linux.git/drivers/video, branch v6.2-rc5 Linux kernel source tree Merge tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip 2023-01-12T23:02:20+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-01-12T23:02:20+00:00 bad8c4a850eaf386df681d951e3afc06bf1c7cf8 Pull xen fixes from Juergen Gross: - two cleanup patches - a fix of a memory leak in the Xen pvfront driver - a fix of a locking issue in the Xen hypervisor console driver * tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvcalls: free active map buffer on pvcalls_front_free_map hvc/xen: lock console list traversal x86/xen: Remove the unused function p2m_index() xen: make remove callback of xen driver void returned 
Pull xen fixes from Juergen Gross:

 - two cleanup patches

 - a fix of a memory leak in the Xen pvfront driver

 - a fix of a locking issue in the Xen hypervisor console driver

* tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/pvcalls: free active map buffer on pvcalls_front_free_map
  hvc/xen: lock console list traversal
  x86/xen: Remove the unused function p2m_index()
  xen: make remove callback of xen driver void returned
fbdev: omapfb: avoid stack overflow warning 2023-01-05T10:43:27+00:00 Arnd Bergmann arnd@arndb.de 2022-12-15T17:02:28+00:00 634cf6ead93988b0da9ac054521ab63a3ba189db The dsi_irq_stats structure is a little too big to fit on the stack of a 32-bit task, depending on the specific gcc options: fbdev/omap2/omapfb/dss/dsi.c: In function 'dsi_dump_dsidev_irqs': fbdev/omap2/omapfb/dss/dsi.c:1621:1: error: the frame size of 1064 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Since this is only a debugfs file, performance is not critical, so just dynamically allocate it, and print an error message in there in place of a failure code when the allocation fails. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Helge Deller <deller@gmx.de> 
The dsi_irq_stats structure is a little too big to fit on the
stack of a 32-bit task, depending on the specific gcc options:

fbdev/omap2/omapfb/dss/dsi.c: In function 'dsi_dump_dsidev_irqs':
fbdev/omap2/omapfb/dss/dsi.c:1621:1: error: the frame size of 1064 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

Since this is only a debugfs file, performance is not critical,
so just dynamically allocate it, and print an error message
in there in place of a failure code when the allocation fails.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
fbdev: matroxfb: G200eW: Increase max memory from 1 MB to 16 MB 2023-01-02T14:46:41+00:00 Paul Menzel pmenzel@molgen.mpg.de 2023-01-02T13:57:30+00:00 f685dd7a8025f2554f73748cfdb8143a21fb92c7 Commit 62d89a7d49af ("video: fbdev: matroxfb: set maxvram of vbG200eW to the same as vbG200 to avoid black screen") accidently decreases the maximum memory size for the Matrox G200eW (102b:0532) from 8 MB to 1 MB by missing one zero. This caused the driver initialization to fail with the messages below, as the minimum required VRAM size is 2 MB: [ 9.436420] matroxfb: Matrox MGA-G200eW (PCI) detected [ 9.444502] matroxfb: cannot determine memory size [ 9.449316] matroxfb: probe of 0000:0a:03.0 failed with error -1 So, add the missing 0 to make it the intended 16 MB. Successfully tested on the Dell PowerEdge R910/0KYD3D, BIOS 2.10.0 08/29/2013, that the warning is gone. While at it, add a leading 0 to the maxdisplayable entry, so it’s aligned properly. The value could probably also be increased from 8 MB to 16 MB, as the G200 uses the same values, but I have not checked any datasheet. Note, matroxfb is obsolete and superseded by the maintained DRM driver mga200, which is used by default on most systems where both drivers are available. Therefore, on most systems it was only a cosmetic issue. Fixes: 62d89a7d49af ("video: fbdev: matroxfb: set maxvram of vbG200eW to the same as vbG200 to avoid black screen") Link: https://lore.kernel.org/linux-fbdev/972999d3-b75d-5680-fcef-6e6905c52ac5@suse.de/T/#mb6953a9995ebd18acc8552f99d6db39787aec775 Cc: it+linux-fbdev@molgen.mpg.de Cc: Z. Liu <liuzx@knownsec.com> Cc: Rich Felker <dalias@libc.org> Cc: stable@vger.kernel.org Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Helge Deller <deller@gmx.de> 
Commit 62d89a7d49af ("video: fbdev: matroxfb: set maxvram of vbG200eW to
the same as vbG200 to avoid black screen") accidently decreases the
maximum memory size for the Matrox G200eW (102b:0532) from 8 MB to 1 MB
by missing one zero. This caused the driver initialization to fail with
the messages below, as the minimum required VRAM size is 2 MB:

     [    9.436420] matroxfb: Matrox MGA-G200eW (PCI) detected
     [    9.444502] matroxfb: cannot determine memory size
     [    9.449316] matroxfb: probe of 0000:0a:03.0 failed with error -1

So, add the missing 0 to make it the intended 16 MB. Successfully tested on
the Dell PowerEdge R910/0KYD3D, BIOS 2.10.0 08/29/2013, that the warning is
gone.

