd-torpedo-baseboard: Fix missing video
  ARM: omap2plus_defconfig: Fix missing video
  bus: ti-sysc: Fix handling of invalid clocks
  bus: ti-sysc: Fix clock handling for no-idle quirks

Link: https://lore.kernel.org/r/pull-1568819401-72461@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM SCMI fixes for v5.4

Couple of fixes: one in scmi reset driver initialising missed scmi handle
and an other in scmi reset API implementation fixing the assignment of
reset state

* tag 'scmi-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  reset: reset-scmi: add missing handle initialisation
  firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset

Link: https://lore.kernel.org/r/20190918142139.GA4370@bogus
Signed-off-by: Olof Johansson <olof@lixom.net>

More libnvdimm updates from Dan Williams:

 - Complete the reworks to interoperate with powerpc dynamic huge page
   sizes

 - Fix a crash due to missed accounting for the powerpc 'struct
   page'-memmap mapping granularity

 - Fix badblock initialization for volatile (DRAM emulated) pmem ranges

 - Stop triggering request_key() notifications to userspace when
   NVDIMM-security is disabled / not present

 - Miscellaneous small fixups

* tag 'libnvdimm-fixes-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm/region: Enable MAP_SYNC for volatile regions
  libnvdimm: prevent nvdimm from requesting key when security is disabled
  libnvdimm/region: Initialize bad block for volatile namespaces
  libnvdimm/nfit_test: Fix acpi_handle redefinition
  libnvdimm/altmap: Track namespace boundaries in altmap
  libnvdimm: Fix endian conversion issues 
  libnvdimm/dax: Pick the right alignment default when creating dax devices
  powerpc/book3s64: Export has_transparent_hugepage() related functions.

Pull thermal SoC updates from Eduardo Valentin:
 "This is a really small pull in the midst of a lot of pending patches.

  We are in the middle of restructuring how we are maintaining the
  thermal subsystem, as per discussion in our last LPC. For now, I am
  sending just some changes that were pending in my tree. Looking
  forward to get a more streamlined process in the next merge window"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal: db8500: Rewrite to be a pure OF sensor
  thermal: db8500: Use dev helper variable
  thermal: db8500: Finalize device tree conversion
  thermal: thermal_mmio: remove some dead code

Pull  more i2c updates from Wolfram Sang:

 - make Lenovo Yoga C630 boot now that the dependencies are merged

 - restore BlockProcessCall for i801, accidently removed in this merge
   window

 - a bugfix for the riic driver

 - an improvement to the slave-eeprom driver which should have been in
   the first pull request but sadly got lost in the process

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: slave-eeprom: Add read only mode
  i2c: i801: Bring back Block Process Call support for certain platforms
  i2c: riic: Clear NACK in tend isr
  i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630

Pull iommu fixes from Joerg Roedel:
 "A couple of fixes for the AMD IOMMU driver have piled up:

   - Some fixes for the reworked IO page-table which caused memory leaks
     or did not allow to downgrade mappings under some conditions.

   - Locking fixes to fix a couple of possible races around accessing
     'struct protection_domain'. The races got introduced when the
     dma-ops path became lock-less in the fast-path"

* tag 'iommu-fixes-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Lock code paths traversing protection_domain->dev_list
  iommu/amd: Lock dev_data in attach/detach code paths
  iommu/amd: Check for busy devices earlier in attach_device()
  iommu/amd: Take domain->lock for complete attach/detach path
  iommu/amd: Remove amd_iommu_devtable_lock
  iommu/amd: Remove domain->updated
  iommu/amd: Wait for completion of IOTLB flush in attach_device
  iommu/amd: Unmap all L7 PTEs when downgrading page-sizes
  iommu/amd: Introduce first_pte_l7() helper
  iommu/amd: Fix downgrading default page-sizes in alloc_pte()
  iommu/amd: Fix pages leak in free_pagetable()