Pull hwmon subsystem fixes from Jean Delvare. * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (fam15h_power) Tweak runavg_range on resume hwmon: (coretemp) Use get_online_cpus to avoid races involving CPU hotplug hwmon: (via-cputemp) Use get_online_cpus to avoid races involving CPU hotplug
Pull SCSI fixes from James Bottomley: "This is a set of four essential fixes: two oops related (bnx2i, virtio-scsi), one data corruption related (hpsa) and one failure to boot due to interrupt routing issues (mpt2ss). Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] hpsa: fix handling of protocol error [SCSI] mpt2sas: Fix for issue - Unable to boot from the drive connected to HBA [SCSI] bnx2i: Fixed NULL ptr deference for 1G bnx2 Linux iSCSI offload [SCSI] scsi: virtio-scsi: Fix address translation failure of HighMem pages used by sg list
Fix potential NULL pointer dereference in edac_unregister_sysfs() on
system boot introduced in 3.6-rc1.
Since commit 7a623c039 ("edac: rewrite the sysfs code to use struct
device") edac_mc_alloc() no longer initializes embedded kobjects in
struct mem_ctl_info. Therefore edac_mc_free() can no longer simply
decrement a kobject reference count to free the allocated memory unless
the memory controller driver module had also called edac_mc_add_mc().
Now edac_mc_free() will check if the newly embedded struct device has
been registered with sysfs before using either the standard device
release functions or freeing the data structures itself with logic
pulled out of the error path of edac_mc_alloc().
The BUG this patch resolves for me:
BUG: unable to handle kernel NULL pointer dereference at (null)
EIP is at __wake_up_common+0x1a/0x6a
Process modprobe (pid: 933, ti=f3dc6000 task=f3db9520 task.ti=f3dc6000)
Call Trace:
complete_all+0x3f/0x50
device_pm_remove+0x23/0xa2
device_del+0x34/0x142
edac_unregister_sysfs+0x3b/0x5c [edac_core]
edac_mc_free+0x29/0x2f [edac_core]
e7xxx_probe1+0x268/0x311 [e7xxx_edac]
e7xxx_init_one+0x56/0x61 [e7xxx_edac]
local_pci_probe+0x13/0x15
...
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
coccinelle warns about:
+ drivers/edac/edac_mc.c:429:9-23: ERROR: reference preceded by free on line 429
421 if (mci->csrows) {
> 422 for (chn = 0; chn < tot_channels; chn++) {
423 csr = mci->csrows[chn];
424 if (csr) {
> 425 for (chn = 0; chn < tot_channels; chn++)
426 kfree(csr->channels[chn]);
427 kfree(csr);
428 }
> 429 kfree(mci->csrows[i]);
430 }
431 kfree(mci->csrows);
432 }
and that code block seem to mess things up in several ways (double free, memory
leak, out-of-bound reads etc.):
L422: The iterator "chn" and bound "tot_channels" are totally wrong. Should be
"row" and "tot_csrows" respectively. Which means either memory leak, or
out-of-bound reads (which if does not trigger an immediate page fault
error, will further lead to kfree() on random addresses).
L425: The inner loop is reusing the same iterator "chn" as the outer loop,
which could lead to premature end of the outer loop, and hence memory leak.
L429: The array index 'i' in mci->csrows[i] is a temporary value used in
previous loops, and won't change at all in the current loop. Which
means either out-of-bound read and possibly kfree(random number), or the
same mci->csrows[i] get freed once and again, and possibly double free
for the kfree(csr) in L427.
L426/L427: a kfree(csr->channels) is needed in between to avoid leaking the memory.