While at it, add a leading 0 to the maxdisplayable entry, so it’s aligned
properly. The value could probably also be increased from 8 MB to 16 MB, as
the G200 uses the same values, but I have not checked any datasheet.

Note, matroxfb is obsolete and superseded by the maintained DRM driver
mga200, which is used by default on most systems where both drivers are
available. Therefore, on most systems it was only a cosmetic issue.

Fixes: 62d89a7d49af ("video: fbdev: matroxfb: set maxvram of vbG200eW to the same as vbG200 to avoid black screen")
Link: https://lore.kernel.org/linux-fbdev/972999d3-b75d-5680-fcef-6e6905c52ac5@suse.de/T/#mb6953a9995ebd18acc8552f99d6db39787aec775
Cc: it+linux-fbdev@molgen.mpg.de
Cc: Z. Liu <liuzx@knownsec.com>
Cc: Rich Felker <dalias@libc.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Helge Deller <deller@gmx.de>
fbdev: atyfb: use strscpy() to instead of strncpy() 2022-12-28T08:00:17+00:00 Xu Panda xu.panda@zte.com.cn 2022-12-28T01:44:11+00:00 6b90032c73405cd4da29ab914df11fd1be960b99 The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL-terminated strings. Signed-off-by: Xu Panda <xu.panda@zte.com.cn> Signed-off-by: Yang Yang <yang.yang29@zte.com> Signed-off-by: Helge Deller <deller@gmx.de> 
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL-terminated strings.

Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Signed-off-by: Helge Deller <deller@gmx.de>
fbdev: omapfb: use strscpy() to instead of strncpy() 2022-12-28T08:00:16+00:00 Xu Panda xu.panda@zte.com.cn 2022-12-28T01:40:01+00:00 8d8cf163c8d8c93bccf0c70a133309693af9bf61 The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL-terminated strings. Signed-off-by: Xu Panda <xu.panda@zte.com.cn> Signed-off-by: Yang Yang <yang.yang29@zte.com> Signed-off-by: Helge Deller <deller@gmx.de> 
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL-terminated strings.

Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Signed-off-by: Helge Deller <deller@gmx.de>
fbdev: make offb driver tristate 2022-12-27T21:01:45+00:00 Randy Dunlap rdunlap@infradead.org 2022-11-26T00:04:01+00:00 9d8b5376cc2848ca22314fdec9a7a45b1bf69189 Make the offb (Open Firmware frame buffer) driver tristate, i.e., so that it can be built as a loadable module. However, it still depends on the setting of DRM_OFDRM so that both of these drivers cannot be builtin at the same time nor can one be builtin and the other one a loadable module. Build-tested successfully with all combination of DRM_OFDRM and FB_OF. This fixes a build issue that Michal reported when FB_OF=y and DRM_OFDRM=m: powerpc64-linux-ld: drivers/video/fbdev/offb.o:(.data.rel.ro+0x58): undefined reference to `cfb_fillrect' powerpc64-linux-ld: drivers/video/fbdev/offb.o:(.data.rel.ro+0x60): undefined reference to `cfb_copyarea' powerpc64-linux-ld: drivers/video/fbdev/offb.o:(.data.rel.ro+0x68): undefined reference to `cfb_imageblit' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Arnd Bergmann <arnd@arndb.de> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Michal Suchánek <msuchanek@suse.de> Cc: linuxppc-dev@lists.ozlabs.org Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Helge Deller <deller@gmx.de> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Helge Deller <deller@gmx.de> 
Make the offb (Open Firmware frame buffer) driver tristate,
i.e., so that it can be built as a loadable module.

However, it still depends on the setting of DRM_OFDRM
so that both of these drivers cannot be builtin at the same time
nor can one be builtin and the other one a loadable module.

Build-tested successfully with all combination of DRM_OFDRM and FB_OF.

