linux.git/drivers, branch v3.4-rc7

Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6

2012-05-13T00:24:29+00:00

Pull a few more GPIO bug fixes from Grant Likely:
 "Oops, missed a couple.  Here's an updated pull req for GPIO"

A set of PCH bug fixes, and one patch to fix up compile warnings

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  gpio/exynos: Fix compiler warnings when non-exynos machines are selected
  gpio: pch9: Use proper flow type handlers

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2012-05-12T20:02:31+00:00

Pull SCSI fixes from James Bottomley:
 "This is a set of minor qla and virto fixes plus one major regression
  fix (oops in all legacy host drivers)."

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] virtio_scsi: fix TMF use-after-free
  [SCSI] fix oops in all legacy host adapters caused by 6f381fa
  [SCSI] qla2xxx: Update version number to 8.04.00.03-k.
  [SCSI] qla2xxx: Properly check for current state after the fabric-login request.
  [SCSI] qla2xxx: Proper completion to scsi-ml for scsi status task_set_full and busy.
  [SCSI] qla2xxx: Block flash access from application when device is initialized for ISP82xx.
  [SCSI] qla2xxx: Fix reset time out as qla2xxx not ack to reset request.

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2012-05-12T19:57:01+00:00

Pull networking fixes from David S. Miller:

 1) Since we do RCU lookups on ipv4 FIB entries, we have to test if the
    entry is dead before returning it to our caller.

 2) openvswitch locking and packet validation fixes from Ansis Atteka,
    Jesse Gross, and Pravin B Shelar.

 3) Fix PM resume locking in IGB driver, from Benjamin Poirier.

 4) Fix VLAN header handling in vhost-net and macvtap, from Basil Gor.

 5) Revert a bogus network namespace isolation change that was causing
    regressions on S390 networking devices.

 6) If bonding decides to process and handle a LACPDU frame, we
    shouldn't bump the rx_dropped counter.  From Jiri Bohac.

 7) Fix mis-calculation of available TX space in r8169 driver when doing
    TSO, which can lead to crashes and/or hung device.  From Julien
    Ducourthial.

 8) SCTP does not validate cached routes properly in all cases, from
    Nicolas Dichtel.

 9) Link status interrupt needs to be handled in ks8851 driver, from
    Stephen Boyd.

10) Use capable(), not cap_raised(), in connector/userns netlink code.
    From Eric W. Biederman via Andrew Morton.

11) Fix pktgen OOPS on module unload, from Eric Dumazet.

12) iwlwifi under-estimates SKB truesizes, also from Eric Dumazet.

13) Cure division by zero in SFC driver, from Ben Hutchings.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
  ks8851: Update link status during link change interrupt
  macvtap: restore vlan header on user read
  vhost-net: fix handle_rx buffer size
  bonding: don't increase rx_dropped after processing LACPDUs
  connector/userns: replace netlink uses of cap_raised() with capable()
  sctp: check cached dst before using it
  pktgen: fix crash at module unload
  Revert "net: maintain namespace isolation between vlan and real device"
  ehea: fix losing of NEQ events when one event occurred early
  igb: fix rtnl race in PM resume path
  ipv4: Do not use dead fib_info entries.
  r8169: fix unsigned int wraparound with TSO
  sfc: Fix division by zero when using one RX channel and no SR-IOV
  openvswitch: Validation of IPv6 set port action uses IPv4 header
  net: compare_ether_addr[_64bits]() has no ordering
  cdc_ether: Ignore bogus union descriptor for RNDIS devices
  bnx2x: bug fix when loading after SAN boot
  e1000: Silence sparse warnings by correcting type
  igb, ixgbe: netdev_tx_reset_queue incorrectly called from tx init path
  openvswitch: Release rtnl_lock if ovs_vport_cmd_build_info() failed.
  ...

Merge tag 'dm-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm

2012-05-12T19:56:08+00:00

Pull device-mapper fixes from Alasdair G Kergon:
 "Fix a couple of serious memory leaks in device-mapper thin
  provisioning and tidy its MODULE_DESCRIPTION.

  Mitigate occasional reported hangs associated with multipath scsi_dh
  module loading."

* tag 'dm-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm mpath: check if scsi_dh module already loaded before trying to load
  dm thin: correct module description
  dm thin: fix unprotected use of prepared_discards list
  dm thin: reinstate missing mempool_free in cell_release_singleton

dm mpath: check if scsi_dh module already loaded before trying to load

2012-05-12T00:43:21+00:00

If the requested scsi_dh module is already loaded then skip
request_module().

Multipath table loads can hang in an unnecessary __request_module.

Reported-by: Ben Marzinski 
Cc: stable@kernel.org
Signed-off-by: Mike Snitzer 
Signed-off-by: Alasdair G Kergon

dm thin: correct module description

2012-05-12T00:43:19+00:00

Remove duplicate copy of string "device-mapper" (DM_NAME) from
MODULE_DESCRIPTION.

Signed-off-by: Alasdair G Kergon

dm thin: fix unprotected use of prepared_discards list

2012-05-12T00:43:16+00:00

Fix two places in commit 104655fd4dce ("dm thin: support discards") that
didn't use pool->lock to protect against concurrent changes to the
prepared_discards list.