The buggy code was introduced by commit de3910eb ("edac: change the mem
allocation scheme to make Documentation/kobject.txt happy") in the 3.6-rc1
merge window. Fix it by freeing up resources in this order:
free csrows[i]->channels[j]
free csrows[i]->channels
free csrows[i]
free csrows
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
CC: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The quirk introduced with commit 00250ec90963b7ef6678438888f3244985ecde14 (hwmon: fam15h_power: fix bogus values with current BIOSes) is not only required during driver load but also when system resumes from suspend. The BIOS might set the previously recommended (but unsuitable) initilization value for the running average range register during resume. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Tested-by: Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@vger.kernel.org # 3.0+
coretemp_init loops with for_each_online_cpu, adding platform_devices and sysfs interfaces, then calls register_hotcpu_notifier. There is a race if a CPU is offlined or onlined after the loop, but before register_hotcpu_notifier. The race might result in the absence of a platform_device+sysfs interface for an online CPU, or the presence of a platform_device+sysfs interface for an offline CPU. A similar race occurs during coretemp_exit, after the module calls unregister_hotcpu_notifier, but before it unregisters all devices, a CPU might offline and a device for an offline CPU will exist for a short while. This fix surrounds for_each_online_cpu and register_hotcpu_notifier with get_online_cpus+put_online_cpus; and surrounds unregister_hotcpu_notifier and device unregistering with get_online_cpus+put_online_cpus. Build tested. Signed-off-by: Silas Boyd-Wickizer <sbw@mit.edu> Signed-off-by: Jean Delvare <khali@linux-fr.org>
via_cputemp_init loops with for_each_online_cpu, adding platform_devices, then calls register_hotcpu_notifier. If a CPU is offlined between the loop and register_hotcpu_notifier, then later onlined, via_cputemp_device_add will attempt to add platform devices with the same ID. A similar race occurs during via_cputemp_exit, after the module calls unregister_hotcpu_notifier, a CPU might offline and a device will exist for a CPU that is offline. This fix surrounds for_each_online_cpu and register_hotcpu_notifier with get_online_cpus+put_online_cpus; and surrounds unregister_hotcpu_notifier and device unregistering with get_online_cpus+put_online_cpus. Build tested. Signed-off-by: Silas Boyd-Wickizer <sbw@mit.edu> Acked-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Pull ARM and clkdev fixes from Russell King: "Two patches for clkdev which resolve the long standing issue that the devm_* versions were dependent on clkdev, which they shouldn't have been. Instead, they're dependent on HAVE_CLK instead, which implies that you're providing clk_get() and clk_put(). A small fix to the ARM decompressor to ensure that the page tables are properly interpreted by the CPU, and reserve syscall 378 for kcmp (the checksyscalls.sh script is unfortunately currently broken so arch maintainers aren't getting notified of new syscalls...) Lastly, a larger fix for an issue between the common clk subsystem and smp_twd which causes warnings to be spat out." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: reserve syscall 378 for kcmp ARM: 7535/1: Reprogram smp_twd based on new common clk framework notifiers ARM: 7537/1: clk: Fix release in devm_clk_put() ARM: 7532/1: decompressor: reset SCTLR.TRE for VMSA ARMv7 cores ARM: 7534/1: clk: Make the managed clk functions generically available
Pull HID fixes from Jiri Kosina: "The most important fix is Logitech Unifying receiver regression in device enumeration fix from Nestor Lopez Casado. In addition to that, there is a small memory leak fix for Thinkpad keyboard driver from Axel Lin." * 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Fix logitech-dj: missing Unifying device issue HID: lenovo-tpkbd: Fix memory leak in tpkbd_remove_tp()
This patch fixes an issue introduced after commit 4ea5454203d991ec
("HID: Fix race condition between driver core and ll-driver").
After that commit, hid-core discards any incoming packet that arrives while
hid driver's probe function is being executed.
This broke the enumeration process of hid-logitech-dj, that must receive
control packets in-band with the mouse and keyboard packets. Discarding mouse
or keyboard data at the very begining is usually fine, but it is not the case
for control packets.
This patch forces a re-enumeration of the paired devices when a packet arrives
that comes from an unknown device.
Based on a patch originally written by Benjamin Tissoires.
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>