This fixes a build issue that Michal reported when FB_OF=y and
DRM_OFDRM=m:

powerpc64-linux-ld: drivers/video/fbdev/offb.o:(.data.rel.ro+0x58): undefined reference to `cfb_fillrect'
powerpc64-linux-ld: drivers/video/fbdev/offb.o:(.data.rel.ro+0x60): undefined reference to `cfb_copyarea'
powerpc64-linux-ld: drivers/video/fbdev/offb.o:(.data.rel.ro+0x68): undefined reference to `cfb_imageblit'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Michal Suchánek <msuchanek@suse.de>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Merge tag 'backlight-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight 2022-12-21T17:24:39+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-12-21T17:24:39+00:00 ec34c2b4ec383766a42ffd9206dc6605be3c6f6c Pull backlight update from Lee Jones: "Convert a bunch of I2C class drivers over to .probe_new()" * tag 'backlight-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: tosa: Convert to i2c's .probe_new() backlight: lv5207lp: Convert to i2c's .probe_new() backlight: lp855x: Convert to i2c's .probe_new() backlight: lm3639: Convert to i2c's .probe_new() backlight: lm3630a: Convert to i2c's .probe_new() backlight: bd6107: Convert to i2c's .probe_new() backlight: arcxcnn: Convert to i2c's .probe_new() backlight: adp8870: Convert to i2c's .probe_new() backlight: adp8860: Convert to i2c's .probe_new() 
Pull backlight update from Lee Jones:
 "Convert a bunch of I2C class drivers over to .probe_new()"

* tag 'backlight-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: tosa: Convert to i2c's .probe_new()
  backlight: lv5207lp: Convert to i2c's .probe_new()
  backlight: lp855x: Convert to i2c's .probe_new()
  backlight: lm3639: Convert to i2c's .probe_new()
  backlight: lm3630a: Convert to i2c's .probe_new()
  backlight: bd6107: Convert to i2c's .probe_new()
  backlight: arcxcnn: Convert to i2c's .probe_new()
  backlight: adp8870: Convert to i2c's .probe_new()
  backlight: adp8860: Convert to i2c's .probe_new()
xen: make remove callback of xen driver void returned 2022-12-15T15:06:10+00:00 Dawei Li set_pte_at@outlook.com 2022-12-13T15:46:52+00:00 7cffcade57a429667447c4f41d8414bbcf1b3aaa Since commit fc7a6209d571 ("bus: Make remove callback return void") forces bus_type::remove be void-returned, it doesn't make much sense for any bus based driver implementing remove callbalk to return non-void to its caller. This change is for xen bus based drivers. Acked-by: Juergen Gross <jgross@suse.com> Signed-off-by: Dawei Li <set_pte_at@outlook.com> Link: https://lore.kernel.org/r/TYCP286MB23238119AB4DF190997075C9CAE39@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM Signed-off-by: Juergen Gross <jgross@suse.com> 
Since commit fc7a6209d571 ("bus: Make remove callback return void")
forces bus_type::remove be void-returned, it doesn't make much sense for
any bus based driver implementing remove callbalk to return non-void to
its caller.

This change is for xen bus based drivers.

Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Link: https://lore.kernel.org/r/TYCP286MB23238119AB4DF190997075C9CAE39@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Juergen Gross <jgross@suse.com>
fbdev: fbcon: release buffer when fbcon_do_set_font() failed 2022-12-14T19:01:51+00:00 Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp 2022-12-05T22:10:31+00:00 3c3bfb8586f848317ceba5d777e11204ba3e5758 syzbot is reporting memory leak at fbcon_do_set_font() [1], for commit a5a923038d70 ("fbdev: fbcon: Properly revert changes when vc_resize() failed") missed that the buffer might be newly allocated by fbcon_set_font(). Link: https://syzkaller.appspot.com/bug?extid=25bdb7b1703639abd498 [1] Reported-by: syzbot <syzbot+25bdb7b1703639abd498@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: syzbot <syzbot+25bdb7b1703639abd498@syzkaller.appspotmail.com> Fixes: a5a923038d70 ("fbdev: fbcon: Properly revert changes when vc_resize() failed") CC: stable@vger.kernel.org # 5.15+ Signed-off-by: Helge Deller <deller@gmx.de> 
syzbot is reporting memory leak at fbcon_do_set_font() [1], for
commit a5a923038d70 ("fbdev: fbcon: Properly revert changes when
vc_resize() failed") missed that the buffer might be newly allocated
by fbcon_set_font().

Link: https://syzkaller.appspot.com/bug?extid=25bdb7b1703639abd498 [1]
Reported-by: syzbot <syzbot+25bdb7b1703639abd498@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+25bdb7b1703639abd498@syzkaller.appspotmail.com>
Fixes: a5a923038d70 ("fbdev: fbcon: Properly revert changes when vc_resize() failed")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Helge Deller <deller@gmx.de>
fbdev: sh_mobile_lcdcfb: use sysfs_emit() to instead of scnprintf() 2022-12-14T19:01:51+00:00 ye xingchen ye.xingchen@zte.com.cn 2022-12-05T08:31:39+00:00 b20a558d377c73ed1eb1247046a5e16fe41da173 Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Helge Deller <deller@gmx.de> 
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>