Commit 840f5b0572ea ("media: au0828 disable tuner to demod link in
au0828_media_device_register()") removed all uses of the 'dtv_demod',
but left the variable itself around.
Remove it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull remoteproc fix from Bjorn Andersson: "Fix incorrect error check in the ST remoteproc driver and advertise the newly created linux-remoteproc mailing list" * tag 'rproc-v4.6-rc1' of git://github.com/andersson/remoteproc: MAINTAINERS: Add mailing list for remote processor subsystems remoteproc: st: fix check of syscon_regmap_lookup_by_phandle() return value
Pull SCSI target fixes from Nicholas Bellinger: "This includes fixes from HCH for -rc1 configfs default_groups conversion changes that ended up breaking some iscsi-target default_groups, along with Sagi's ib_drain_qp() conversion for iser-target to use the common caller now available to RDMA kernel consumers in v4.6+ code" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: add a new add_wwn_groups fabrics method target: initialize the nacl base CIT begfore init_nodeacl target: remove ->fabric_cleanup_nodeacl iser-target: Use ib_drain_qp
Commit d4edcf0d5695 ("mm/gup: Switch all callers of get_user_pages() to
not pass tsk/mm") switched get_user_pages() callers to the simpler model
where they no longer pass in the thread and mm pointer. But since then
we've merged changes to a few drivers that re-introduce use of the old
interface. Let's fix them up.
They continued to work fine (thanks to the truly disgusting macros
introduced in commit cde70140fed8: "mm/gup: Overload get_user_pages()
functions"), but cause unnecessary build noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from David Miller:
1) Missing device reference in IPSEC input path results in crashes
during device unregistration. From Subash Abhinov Kasiviswanathan.
2) Per-queue ISR register writes not being done properly in macb
driver, from Cyrille Pitchen.
3) Stats accounting bugs in bcmgenet, from Patri Gynther.
4) Lightweight tunnel's TTL and TOS were swapped in netlink dumps, from
Quentin Armitage.
5) SXGBE driver has off-by-one in probe error paths, from Rasmus
Villemoes.
6) Fix race in save/swap/delete options in netfilter ipset, from
Vishwanath Pai.
7) Ageing time of bridge not set properly when not operating over a
switchdev device. Fix from Haishuang Yan.
8) Fix GRO regression wrt nested FOU/GUE based tunnels, from Alexander
Duyck.
9) IPV6 UDP code bumps wrong stats, from Eric Dumazet.
10) FEC driver should only access registers that actually exist on the
given chipset, fix from Fabio Estevam.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits)
net: mvneta: fix changing MTU when using per-cpu processing
stmmac: fix MDIO settings
Revert "stmmac: Fix 'eth0: No PHY found' regression"
stmmac: fix TX normal DESC
net: mvneta: use cache_line_size() to get cacheline size
net: mvpp2: use cache_line_size() to get cacheline size
net: mvpp2: fix maybe-uninitialized warning
tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter
net: usb: cdc_ncm: adding Telit LE910 V2 mobile broadband card
rtnl: fix msg size calculation in if_nlmsg_size()
fec: Do not access unexisting register in Coldfire
net: mvneta: replace MVNETA_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES
net: mvpp2: replace MVPP2_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES
net: dsa: mv88e6xxx: Clear the PDOWN bit on setup
net: dsa: mv88e6xxx: Introduce _mv88e6xxx_phy_page_{read, write}
bpf: make padding in bpf_tunnel_key explicit
ipv6: udp: fix UDP_MIB_IGNOREDMULTI updates
bnxt_en: Fix ethtool -a reporting.
bnxt_en: Fix typo in bnxt_hwrm_set_pause_common().
bnxt_en: Implement proper firmware message padding.
...
Pull clk fixes from Stephen Boyd: "A handful of const updates for reset ops and a couple fixes to the newly introduced IPQ4019 clock driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: ipq4019: add some fixed clocks for ddrppl and fepll clk: qcom: ipq4019: switch remaining defines to enums clk: qcom: Make reset_control_ops const clk: tegra: Make reset_control_ops const clk: sunxi: Make reset_control_ops const clk: atlas7: Make reset_control_ops const clk: rockchip: Make reset_control_ops const clk: mmp: Make reset_control_ops const clk: mediatek: Make reset_control_ops const
Pull power management and ACPI fix from Rafael J. Wysocki: "Just one fix for a nasty boot failure on some systems based on Intel Skylake that shipped with broken firmware where enabling hardware-coordinated P-states management (HWP) causes a faulty interrupt handler in SMM to be invoked and crash the system (Srinivas Pandruvada)" * tag 'pm+acpi-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / processor: Request native thermal interrupt handling via _OSC
* acpi-processor: ACPI / processor: Request native thermal interrupt handling via _OSC
After enabling per-cpu processing it appeared that under heavy load changing MTU can result in blocking all port's interrupts and transmitting data is not possible after the change. This commit fixes above issue by disabling percpu interrupts for the time, when TXQs and RXQs are reconfigured. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Initially the phy_bus_name was added to manipulate the driver name but it was recently just used to manage the fixed-link and then to take some decision at run-time. So the patch uses the is_pseudo_fixed_link and removes the phy_bus_name variable not necessary anymore. The driver can manage the mdio registration by using phy-handle, dwmac-mdio and own parameter e.g. snps,phy-addr. This patch takes care about all these possible configurations and fixes the mdio registration in case of there is a real transceiver or a switch (that needs to be managed by using fixed-link). Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: Frank Schäfer <fschaefer.oss@googlemail.com> Cc: Gabriel Fernandez <gabriel.fernandez@linaro.org> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Phil Reid <preid@electromag.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>