Without this fix, thin_endio() can race with process_discard(), leading
to concurrent list_add()s that result in the processes locking up with
an error like the following:

WARNING: at lib/list_debug.c:32 __list_add+0x8f/0xa0()
...
list_add corruption. next->prev should be prev (ffff880323b96140), but was ffff8801d2c48440. (next=ffff8801d2c485c0).
...
Pid: 17205, comm: kworker/u:1 Tainted: G        W  O 3.4.0-rc3.snitm+ #1
Call Trace:
 [] warn_slowpath_common+0x7f/0xc0
 [] warn_slowpath_fmt+0x46/0x50
 [] ? bio_detain+0xc6/0x210 [dm_thin_pool]
 [] __list_add+0x8f/0xa0
 [] process_discard+0x2a2/0x2d0 [dm_thin_pool]
 [] ? remap_and_issue+0x38/0x50 [dm_thin_pool]
 [] process_deferred_bios+0x7b/0x230 [dm_thin_pool]
 [] ? process_deferred_bios+0x230/0x230 [dm_thin_pool]
 [] do_worker+0x52/0x60 [dm_thin_pool]
 [] process_one_work+0x129/0x450
 [] worker_thread+0x17c/0x3c0
 [] ? manage_workers+0x120/0x120
 [] kthread+0x9e/0xb0
 [] kernel_thread_helper+0x4/0x10
 [] ? kthread_freezable_should_stop+0x70/0x70
 [] ? gs_change+0x13/0x13
---[ end trace 7e0a523bc5e52692 ]---

Signed-off-by: Mike Snitzer 
Signed-off-by: Alasdair G Kergon

dm thin: reinstate missing mempool_free in cell_release_singleton

2012-05-12T00:43:12+00:00

Fix a significant memory leak inadvertently introduced during
simplification of cell_release_singleton() in commit
6f94a4c45a6f744383f9f695dde019998db3df55 ("dm thin: fix stacked bi_next
usage").

A cell's hlist_del() must be accompanied by a mempool_free().
Use __cell_release() to do this, like before.

Signed-off-by: Mike Snitzer 
Signed-off-by: Alasdair G Kergon

gpio/exynos: Fix compiler warnings when non-exynos machines are selected

2012-05-12T00:25:53+00:00

Fixes the following compiler warnings:

drivers/gpio/gpio-samsung.c: In function ‘samsung_gpiolib_init’:
drivers/gpio/gpio-samsung.c:2980:1: warning: label ‘err_ioremap1’ defined but not used [-Wunused-label]
drivers/gpio/gpio-samsung.c:2978:1: warning: label ‘err_ioremap2’ defined but not used [-Wunused-label]
drivers/gpio/gpio-samsung.c:2976:1: warning: label ‘err_ioremap3’ defined but not used [-Wunused-label]
drivers/gpio/gpio-samsung.c:2974:1: warning: label ‘err_ioremap4’ defined but not used [-Wunused-label]
drivers/gpio/gpio-samsung.c:2722:55: warning: unused variable ‘gpio_base4’ [-Wunused-variable]

drivers/gpio/gpio-samsung.c:455:32: warning: ‘exynos_gpio_cfg’ defined but not used [-Wunused-variable]
drivers/gpio/gpio-samsung.c:2126:33: warning: ‘exynos4_gpios_1’ defined but not used [-Wunused-variable]
drivers/gpio/gpio-samsung.c:2228:33: warning: ‘exynos4_gpios_2’ defined but not used [-Wunused-variable]
drivers/gpio/gpio-samsung.c:2373:33: warning: ‘exynos4_gpios_3’ defined but not used [-Wunused-variable]

Signed-off-by: Sachin Kamat 
Signed-off-by: Grant Likely

gpio: pch9: Use proper flow type handlers

2012-05-12T00:18:50+00:00

Jean-Francois Dagenais reported:

 Configuring a gpio pin with the gpio-pch driver with
 "IRQF_TRIGGER_LOW | IRQF_ONESHOT" generates an interrupt storm for
 threaded ISR until the ISR thread actually gets to physically clear
 the interrupt on the triggering chip!! The immediate observable
 symptom is the high CPU usage for my ISR thread task and the
 interrupt count in /proc/interrupts incrementing radically.

The driver is wrong in several ways:

1) Using handle_simple_irq() does not provide proper flow control
   handling. In the case of oneshot threaded handlers for the
   demultiplexed interrupts this results in an interrupt storm because
   the simple handler does not deal with masking/unmasking.  Even
   without threaded oneshot handlers an interrupt storm for level type
   interrupts can easily be triggered when the interrupt is disabled
   and the interrupt line is activated from the device.

2) Acknowlegding the demultiplexed interrupt before calling the
   handler is wrong for level type interrupts.

3) The set_type function unconditionally enables the interrupt. It's
   supposed to set the type and nothing else. The unmasking is done by
   the core code.

Move the acknowledge code into a separate function and add it to the
demux irqchip callbacks.

Remove the unconditional enabling from the set_type() callback and set
the proper flow handlers depending on the selected type (level/edge).

Reported-and-tested-by: Jean-Francois Dagenais 
Signed-off-by: Thomas Gleixner 
Signed-off-by: Grant Likely